Burnaby Homeowners · Licensed & Insured
Boiler Installation in Burnaby, BC
High-efficiency boiler installation and replacement for Burnaby homes - licensed, permitted, and done right by a Metro Vancouver team that has served the region since 1999.
By the CANRO Heating & Cooling technical team · Licensed HVAC & gas-fitting contractor, Metro Vancouver · Last updated May 2026
⚡ Quick answer
CANRO provides high-efficiency boiler installation and replacement across Burnaby and all of Metro Vancouver. We size to your home's true heat loss, get the near-boiler piping, venting and condensate right, commission with combustion analysis, and file your FortisBC rebate on qualifying condensing units. We are TSBC-licensed and have served the region since 1999 - call (604) 359-1081 for boiler installation in Burnaby.
TSBC-Licensed Gas FittersRed Seal HVACWorkSafeBC InsuredPermitted & Inspected InstallsServing Metro Vancouver Since 1999We File Your Rebates
Boiler Installation for Burnaby homes
Replacing a boiler is more involved than swapping a furnace - sizing, near-boiler piping, venting and controls all matter. CANRO installs high-efficiency condensing boilers and combi units the right way. Burnaby is CANRO's home base - and home to everything from post-war bungalows and Vancouver Specials to hillside houses on Capitol Hill and Burnaby Mountain and the towers of Metrotown, Brentwood and Lougheed.
A huge range of home ages means we see it all here - aging furnaces and boilers in older houses, and high-efficiency systems and heat pumps in newer builds and condos. Burnaby has a mild coastal winter, with cooler, snowier pockets up on Burnaby Mountain, and we factor that into every recommendation. As a Burnaby-based company we reach every Burnaby neighbourhood fast - and we know the permit process at Burnaby City Hall inside out.
When to replace your boiler
- Your boiler is 15-25+ years old and inefficient
- Rising gas bills from a low-efficiency unit
- Frequent repairs, or parts becoming hard to find
- You want combined heat and domestic hot water (a combi boiler)
- Uneven heating you want properly re-zoned
- You want to qualify for FortisBC high-efficiency rebates
How we install your new boiler
- Proper sizing to your home's heat loss - not just matching the old BTU rating
- Condensing boiler or combi options explained, with honest pros and cons
- Correct near-boiler piping, venting and condensate handling
- Permit, install, and combustion-analysis commissioning
- We file your FortisBC / CleanBC rebate paperwork
Brands we work with
We install and service Navien, Viessmann, IBC, Lochinvar, Weil-McLain, Triangle Tube, Bosch and Buderus - and we will work on whatever you already have. Our recommendations are based on what fits your Burnaby home and budget, never on what we are pushing this month.
Local note for Burnaby
As a Burnaby-based company we reach every Burnaby neighbourhood fast - and we know the permit process at Burnaby City Hall inside out.
Serving every Burnaby neighbourhood
We serve every Burnaby neighbourhood - including Metrotown, Brentwood, Lougheed, Capitol Hill, Burnaby Heights, Deer Lake, Edmonds and Burquitlam - and the nearby communities of Vancouver, New Westminster, Coquitlam. Burnaby is CANRO's home base - and home to everything from post-war bungalows and Vancouver Specials to hillside houses on Capitol Hill and Burnaby Mountain and the towers of Metrotown, Brentwood and Lougheed.
Frequently asked questions
How much does a new boiler cost in Burnaby?+
A high-efficiency condensing boiler typically runs about $7,000-$13,000 installed, depending on whether it is heat-only or a combi (heat + hot water), the complexity of the piping, and venting. We quote firmly and apply any FortisBC rebate the unit qualifies for.
What's a combi boiler, and is it right for my home?+
A combi boiler provides both your heating and your domestic hot water from one wall-hung unit - no separate tank - which saves space and can save energy. It is a great fit for many Burnaby homes, though very high simultaneous hot-water demand can favour a system boiler with a tank. We size it to your household.
Should I switch from a boiler to a heat pump?+
Not necessarily. If you have a hydronic system you like, a high-efficiency boiler keeps it going affordably. But air-to-water heat pumps and hybrid setups are now viable for some homes and unlock bigger rebates. We give you the honest comparison for your situation.
Are there rebates for a high-efficiency boiler in Burnaby?+
Yes - FortisBC has typically offered around $1,000-$1,500 for a qualifying ENERGY STAR condensing boiler. We confirm the model qualifies before installing and file the paperwork for you.
Need boiler installation in Burnaby?
Call CANRO for honest advice and a firm price on boiler installation anywhere in Burnaby and Metro Vancouver. Licensed, insured and local since 1999.
Frequently asked questions
How often should a boiler be serviced?
Annual servicing is recommended for all residential boilers. CANRO's annual service includes combustion analysis, heat exchanger inspection, expansion tank pressure check, condensate trap cleaning, and a full safety check. Annual maintenance is also required to keep most manufacturer warranties valid.
How much does a new boiler cost in Vancouver?
A typical residential high-efficiency gas boiler in Metro Vancouver costs $7,500–$15,000 installed, depending on size, brand, and whether the system is heating only or a combi unit that also handles hot water. CANRO provides a free written quote with three options at different price points.
How long does a boiler last?
A well-maintained cast-iron boiler can last 25–30 years, a modern high-efficiency condensing boiler typically lasts 15–20 years, and a combi boiler 12–18 years. Annual servicing has the single biggest impact on lifespan.
My boiler is making a banging or kettling noise. Is that dangerous?
Kettling (a banging or whistling sound) is usually caused by limescale build-up on the heat exchanger and is a sign the system is overheating in localised spots. It will not always cause immediate failure but it shortens the life of the boiler and should be addressed within a few weeks.
Do you service Viessmann, IBC, Baxi, Laars, and Weil-McLain boilers?
Yes. CANRO is one of the few HVAC companies in the Lower Mainland with deep experience on European and high-end North American boilers including Viessmann, IBC, Baxi, Laars, Weil-McLain, NTI, Navien and Rinnai. We carry common parts in the truck.
Should I repair or replace my old boiler?
A useful rule: if the boiler is more than 15 years old and the repair cost is more than 50% of replacement, replacement is the better investment. CANRO will give you both a repair quote and a replacement quote and let you decide.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
