Boiler repair in Haney, Maple Ridge generally lands between $250 and $1,800, with most calls settling near $400-$900.
Tell us what you need—we’ll call you back fast.
Quick answer
A gas boiler repair for a Haney, Maple Ridge home usually costs $250-$1,800, with most jobs coming in around $400-$900. Nothing here is a quote — it is a 2026 market ballpark, and CANRO's certified gas technicians only give you a firm price once they have assessed the actual equipment and access. The diagnostic visit itself runs $90-$150, credited toward the repair, and licensed labour is billed at $95-$165 an hour.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Boiler repair cost tracks the part that's failed far more than the size of the house. An igniter or a stuck zone valve is a quick, low-cost fix. A gas valve, control board, or heat exchanger issue takes longer and involves a pricier part, which is why the same word — 'repair' — can mean anything from a couple hundred dollars to well over a thousand.
| Part or issue | Typical installed cost |
|---|---|
| Igniter or flame sensor | $100-$400 |
| Zone valve | $300-$650 |
| Circulator pump | $300-$1,100 |
| Expansion tank | $200-$800 |
| Gas valve | $200-$1,100 |
| Control board | $570-$1,040 |
The $90-$150 diagnostic call covers the technician actually pinpointing the fault — checking gas pressure, testing the ignition sequence, looking at the pressure and temperature readings, and inspecting the flue — rather than swapping parts on a guess. That fee is applied to the repair if you go ahead, so it's not an added cost on top of the final bill.
Haney is the original townsite at the heart of Maple Ridge, and a good share of the housing stock here dates from the 1920s through the 1970s, with additions and basement conversions layered on over the decades. Boilers in these houses often feed old cast-iron radiators through piping that's been reconfigured more than once, and that history shows up as extra zone valves, awkward pipe runs, and occasional air-lock issues that a newer, purpose-built system wouldn't have. Hillside lots in this part of Maple Ridge, sloping down toward the Fraser and Alouette rivers, also mean some mechanical rooms sit below grade in older basements that stay damp through the wet season, which is harder on control boards and electrical connections than a dry, elevated space.
For a boiler under roughly twelve to fifteen years old, repairing a specific failed part almost always makes sense — most individual components cost a fraction of a new install. Once you're looking at a cracked heat exchanger, or a unit that's had three or four separate repair calls in as many years, that's the point to have an honest conversation about replacement instead of continuing to patch an aging system.
Because a lot of Haney homes have had plumbing and heating modified since the original install, it helps to mention any known history — a past renovation, an added suite, a previous repair — when booking. That context often shortens the diagnostic process considerably.
Safety note
Combustion appliances are not a place to guess — if you smell gas or notice a yellow, flickering pilot flame, leave the house and call FortisBC at 1-800-663-9911 before touching anything.
Different parts fail differently — an igniter repair is inexpensive, while a control board or gas valve replacement costs considerably more, even on similar-aged boilers.
It's billed as $90-$150 but credited toward the repair if you proceed, so you're not paying for the diagnosis twice.
Often it's trapped air in the system rather than the boiler itself, which a technician can usually resolve by bleeding the radiators and checking the expansion tank.
Yes, prolonged humidity is harder on control boards and electrical connections over time, which is one reason older basement installs sometimes see more frequent minor repairs.
There's no fixed number, but once a boiler is well past fifteen years and needs its third or fourth repair, replacement usually becomes the more sensible option financially.
Rebate and financing programs through FortisBC and CleanBC exist and change over time, so confirm current eligibility rather than assuming a specific amount applies.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.