🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Carrier Furnace Installation in Vancouver

Carrier is already one of the most common furnace brands in Vancouver's basements. Here's what CANRO's licensed technicians cover on a new installation.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

Carrier is one of the furnace brands CANRO technicians encounter most often when we're out for service calls across Vancouver, which tells you it's been a common choice in this market for decades, including in a lot of the furnaces we're now replacing. Installing a new Carrier gas furnace follows the same process as any brand: an accurate heat-load calculation for the specific house, correct sizing against the existing or upgraded ductwork, proper sidewall or vertical venting depending on the model, and full commissioning before the job is signed off. CANRO sources and installs Carrier equipment as an independent contractor, not as a factory-authorized dealer.

Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

Why Carrier shows up so often in Vancouver furnace rooms

Walk into enough Vancouver basements and you'll notice a pattern: a large share of the furnaces we're called out to service or eventually replace carry the Carrier name, in Vancouver Specials from the 1970s and 80s, in postwar bungalows on the east side, and in newer builds alike. That's not a claim about market share or rankings — it's just what CANRO's technicians see day to day across the neighbourhoods we work in. It does mean our team has a lot of direct, hands-on familiarity with how these units age and what tends to fail on the older models, which is useful context when you're weighing a repair against a replacement.

None of that makes us a Carrier dealer in any official sense — we're an independent contractor who installs, services, and sources parts for Carrier furnaces the same way we do for the other major brands.

Getting the sizing right, not just matching the old one

When a Carrier furnace from the 1980s finally needs replacing, the easy shortcut is to install a new furnace with roughly the same output rating and call it done. We don't do that. A lot of furnaces from that era were oversized to begin with, sometimes deliberately, sometimes because sizing wasn't calculated as precisely as it is today. CANRO runs an actual heat-load calculation on the house — accounting for insulation, window area, ceiling height, and layout — and sizes the new furnace to that number, which in a lot of Vancouver homes ends up smaller than what's coming out, with better comfort and efficiency as a result.

This matters more in homes that have had insulation upgrades, new windows, or an addition since the original furnace went in — the house's actual heat load may have changed significantly, and sizing off the old furnace's rating would just repeat whatever inaccuracy was baked in decades ago.

Venting and ductwork on an older Vancouver home

A lot of these older Carrier furnaces vent up an original masonry chimney shared, in some houses, with a water heater. Moving to a high-efficiency condensing model means abandoning that chimney for the furnace and running new PVC venting out a sidewall instead, since condensing exhaust is too cool to draft properly through a traditional flue. That's a normal part of the job, but it does mean planning the vent termination location carefully — clearances from windows, doors, and the property line matter, especially on the narrower lots found across much of the city.

Ductwork from that era is sometimes undersized relative to what a modern furnace's blower wants to move, particularly if the house has had a basement suite added that increased demand on the system. Our technician checks duct sizing during the assessment and will tell you plainly if modifications are worth doing alongside the furnace swap rather than after the fact.

Installation day, step by step

  1. Gas, electrical, ductwork, and the old venting are disconnected and the existing furnace is removed.
  2. Any needed ductwork transition or modification is fitted before the new furnace goes in.
  3. The furnace is set, levelled, and connected to gas, electrical, and venting per the manufacturer's specifications.
  4. The gas connection is pressure-tested for leaks before first firing.
  5. A full commissioning cycle checks gas pressure, temperature rise, airflow, and every safety switch.
  6. The permit is filed with the applicable municipal authority and the job is signed off on completion.

What it costs

Residential furnace installation in Vancouver generally falls in the $4,500 to 9,500+ ballpark, depending on the equipment tier selected, whether the vent path needs to change, and any electrical or ductwork work required alongside the furnace itself. That's a ballpark based on the range of jobs we see, not a quote for your specific house — CANRO confirms exact pricing after seeing the mechanical room and existing systems in person.

Safety note

Furnace installation involves connecting and pressure-testing a gas line and commissioning the burner and venting system, which is licensed gas fitter work under Technical Safety BC. CANRO holds gas licence LGA0043870. If you smell gas at any point, leave the home and call FortisBC at 1-800-663-9911.

Frequently asked questions

Is CANRO a Carrier-authorized dealer?

No. CANRO is an independent licensed HVAC and gas contractor that installs and services Carrier furnaces along with other major brands, without any factory or authorized-dealer claim.

My old Carrier furnace is decades old — is it worth repairing or should I just replace it?

It depends on what's actually failed, parts availability for that model, and the furnace's overall condition. Our technician will give you a straight answer on both options rather than defaulting to a replacement recommendation.

Can I keep my old ductwork with a new furnace?

Often yes, though it's checked against the new furnace's airflow requirements first. If the existing ducts are undersized or in poor condition, we'll flag that as part of the assessment.

Do I need a permit for this?

Yes, a permit through the applicable municipal authority is a required part of any furnace installation, and CANRO handles that filing and any required inspection as part of the job.

How long does installation take?

A standard replacement is typically completed in a day. Jobs that involve rerouting venting or modifying ductwork can take longer depending on the scope of that additional work.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related furnace articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote