What a combi boiler costs installed in a Fraserview home, and why it's a natural fit for the neighbourhood's smaller, updated lots.
Tell us what you need—we’ll call you back fast.
Quick answer
A combi boiler installed in Fraserview typically runs $9,000 to $16,000, plus a City of Vancouver permit in the $75–$200 range. That's a ballpark based on 2026 public market data, not a quote — CANRO's certified gas technicians confirm the real figure once they've assessed your space heating and hot water demand.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A combi boiler handles both space heating and on-demand domestic hot water from a single unit, which means no separate storage tank taking up space in the mechanical room. That combined function is why combi units cost more upfront than a standard heating-only boiler, but it also explains their appeal on the smaller, more space-constrained lots common through Fraserview, particularly where a renovation or infill build is trying to free up square footage.
| Item | Typical Range |
|---|---|
| Combi boiler, installed | $9,000 – $16,000 |
| City of Vancouver gas/plumbing permit | $75 – $200 |
| Diagnostic visit on an existing boiler, if relevant | $90 – $150 (credited toward the job) |
Fraserview has seen a steady run of infill homes, laneway houses, and full-home renovations over the last decade, and combi boilers come up often in those projects because they free up the square footage a separate hot water tank would otherwise take — useful in a laneway home's compact mechanical closet, or in a basement suite conversion where every square foot matters.
For a household with high simultaneous hot water demand — several bathrooms, a laundry room running alongside a shower — it's worth discussing with your technician whether a combi unit is correctly sized for that demand, or whether a separate boiler and tankless or storage water heater setup might serve the home better. Combi units are excellent for space-constrained homes, but they're not automatically the right fit for every household size.
Vancouver's soft North Shore reservoir water is a mild advantage here — less scale accumulation inside the unit's heat exchanger over time compared with harder-water parts of the region, though periodic maintenance still matters for any combi system.
A combi boiler makes the most sense when space is genuinely tight and hot water demand is moderate. Larger households, or homes where hot water is needed in several places simultaneously, sometimes do better with a heating-only boiler paired with a dedicated tankless or storage water heater, since that setup can be sized more generously for hot water without over-sizing the space heating side. CANRO's technicians will walk through both configurations honestly rather than defaulting to whichever is simpler to quote.
A combi boiler installation in Fraserview needs a City of Vancouver gas and plumbing permit, which CANRO files and schedules inspection for as part of the job. Because combi installs often coincide with a larger renovation, it's worth coordinating the mechanical room and venting plans early with your technician so the boiler placement works with the rest of the project rather than being an afterthought.
Safety note
If you smell gas at any point, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 from outside. Combi boiler installation and gas connection work must be done by a Technical Safety BC licensed gas fitter — CANRO holds gas licence LGA0043870 and boiler licence LBP0046450.
It combines space heating and on-demand hot water in one unit, which adds cost over a heating-only boiler but removes the need for a separate water heater and its footprint.
Often, yes — the compact, all-in-one design suits the smaller mechanical spaces typical of laneway houses and infill builds.
It depends on the unit's output and your household's simultaneous demand. Your technician can size it correctly, or suggest a separate boiler and water heater if demand is high.
Yes, and CANRO handles the permit application and inspection booking as part of the installation.
Vancouver's relatively soft reservoir water means less scale buildup than in harder-water areas, which is a mild advantage, though regular maintenance is still recommended.
It's a good time to plan for one, since the mechanical room and venting layout can be designed around it from the start rather than retrofitted later.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.