🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Gas Furnace Installation in Riley Park

A new furnace installation in Riley Park has to work around a basement suite as often as not, which shapes both sizing and where the venting can go.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

New furnace installation in Riley Park starts with sizing the unit to the house, including any basement suite it will also heat, then pulling a City of Vancouver gas permit and planning venting that works with the home's layout. Character homes and post-war bungalows in the neighbourhood often have the furnace in a modest basement mechanical space that may need to accommodate a suite's separate ductwork or a shared system. CANRO's licensed gas fitters handle the sizing, permit, and installation, and confirm the ballpark cost after seeing the home.

Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

Sizing for a House That Might Have a Suite

A large share of Riley Park's character homes and bungalows include a basement suite, and that changes the sizing conversation. If one furnace will heat both the main house and the suite, it needs to be sized for the combined square footage and duct layout, not just the upstairs. If the suite has its own separate heating, the main furnace only needs to cover the primary living space, but the technician still needs to know which situation applies before recommending a unit. Getting this wrong in either direction, oversizing or undersizing, shows up later as short cycling or a furnace that never quite keeps up.

Permit and Venting Basics

  • A City of Vancouver gas permit is required for furnace installation, and the installing contractor pulls it as part of the job
  • High-efficiency furnaces vent horizontally through an exterior wall with PVC pipe, which needs proper clearance from windows, doors, and the property line
  • Older character homes sometimes have the furnace in a smaller basement space than a newer build, which can affect where venting can practically be routed
  • The completed installation is inspected under the permit before the job is considered finished

What Installation Day Looks Like

The old furnace is disconnected and removed, and the new one is set, levelled, and connected to gas, venting, ductwork, and the thermostat. If the home has a basement suite with its own zone or ductwork run, the technician confirms that connection is correct and that airflow to both areas is balanced before finishing up. Once everything is connected, the technician tests gas pressure, ignition, the safety controls, and airflow, and walks through basic operation before leaving.

For a straightforward like-for-like replacement with accessible mechanical space, installation is usually a one-day job. Homes needing new venting routes or ductwork adjustments, more common in some of the older character houses, can take longer.

Character Homes Near Main Street

Many of Riley Park's houses were built in the early decades of the twentieth century, and their basements were not originally designed as mechanical rooms the way a modern build's would be. Furnace closets can be tighter, and the venting path to an exterior wall isn't always a straight run. This isn't unusual for the area, and it's something a technician accounts for during the assessment rather than something to worry about ahead of time, but it's part of why an in-person look at the specific house matters more than a phone estimate.

Cost and What Affects It

As a ballpark, not a quote, furnace installation typically runs $4,500 to $9,500 or more, depending on furnace size, whether venting needs a new route, ductwork condition, and whether the unit is heating a basement suite as well as the main house. CANRO confirms the actual price after assessing the home rather than estimating sight unseen.

Safety note

Furnace installation involves gas line and venting work that must be done by a Technical Safety BC licensed gas fitter and inspected under the City of Vancouver permit. If you ever smell gas near a furnace or gas line, leave the home and call FortisBC's emergency line at 1-800-663-9911 from outside.

Frequently asked questions

Does a basement suite change what size furnace I need?

Yes, if the same furnace will heat both the main house and the suite, sizing needs to account for the combined area and duct layout. If the suite has separate heating, only the main living space matters for sizing the furnace.

Do I need a permit to install a new furnace in Vancouver?

Yes. The City of Vancouver requires a gas permit for furnace installation, and the installing contractor pulls it and coordinates the inspection as part of the job.

How long does furnace installation take in a Riley Park character home?

A straightforward swap with accessible mechanical space is usually a one-day job. Homes needing new venting routes or ductwork changes, more common in older character houses, can take longer.

How much does furnace installation cost?

As a ballpark, not a quote, installation typically runs $4,500 to $9,500 or more, depending on sizing, venting, and ductwork. CANRO confirms the actual price after seeing the home.

Can the new furnace use my existing ductwork?

Often, but it needs to be checked rather than assumed, especially in older homes where ductwork may have been added or modified over the years, sometimes to serve a basement suite.

Where does the venting go on a high-efficiency furnace?

Horizontally through an exterior wall with PVC pipe, rather than up a traditional chimney, with required clearances from windows, doors, and the property line that the technician plans around during the assessment.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related furnace articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote