🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Furnace leaking water in Arbutus Ridge

Water near a gas furnace almost always traces to condensation or condensate drainage rather than the furnace itself springing a leak.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

A gas furnace doesn't carry water through it the way a boiler does, so a puddle nearby is almost always condensate drainage from a high-efficiency furnace, condensation from nearby ductwork or pipes, or water tracking in from somewhere else entirely, like a sump or a nearby water heater. Where the water is coming from matters more than how much of it there is.

Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

The Most Common Source: Condensate Drainage

High-efficiency gas furnaces extract enough heat from the exhaust that the moisture in it condenses into liquid water, which is designed to drain away through a small plastic line and often a condensate pump. When that line clogs, kinks, or the pump fails, water backs up and either overflows a safety pan or leaks out around a fitting — which is the single most common reason we get called about water near a furnace in this neighbourhood.

Other Possible Sources

  • A nearby water heater leaking and the water traveling across the floor to pool near the furnace
  • Condensation forming on cold ductwork or pipes passing near or over the furnace, especially in a damp crawlspace
  • Groundwater or seepage in a crawlspace during heavy Vancouver rain, unrelated to the furnace itself
  • A clogged or disconnected condensate pump that's no longer moving water where it should
  • On rare occasions, a cracked heat exchanger allowing condensation to collect internally and drip out — worth having ruled out by a technician

What You Can Safely Check

  1. Look for the small plastic condensate line near the furnace and see whether it's disconnected, kinked, or visibly dripping at a fitting
  2. Check if there's a condensate pump nearby and whether it's running or silent
  3. Confirm whether the water is actually coming from the furnace area or from a water heater or other source nearby
  4. Note whether the leak coincides with the furnace running, which points toward condensate rather than an unrelated source

Why This Comes Up Often in Crawlspace Installations

A lot of Arbutus Ridge homes have their furnace in a crawlspace, which is exactly the kind of space where a condensate line is more likely to sag, kink, or sit at a shallow slope than it would in a properly framed mechanical room. Combined with general coastal dampness, it can be genuinely hard to tell condensate water apart from ordinary crawlspace moisture just by looking — which is part of why tracing the actual source matters more than assuming.

When to Call Right Away

If water is actively pooling and you're not sure of the source, or if it's anywhere near electrical components at the furnace, it's worth shutting the furnace off at the switch and calling rather than waiting to see if it stops on its own. A blocked condensate line can also trigger a safety switch that shuts the furnace down entirely, which is the furnace protecting itself — not something to bypass.

Cost to Fix It

Clearing a clogged condensate line is generally a straightforward, lower-cost repair, while a failed condensate pump or, in rare cases, heat exchanger damage involves more. The CANRO office can walk through what you're seeing and give you a sense of what's likely, with the exact price confirmed once the technician traces the actual source.

Preventing a Repeat

Checking and clearing the condensate line is part of a standard annual tune-up, which is particularly worthwhile for a crawlspace furnace given how easily that line can sag or clog in a damp, low-clearance space over a heating season.

Safety note

If water is pooling near electrical connections at the furnace, or if you notice any gas smell alongside the leak, shut the furnace off at its switch, leave the area, and call FortisBC at 1-800-663-9911 if gas is involved. Furnace repairs should be carried out by a Technical Safety BC licensed technician.

Frequently asked questions

Is it normal for a gas furnace to produce water at all?

Only for high-efficiency condensing furnaces, which are designed to drain that water away through a condensate line. A standard, older furnace shouldn't produce water, so a leak on one of those points to a different source.

Can I just clear the condensate line myself?

If it's a simple external kink or disconnection you can see, you may be able to reconnect it, but anything involving the pump, trap, or internal furnace components should go to a technician.

Will a clogged condensate line damage my furnace?

Most furnaces have a safety switch that shuts the unit down before serious damage happens, but leaving a clog unresolved means no heat until it's cleared, plus a slow drip risk to whatever's underneath.

How do I know if it's the furnace or my water heater leaking?

Trace where the water trail leads and check whether it correlates with the furnace running versus being constant regardless of the furnace's status. A technician can confirm the source if it's not obvious.

Is a leaking furnace an emergency?

Not usually in the urgent safety sense, unless water is near electrical components, but it's worth addressing promptly to avoid water damage to flooring or nearby materials.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related furnace articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote