Annual IBC boiler service for New Westminster homes, with extra attention to the older radiator piping common in the city's character properties.
Tell us what you need—we’ll call you back fast.
Quick answer
An annual IBC boiler service checks combustion, tests the safety controls, inspects venting, and cleans components that pick up soot or scale over a heating season. In New Westminster, service should also include a look at the radiator piping and zone valves in older character homes, since those parts of the system age separately from the boiler itself. Booking before the fall heating season starts helps avoid a mid-winter breakdown and gives time to order parts if something needs attention.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
New Westminster earned its reputation as one of the older cities in the region honestly, and that shows up directly in the age range of boilers and heating systems we see on service calls here. It's not unusual to service a boiler installed within the last decade sitting in a mechanical room that's part of a house built well over a hundred years ago, and that gap between the equipment's age and the building's age is exactly why a generic service checklist isn't quite enough on its own.
New Westminster's older neighbourhoods, Queen's Park especially, are full of homes where a gas boiler feeds a radiator system that's decades older than the boiler itself. Annual service in these homes isn't just about the boiler; it's an opportunity to check the piping, zone valves and radiators that the boiler depends on, since a boiler running perfectly can still leave rooms cold if something downstream has quietly failed.
Newer condos and townhomes converted from older buildings in the city sometimes have simplified, more modern hydronic systems, and service there looks more like a standard boiler check without the extra radiator piping considerations of a heritage single-family home. Knowing which category your home falls into before the visit even starts helps us bring the right expectations and, where useful, the right extra time budgeted for a closer look.
| Task | Purpose |
|---|---|
| Combustion analysis | Confirms clean, efficient burner operation |
| Flue and venting inspection | Checks for blockages, corrosion or termination problems |
| Condensate trap and line check | Prevents shutdowns from a blocked or frozen line |
| System pressure and expansion tank check | Prevents short-cycling from low pressure or a waterlogged tank |
| Circulator pump inspection | Catches early wear before a failure leaves rooms cold |
| Safety control testing | Confirms pressure relief valve, low water cutoff and high-limit control work correctly |
For heritage homes we add a check of accessible radiator valves and bleed points, since trapped air in an older system is one of the most common reasons a boiler that services perfectly still leaves a room or two underheated through winter. We also make a point of noting the condition of any exposed piping we can see, since visible corrosion or a slow weep at an old fitting is far cheaper to address on our schedule than on an emergency call in January.
None of these checks require special tools, just a bit of familiarity with what's normal for your own system, which is something worth asking your tech about directly at the end of a service visit rather than guessing.
Late summer to early fall is the best window, ahead of the first real cold snap that sends every boiler in the region into daily use. It also gives time to source a part if the service turns up something that needs replacing, rather than discovering an issue on the coldest night of the year.
For heritage homes we sometimes recommend pairing the annual boiler service with a broader look at the radiator system every few years, since piping that's original to a century-old home benefits from more than a once-a-year glance.
Every service visit we do generates a simple record: pressure readings, combustion numbers, condition notes on the venting and condensate handling, and anything that was cleaned, adjusted or flagged for future attention. On their own, none of these numbers mean much from a single visit. Looked at across three or four years, though, they start to tell you something real about how your specific boiler is aging, whether efficiency is holding steady or slowly declining, whether a component is trending toward failure before it actually fails.
This matters more in a heritage New Westminster home than in a newer build, simply because the radiator system the boiler feeds has its own independent history that isn't captured anywhere else. If a previous owner had renovation work done on the piping fifteen years ago and nobody kept records, our service notes become the closest thing to a maintenance history the house actually has.
If you're planning to sell in the next few years, that documentation is also useful to have on hand, since buyers and their inspectors in this city are used to asking about the condition of older mechanical systems, and a clear service record answers a lot of those questions before they're even asked.
Safety note
Boiler service work involving combustion testing, gas piping or venting must be carried out by a Technical Safety BC licensed gas fitter. CANRO holds gas licence LGA0043870 and boiler licence LBP0046450. If you smell gas or suspect carbon monoxide, leave the home immediately and call FortisBC at 1-800-663-9911 from a safe location.
For heritage homes we include a check of accessible radiator valves and bleed points as part of the visit, since trapped air or a stuck valve downstream of the boiler is a common cause of uneven heating.
Once a year is standard, ideally in late summer or early fall. Some heritage homes benefit from a slightly closer look at the radiator piping every few years on top of the annual boiler service.
It might, if the cause is trapped air or a partially closed valve that gets caught during the visit. If the room has been consistently underheated for structural reasons, that's more of a zoning or sizing conversation.
Yes, a converted condo or townhome with a more modern hydronic system usually just needs a standard boiler service, while a heritage single-family home benefits from the extra radiator piping check.
Late summer through early fall, before the first cold snap. This also leaves time to order parts if the service finds something that needs replacing.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.