🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Heat Pump Installation · Metro Vancouver

Can a heat pump replace my furnace?

Yes — in Metro Vancouver a properly sized cold-climate heat pump can fully replace a gas furnace, providing all your heating plus air conditioning from one electric system. Many homeowners switch entirely (and earn the biggest rebates by doing so); others keep the furnace as backup in a dual-fuel setup for cold snaps and peace of mind.
★ 4.9/5 · 85+ reviews✅ Licensed & TSBC gas-fitting🎉 Since 1999💰 Rebates handled

Get your free quote

Tell us about your installation—we’ll call you back fast.

No obligation · We never share your info

Full replacement vs dual-fuel

  • Full electric replacement: remove the furnace, heat and cool with the heat pump; maximum rebates and zero on-site emissions.
  • Dual-fuel (hybrid): heat pump does most of the work; the gas furnace kicks in only on the coldest days.
  • Heat pump + electric backup: a common all-electric setup with strip heat for rare extreme cold.

Which is right for you?

It depends on your home’s heat loss, your comfort preferences and your rebate goals. Switching fully off gas unlocks the largest rebates, while dual-fuel offers a safety margin. We’ll model both. See heat pump installation or compare to a furnace.

BC Permits, Gas Line Decommissioning, and What the Code Requires

Replacing a furnace with a heat pump in Metro Vancouver involves more paperwork than most homeowners expect, and skipping steps can void your CleanBC rebate or fail a home inspection. Any time you remove or abandon a gas appliance, a Technical Safety BC-licensed gas contractor must decommission the gas line, cap it at the meter or at a point approved by FortisBC, and pull the required gas permit. CANRO holds gas licence LGA0043870 and handles this as part of the full replacement scope so you are not coordinating separate trades.

The electrical side requires its own permit as well. Cold-climate heat pumps typically need a dedicated 240 V circuit rated at 30 to 60 amps depending on the unit. In older Metro Vancouver homes and condos, the existing panel may need an upgrade before installation can proceed. BC Hydro rebates are available for panel upgrades done in conjunction with a heat pump install, which helps offset that cost. Your permit applications are filed with the local municipality, and an inspection is booked before the system is commissioned.

  • Gas permit: required any time an existing gas furnace is removed or the gas line is capped.
  • Electrical permit: required for the new dedicated circuit serving the heat pump.
  • Mechanical permit: may be required by your municipality for changes to the ducted system.
  • Technical Safety BC gas licence LGA0043870: confirms CANRO is authorized to decommission your gas appliance legally.
  • CleanBC rebate documentation requires permit numbers, so permits must be pulled before the rebate application is submitted.

Rebates and Financing Available in Metro Vancouver Right Now

Switching from a gas furnace to a cold-climate heat pump is one of the most heavily incentivized upgrades available to BC homeowners. The CleanBC Better Homes program offers up to $6,000 for a qualifying cold-climate heat pump, and FortisBC adds a natural gas customer rebate of up to $1,000 when you retire a gas heating system. The federal Canada Greener Homes Grant (where still active) and the Canada Greener Homes Loan program at 0% interest over 10 years can further reduce your out-of-pocket cost. Stack these correctly and a full heat pump installation that might list at $14,000 to $18,000 can come down significantly. See our rebates page for current program amounts and eligibility rules, which change each season.

For homeowners who do not qualify for grant programs or want to spread the remaining cost, CANRO can connect you with third-party financing options suited to home-improvement projects. Most programs require the contractor to be registered with the rebate body before work begins, which CANRO is. This also means the rebate paperwork is handled on your behalf rather than leaving you to navigate the portals alone. Ask about current program availability when you book your contact consultation, because funding pools open and close throughout the year.

How CANRO handles your heat pump installation

Every CANRO installation follows the same honest, code-driven process so there are no surprises: a free in-home assessment and correct sizing, a written upfront price, clean professional installation by our licensed technicians, full commissioning, and a passed inspection—with the permit and any rebate paperwork handled for you. We’ve served Metro Vancouver since 1999 and are rated 4.9 stars across 85+ Google reviews. Explore heat pump installation.

Rebates & financing

High-efficiency and electrification upgrades can qualify for CleanBC, BC Hydro, FortisBC and federal Greener Homes rebates—sometimes several thousand dollars. CANRO is a registered contractor and we handle the paperwork. See our rebates & financing page, and ask about interest-free options on qualifying upgrades.

Keep reading

Related installation questions

Good to know

More frequently asked questions

Will a heat pump keep me as warm as a furnace?
Yes, when correctly sized for our climate. Cold-climate heat pumps deliver steady, comfortable heat across Metro Vancouver winters.
Should I keep my furnace as backup?
It’s optional. Dual-fuel keeps the furnace for cold snaps; full replacement removes it for maximum rebates. We’ll advise based on your home.
Do I get bigger rebates if I remove the furnace?
Generally yes — switching fully off fossil-fuel heat qualifies for the largest CleanBC and federal rebates.
Does a heat pump cool too?
Yes — replacing your furnace with a heat pump adds whole-home air conditioning at no extra equipment.
Will a heat pump keep my Metro Vancouver home warm on the coldest winter nights, when temperatures drop below freezing?
Modern cold-climate heat pumps are rated to deliver full heating capacity down to around -15 C to -25 C, well below anything Metro Vancouver normally sees. The Lower Mainland rarely drops below -10 C even in a hard Fraser Valley freeze, so a properly sized unit handles our climate without a backup heat source in most situations. In a hybrid setup the gas furnace only fires on the handful of nights each winter when outdoor temperatures make the heat pump less efficient than burning gas, keeping your operating costs low year-round. Our heat pump services team sizes every system to your home's heat-loss calculation, not a rule of thumb.
What happens to my existing ductwork when a heat pump replaces the furnace — does it all need to be replaced?
In most Metro Vancouver homes the existing ductwork can be reused, but it must be assessed before installation. Heat pumps move a larger volume of air at lower temperatures than a gas furnace, so undersized ducts or leaky flex runs can reduce efficiency and cause comfort complaints. CANRO does a duct evaluation as part of every heat pump quote. Minor sealing and balancing is usually enough. Significant duct replacement is less common but does occur in older homes with undersized trunk lines. If your home is not ducted at all, a multi-zone mini-split system is the ductless alternative worth discussing.

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote