KeepRite furnace installs in Vancouver often mean working around narrow rowhouse mechanical rooms and tight side-yard venting runs.
Tell us what you need—we’ll call you back fast.
Quick answer
A KeepRite gas furnace installation in Vancouver generally falls within the $4,500 to $9,500+ ballpark, not a quote, with CANRO's office confirming an exact price after reviewing your specific home — venting path, ductwork condition and access are the main variables. Because KeepRite is a common choice for rental suites and value-focused replacements, cost control without cutting corners on the installation itself is often the priority homeowners raise first. Most installs finish in one working day when the venting route doesn't need major changes.
Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A cracked or corroded heat exchanger ends the conversation outright — that component isn't repaired, on any brand, it's replaced. Short of that, the signals CANRO weighs are a furnace needing repeated unrelated repairs, rooms that stay uneven no matter what's adjusted, and a unit old enough that sourcing specific parts is starting to take longer than it should. For a rental property specifically, there's also a practical trigger: a landlord facing a second or third repair call in a year often decides replacement is the more predictable cost.
A good share of Vancouver's rowhouses and older narrow-lot homes have mechanical rooms that were never generous to begin with, and venting sometimes has to route through a tight side yard between two closely built properties. That routing affects both the labour involved and, occasionally, the clearances required by code — a vent terminal too close to a window, door, or property line needs to be relocated or re-routed, which is exactly the kind of detail a phone estimate can't responsibly account for. CANRO walks the actual venting path during the assessment rather than assuming the existing route will work for the new furnace without checking.
For a rental suite specifically, we also confirm the tenant has heat again before considering the job finished, not just that the furnace technically runs.
$4,500 to $9,500+ is the ballpark, not a quote — CANRO's office confirms actual pricing after reviewing your specific job. A straightforward swap with existing venting reused sits toward the lower end; venting relocation, ductwork repair, gas line changes, or cramped access push it higher. We explain which factors apply to your home before the work starts, not after.
Vancouver requires a permit for gas furnace installation, issued through the city's own building bylaw rather than the provincial code most neighbouring municipalities default to. CANRO submits that application as part of the job. The gas connection itself, regardless of municipality, is completed by a Technical Safety BC licensed gas fitter, and the installation is commissioned and tested before it's signed off.
Two Vancouver rowhouses on the same block can still need noticeably different installation scopes for what's technically the same new furnace. One might have a mechanical room with a venting path that already meets current clearances, while the one next door needs the terminal moved a few feet to clear a window or property line that wasn't a factor when the original furnace went in decades earlier. That's why CANRO walks the actual venting route and mechanical room before confirming a number, rather than pricing purely off square footage or a description given over the phone. It protects both sides of the job: the homeowner isn't quoted a number that turns out to be unrealistic once the crew arrives, and the installation itself isn't rushed to fit a price that didn't account for the real conditions.
Safety note
Gas connections, venting, and final commissioning on a new furnace must be completed by a Technical Safety BC licensed gas fitter — CANRO holds gas licence LGA0043870. If you ever smell gas around a newly installed unit, leave the home immediately and call FortisBC's emergency line, 1-800-663-9911, from outside.
It's a common choice where cost control matters without sacrificing a proper installation, and CANRO installs it to the same standard as any other brand.
Often, but not always — a change in furnace exhaust category, or a route that never met current clearances, can require relocating the vent terminal. That's checked during the assessment.
Most jobs finish within a single working day if venting can be reused as-is. A vent relocation or ductwork repair extends that.
Not necessarily, but access to the suite or mechanical room needs to be arranged in advance, and the technician confirms heat is restored before finishing.
The furnace, standard installation labour, and full commissioning. Venting relocation, ductwork work, and difficult access are priced based on what your specific home requires.
Yes, CANRO submits the City of Vancouver permit application as part of the installation rather than leaving it to the homeowner.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.