Smart Thermostats · Controls
Lennox iComfort in Metro Vancouver
Lennox’s proprietary smart thermostat line, built to pair fully with Lennox furnaces, heat pumps, and air handlers.
By the CANRO Heating & Cooling technical team · Licensed HVAC & gas-fitting contractor, Metro Vancouver · Last updated July 2026
About Lennox iComfort
The Lennox iComfort line (iComfort E30, S30, and the simpler M30) is designed to communicate directly with Lennox's own variable-capacity equipment — on a matched Lennox system, iComfort can unlock finer staging and diagnostics than a universal thermostat can. For Metro Vancouver homeowners running a Lennox furnace or heat pump, iComfort is usually the thermostat that gets the most out of the equipment.
TSBC-Licensed Gas FittersRed Seal HVACWorkSafeBC InsuredPermitted & Inspected InstallsServing Metro Vancouver Since 1999We File Your Rebates
Lennox iComfort models CANRO installs
iComfort E30
Lennox’s flagship communicating touchscreen thermostat
| Type | Full-colour touchscreen, Lennox-communicating |
|---|---|
| Compatibility | Best paired with Lennox variable-capacity furnaces/heat pumps for full staging control; works with most other 24V systems in basic mode |
| Features | Home comfort scheduling, humidity control tie-in, filter/maintenance reminders, app control |
| Best for | Homeowners with a matched Lennox system who want the full feature set |
| Typical install cost | $250–$450 installed |
iComfort S30 / M30
Mid-tier and entry Lennox smart thermostats
| Type | Smart thermostat, Lennox-communicating on compatible equipment |
|---|---|
| Compatibility | Works across the Lennox lineup; M30 is the simpler, lower-cost option |
| Best for | A Lennox-native thermostat without the full E30 feature set |
| Typical install cost | $180–$350 installed |
CANRO’s Lennox iComfort experience
CANRO installs and configures Lennox iComfort thermostats as part of new Lennox installs and as standalone upgrades on existing Lennox systems. We confirm your specific Lennox equipment supports full iComfort communication (older single-stage units may only get basic on/off control), wire it correctly, and set up zoning or scheduling if your home uses it.
Credentials: TSBC-licensed gas fitters · Red Seal HVAC · WorkSafeBC insured · permitted & inspected installs · manufacturer-trained · serving Metro Vancouver since 1999. Read our reviews →
Related pages
Lennox iComfort FAQs
Do I need iComfort if I have a Lennox furnace?+
No — any compatible 24V thermostat will run a Lennox furnace in basic mode. iComfort adds value specifically on Lennox’s variable-capacity equipment, where it can access finer staging and diagnostic data a universal thermostat can’t.
Can iComfort control a non-Lennox system?+
It can work as a standard thermostat on other brands in many cases, but you lose the Lennox-specific communicating features. CANRO confirms compatibility before installing.
Does iComfort qualify for a rebate?+
Qualifying smart thermostats are often eligible for a FortisBC rebate — CANRO confirms the current amount and eligibility before installing.
Can CANRO install iComfort on a Lennox system another company installed?+
Yes, we confirm compatibility with your specific model and install it correctly regardless of who installed the original equipment.
Thinking about Lennox iComfort?
Whether it’s a new install alongside a system upgrade, or a standalone thermostat swap, CANRO covers all of Metro Vancouver. Call for honest advice on the right thermostat for your equipment.
4.9★85+ Google reviews
27+Years serving Metro Vancouver
20+Brands serviced
$0Free written estimates on installs
Frequently asked questions
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are CANRO technicians licensed and insured?
Yes. CANRO holds Technical Safety BC contractor licences for gas (LGA0043870) and boilers (LBP0046450), our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 359-1081, email info@canroheat.ca, or use the booking form on canroheat.ca. Most calls are answered the same business day and we offer next-day appointments for non-emergency work.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
Yes. We are a registered contractor for BC Hydro, FortisBC and federal Greener Homes rebates. A high-efficiency heat pump installation can qualify for significant combined rebates depending on your home, equipment and income, and we handle the paperwork for you.
How quickly can you replace a broken hot water tank?
Standard 40 or 50-gallon gas or electric tanks are typically replaced same-day or next-day from stock. Tankless water heaters and larger-capacity units usually take 1–3 business days depending on parts availability.
Why should I choose CANRO over other HVAC companies?
CANRO has been operating in Metro Vancouver since 1999 with a 4.9-star rating from 85+ Google reviews. We specialise in difficult boiler systems (Viessmann, IBC, Baxi, Laars) that many companies do not service, we give honest options instead of upselling, and our work is performed by long-term staff — not subcontractors.
What Metro Vancouver homeowners say about CANRO
Verified Google reviews — 4.9 average across 85+ ratings
★★★★★
"Joe and Allan is a great team of plumbers. They gave me the right advice and helped me make a good decision with my heating."
Google review · May 2026
★★★★★
"The technical team is extremely efficient and skilled. They installed the water tank in two hours and the RUUD tank is working perfectly well."
Google review · May 2026
★★★★★
"We are so happy with the service provided by Joe and Alan. Alan was recommended to us to replace our hot water tank."
Google review · Feb 2026
★★★★★
"Highly recommend."
Google review · Jan 2026
★★★★★
"Canro boiler services were genuine life savers. I was stuck without heat overnight and they came by and got my boiler running."
Google review · Jan 2026
★★★★★
"Canro came in and fixed my boiler that was throwing all types of codes that I couldn't understand but the technician explained everything."
Google review · Jan 2026