How CANRO diagnoses and repairs a Noritz EZTR condensing tankless unit for White Rock's mix of beach-level and bluff-top homes.
Tell us what you need—we’ll call you back fast.
Quick answer
White Rock EZTR repair calls generally come down to ignition, flow-sensor, or venting faults, with the exact mix depending a bit on whether the home sits down near the waterfront or up on the bluff. A technician can usually confirm the cause and fix straightforward faults in a single visit.
Need a licensed gas fitter for your tankless water heater? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
White Rock is a small coastal city on a bluff above Semiahmoo Bay, and the terrain genuinely splits into two different environments. Down near the beach promenade you've got older bungalows and low-rise buildings from decades past, sitting closer to salt air and coastal moisture. Up on the bluff, homes tend to be newer and set back further from the water, which changes the exposure a tankless unit's venting deals with day to day.
That split matters for a repair call because the failure patterns aren't identical — beach-level properties see a bit more corrosion-related wear on exposed fittings over time, while bluff-top homes are more likely to have straightforward mechanical or electronic faults typical of any inland install.
Ignition faults are the most common issue we diagnose here, the same as most places the EZTR series is installed — the burner attempts to fire and either fails to catch or drops out and locks the unit down. Flow-sensor faults are the next most common. On beach-level properties specifically, we keep a closer eye on the condition of any exposed metal near the vent termination, since ongoing coastal exposure can accelerate wear there.
On a bluff-top home with a straightforward single-component fault, repair is almost always the right call regardless of the unit's age, provided the heat exchanger itself is sound. On a beach-level property where a technician finds meaningful corrosion alongside the fault that brought them out, that's when the replacement conversation starts, since environmental wear on those units can outpace what the calendar age alone would suggest.
A technician starts by asking what you've noticed, then checks gas supply and pressure, the venting run, the flow sensor and ignition components, and any fault history on display. On beach-level properties, the outdoor vent termination and condensate discharge point get a closer look than they would further up the bluff, simply because that's where coastal exposure does its work.
We follow the manufacturer's documented service procedures as a licensed BC gas contractor; we don't claim Noritz-authorized status because that's not something CANRO holds.
Because White Rock is a compact city, most calls here don't involve long travel time between stops, which helps with scheduling flexibility on the day of the visit, though we still won't promise a fixed arrival window before we've confirmed the day's route.
Based on current public-market pricing for the region, a typical tankless repair bill runs about $250 to $900 depending on the part and labour, and the diagnostic or service-call fee, usually $90 to $150, is generally credited toward the repair if you proceed. That's a ballpark drawn from 2026 market data, not a quote — CANRO's certified technicians confirm the actual number after assessing the unit.
Safety note
If you smell gas, notice corrosion or staining near a gas fitting, or hear the unit make an unusual sound while trying to fire, leave the house and call FortisBC's line at 1-800-663-9911 right away. Gas appliance repair in BC must be carried out by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870.
It can influence what we check first — beach-level properties see more coastal wear on exposed fittings, while bluff-top homes tend to have more typical inland fault patterns.
Visible rust, staining, or pitting near the vent termination or exposed fittings are the usual signs, though a technician needs to inspect it directly to judge severity.
White Rock is its own municipality but draws from the same regional Metro Vancouver water supply as most of the surrounding area, which is comparatively soft.
If the repair modifies gas piping or venting, yes — CANRO applies for that through the City of White Rock as part of the job.
That's worth flagging right away, since a recurring fault sometimes points to an underlying cause that a single repair didn't fully address.
We schedule around the situation and current bookings and won't promise a fixed turnaround, though safety-related issues are always prioritized.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.