By the CANRO Heating & Cooling technical team · Licensed HVAC & gas-fitting contractor, Metro Vancouver · Last updated July 2026
About the Rheem Prestige Series
Rheem’s premium-tier variable-speed heat pump and furnace line
TSBC-Licensed Gas FittersRed Seal HVACWorkSafeBC InsuredPermitted & Inspected InstallsServing Metro Vancouver Since 1999We File Your Rebates Rheem Prestige Series specifications
General specifications for the Rheem Prestige Series heat pump. Figures are manufacturer-published ranges/typicals — always confirm the exact rating for your specific unit from its nameplate or Rheem’s current spec sheet before purchase.
| Efficiency | High SEER2/HSPF2 tier, variable-speed operation |
|---|
| Best for | Homeowners wanting Rheem’s most efficient, quietest residential system |
|---|
Is the Rheem Prestige Series right for your home?
CANRO sizes every heat pump install with a proper room-by-room load calculation, not a rule-of-thumb square-footage guess. We’ll tell you honestly whether a Prestige Series is the right fit for your home’s ductwork, insulation, and budget — or recommend a better-matched Rheem model if it isn’t.
CANRO’s Rheem Prestige Series installation & service
CANRO installs, services, and repairs Rheem heat pump equipment across Metro Vancouver, including the Prestige Series. Every install includes a proper load calculation, correct electrical/gas/venting work by TSBC-licensed, Red Seal technicians, permits pulled and inspected where required, and a full commissioning check before we leave. We also service Prestige Series units installed by other contractors.
Rheem Prestige Series FAQs from Metro Vancouver homeowners
Is the Rheem Prestige Series a good choice for a Metro Vancouver home?+
The Prestige Series is one of Rheem’s higher-tier heat pump models, and CANRO installs and services it across Metro Vancouver. Whether it’s the right fit for your home depends on your existing ductwork, budget, and efficiency goals — we size and quote based on a proper load calculation, not a generic recommendation.
What does a Rheem Prestige Series typically cost installed?+
Installed cost depends on your home’s ductwork, electrical/gas-line condition, and any removal of an old system. As a general guide: furnace replacements typically run $4,500–$9,500+, heat pumps $6,000–$18,000+, and central A/C $3,500–$7,500+ before rebates. CANRO gives a free, written, home-specific quote.
Does the Rheem Prestige Series qualify for a rebate?+
Qualifying high-efficiency furnaces, heat pumps, and cold-climate systems are often eligible for CleanBC, BC Hydro, and/or FortisBC rebates — amounts and eligibility change, so CANRO confirms your specific model before quoting and files the paperwork.
Can CANRO service a Rheem Prestige Series another company installed?+
Yes — we install, service, and repair Rheem equipment across Metro Vancouver regardless of who installed it, including systems that were never commissioned or sized correctly.
Thinking about a Rheem Prestige Series?
Whether it’s a new Rheem Prestige Series install, an annual service, or a repair, CANRO covers all of Metro Vancouver. Call for an honest recommendation and a free written quote.
Frequently asked questions
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are CANRO technicians licensed and insured?
Yes. CANRO holds Technical Safety BC contractor licences for gas (LGA0043870) and boilers (LBP0046450), our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 359-1081, email info@canroheat.ca, or use the booking form on canroheat.ca. Most calls are answered the same business day and we offer next-day appointments for non-emergency work.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
Yes. We are a registered contractor for BC Hydro, FortisBC and federal Greener Homes rebates. A high-efficiency heat pump installation can qualify for significant combined rebates depending on your home, equipment and income, and we handle the paperwork for you.
How quickly can you replace a broken hot water tank?
Standard 40 or 50-gallon gas or electric tanks are typically replaced same-day or next-day from stock. Tankless water heaters and larger-capacity units usually take 1–3 business days depending on parts availability.
Why should I choose CANRO over other HVAC companies?
CANRO has been operating in Metro Vancouver since 1999 with a 4.9-star rating from 85+ Google reviews. We specialise in difficult boiler systems (Viessmann, IBC, Baxi, Laars) that many companies do not service, we give honest options instead of upselling, and our work is performed by long-term staff — not subcontractors.