🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Takagi T-H3 vs Takagi T-KJr2: Which Fits Your Home

The T-H3 is a full-size condensing unit; the T-KJr2 is a compact non-condensing model built for tight mechanical spaces and lighter hot-water demand.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

The Takagi T-H3 is a condensing tankless water heater sized for whole-home duty, while the T-KJr2 is a compact non-condensing unit built to fit into tighter mechanical spaces where demand is lighter. The T-H3's extra internal heat exchanger means plastic venting and a condensate drain; the T-KJr2's simpler non-condensing design vents with stainless steel and needs no condensate line at all, which sometimes makes it the more practical retrofit in a cramped utility closet. The right choice comes down to how much simultaneous hot water your household actually needs and how much room the mechanical space gives you to work with.

Need a licensed gas fitter for your tankless water heater? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

Full-Size Condensing vs Compact Non-Condensing

The T-H3 and the T-KJr2 sit at different points in Takagi's tankless lineup, and the gap between them is bigger than just physical size. The T-H3 is a condensing unit — it uses a second heat exchanger to reclaim heat from the exhaust before venting outside, and that design is built for homes running multiple fixtures at once. The T-KJr2 is a compact non-condensing unit, built with a smaller footprint in mind for homes or additions where floor space or wall space in the mechanical room is genuinely tight.

We see the T-KJr2 come up most often in laneway homes, garden suites, and older houses where the original mechanical closet was never designed around a full-size appliance. The T-H3 shows up more in main-house installs where the household is running a shower, a dishwasher, and laundry on the same morning.

Venting and Condensate: The Practical Split

Because the T-H3 condenses, it typically vents with PVC or CPVC pipe and needs a condensate drain routed to a floor drain, laundry standpipe, or small pump. The T-KJr2, being non-condensing, vents with stainless steel rated for its higher exhaust temperature and skips the condensate question entirely — there's no acidic liquid to route anywhere. In a small suite where there's no floor drain within reach, that alone can settle the decision in the T-KJr2's favour.

The trade-off is that stainless steel venting has its own length and clearance rules, and in a compact space those clearances to combustibles, windows, and soffit vents still have to be checked against the manufacturer's venting tables and the BC Building Code before anything gets installed.

Sizing for the Household, Not for the Brand Name

  • A compact non-condensing unit like the T-KJr2 is generally aimed at lighter, single-point or limited-fixture demand.
  • A full-size condensing unit like the T-H3 is built around simultaneous multi-fixture demand in a main house.
  • Physical space in the mechanical room can rule one option out before demand even enters the conversation.
  • We size off your actual fixture count and how many run at once, never off a spec sheet number alone, since real household habits vary house to house.

Side-by-Side

FeatureT-H3 (condensing)T-KJr2 (compact non-condensing)
Combustion typeCondensingNon-condensing
Venting materialPlastic (PVC/CPVC)Stainless steel
Condensate drainRequiredNot required
Typical placementMain-house mechanical roomSuites, laneway homes, tight closets

Where This Comes Up in Laneway and Suite Retrofits Around Metro Vancouver

A good share of the smaller-unit calls we get are tied to laneway houses and basement suites built to add hot-water demand onto a lot that already had one water heater serving the main house. Squeezing a full condensing unit and its condensate line into a laneway home's tiny mechanical closet is sometimes possible, but a compact non-condensing unit avoids the drain question altogether and can be easier to mount in a shallow closet or over a stacked washer-dryer.

On the main house side, we more often steer toward the condensing T-H3 platform because a family running two bathrooms and a kitchen at the same time benefits from the steadier output a full-size condensing unit is designed to hold under that kind of simultaneous draw.

How CANRO Sorts This Out On Site

We measure the mechanical space, count fixtures and how many typically run together, and check whether a condensate drain point exists before recommending either platform. If the space and the demand both point the same direction, the decision is simple; if they pull in opposite directions — tight space but heavy demand — we'll walk you through the real trade-offs rather than force a fit. Installation pricing for either unit is a 2026 public-market ballpark, not a firm quote, and gets confirmed by CANRO's certified technicians once they've seen the space in person.

Safety note

If you smell gas anywhere near a water heater, notice a yellow or flickering flame, or soot around the unit, get everyone out of the house first and call FortisBC's emergency line at 1-800-663-9911 before doing anything else. Both units must be installed and vented by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870.

Frequently asked questions

Can the T-KJr2 handle a full house on its own?

It's built for lighter or more limited demand than a full-size condensing unit, so whether it can carry a whole house depends on how many fixtures run at once — we size it against your actual usage rather than assume.

Does a compact unit mean less maintenance?

Not really. Both platforms still need periodic descaling based on your water hardness; the compact unit just avoids the condensate line that a condensing unit needs cleaned and checked.

Is the T-KJr2 a good fit for a laneway house?

It often is, especially where the mechanical closet is shallow or there's no floor drain nearby for a condensate line, though we still confirm venting clearances before recommending it.

Why would I choose the larger T-H3 over the compact option if my space allows either?

If the household runs multiple fixtures at once — a shower, laundry, and a dishwasher together — the full-size condensing platform is generally built to hold output more comfortably under that kind of simultaneous draw.

Do compact tankless units still need a gas line check?

Yes. Even a compact unit can draw more gas instantaneously than an old tank, so we verify line sizing and meter capacity regardless of which series goes in.

Will I need a permit for a suite or laneway tankless install?

Yes, gas work and venting for a suite or laneway home require a permit like any other installation, and CANRO handles that as part of the job.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are CANRO technicians licensed and insured?
Yes. CANRO holds Technical Safety BC contractor licences for gas (LGA0043870) and boilers (LBP0046450), our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 359-1081, email info@canroheat.ca, or use the booking form. Provide the address, equipment and symptoms so CANRO can confirm the service scope and current appointment availability.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
A qualifying heat-pump project may be eligible under current BC programs. Check the program requirements, equipment and any required pre-approval before installation. The Canada Greener Homes Grant and Loan are closed to new applications. The program administrator determines eligibility and funding.
How quickly can you replace a broken hot water tank?
Contact CANRO with the equipment details and whether there is active leaking or no hot water. Timing depends on assessment, equipment availability, access and the required work; confirm scheduling when booking.
Why should I choose CANRO over other HVAC companies?
CANRO has been operating in Metro Vancouver since 1999 with a 4.9-star rating from 85+ Google reviews. We specialise in difficult boiler systems (Viessmann, IBC, Baxi, Laars) that many companies do not service, we give honest options instead of upselling, and our work is performed by long-term staff — not subcontractors.
Keep reading

Related water heater articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote