Crescent Beach's tight cottage lots and coastal exposure both factor into tankless water heater installations, which CANRO sizes and installs across the peninsula.
Tell us what you need—we’ll call you back fast.
Quick answer
A gas tankless water heater can be a good fit for a Crescent Beach cottage or rebuild that's tight on mechanical space, supplying hot water on demand rather than from a bulky storage tank. Installation needs the gas line sized for the unit's peak draw, venting suited to the coastal environment, and mounting placed to minimize exposure to salt air where the equipment terminates outside — as a ballpark, not a quote, installation typically runs $3,500 to $7,500 depending on what the gas and venting work involves.
Need a licensed gas fitter for your hot water / boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Crescent Beach's original cottages, many now renovated for full-time living, tend to have small mechanical spaces — sometimes a converted closet or a corner of a crawlspace that was never meant to hold a full-size storage tank. A wall-mounted tankless unit reclaims that floor space, which matters a lot on a property where every square foot of a small footprint counts.
Newer rebuilds on the peninsula also frequently choose tankless from the start, particularly when the mechanical room is being designed fresh and floor space is being weighed against other uses.
| Consideration | Why It Matters Here | What We Do |
|---|---|---|
| Vent termination exposure | Salt air accelerates corrosion at the exterior cap | Route and material chosen with exposure in mind |
| Gas line capacity | Tankless draws more gas at peak than most tanks | Line size and total meter load checked first |
| Mounting location | Small cottage footprints limit options | Placed to balance access and venting run length |
| Corrosion-resistant fittings | Longer service life near the water | Used where practical for exposed hardware |
A smaller original cottage with one or two bathrooms has fairly modest simultaneous hot water demand, so a smaller tankless unit is often sufficient. A larger rebuilt home with multiple bathrooms and a bigger household needs a unit sized to actually keep up with several fixtures running at once — this gets worked out from your household's real usage pattern rather than defaulted to a mid-size unit.
Scheduling that annual check a little earlier in the fall than you might elsewhere makes sense on this stretch of coastline, since it gives time to address any venting wear discovered before the wetter winter months put the system through its heaviest use. Homeowners who've just finished a cottage renovation often fold this first inspection into the general punch-list walkthrough with their contractor, which is a reasonable way to catch anything that was missed during the install.
If you're weighing tankless against simply replacing an old tank with a newer one, it's worth having both options priced honestly rather than assuming tankless is automatically the better long-term choice — for a smaller cottage with modest hot water demand, a straightforward tank swap can sometimes make just as much practical sense.
Safety note
If you smell gas anywhere near a water heater, boiler, or gas line, do not flip switches, light anything, or search for the source yourself. Leave the house, get everyone else out too, and call FortisBC at 1-800-663-9911 from a neighbour's place or your cell once you're outside. Gas piping, venting, and combustion equipment in your home must only be worked on by a Technical Safety BC licensed gas fitter.
Often yes, since it eliminates the floor footprint of a storage tank, which matters in the small mechanical spaces common in original Crescent Beach cottages.
It affects venting material choices and exterior termination placement, since salt-laden air accelerates corrosion on exposed hardware faster than it would inland.
It can, if sized correctly for the number of fixtures likely to run at once. This is worked out from your household's actual usage rather than assumed.
As a ballpark, not a quote, installations generally run $3,500 to $7,500 depending on the gas and venting work required for your specific property.
The core maintenance is the same as anywhere, but exterior venting benefits from closer inspection given the salt-air exposure on this stretch of coastline.
No. Gas line sizing, venting, and combustion setup must be done by a Technical Safety BC licensed gas fitter — this isn't optional for a gas-fired appliance.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.