What a Baxi boiler installation or replacement typically costs in Coquitlam, BC, and what changes the price.
Tell us what you need—we’ll call you back fast.
Quick answer
Replacing an existing boiler with a new Baxi in Coquitlam typically runs $7,500 to $15,000 or more, while a new install needing fresh venting, gas, or electrical work is usually $6,500 to $14,000 or more. Treat this as a Coquitlam-area ballpark based on current 2026 market data rather than a firm quote — the CANRO office and one of our certified gas technicians will confirm the real number once they've had a short look at your system. We work on Baxi boilers in Coquitlam the same way we do any other natural-gas hydronic system, following the manufacturer's documentation for the specific model in front of us.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Installing or replacing a Baxi boiler is one of the bigger mechanical investments a Coquitlam homeowner makes in a home's heating system, and the final number depends heavily on whether it's a straightforward swap or a more involved new installation. We work on Baxi boilers in Coquitlam the same way we do any other natural-gas hydronic system, following the manufacturer's documentation for the specific model in front of us.
For extra work beyond the flat installation price on a Coquitlam job — say, an unexpected code upgrade found mid-job — licensed gas labour bills at $95 to $165 an hour. Treat this as a Coquitlam-area ballpark based on current 2026 market data rather than a firm quote — the CANRO office and one of our certified gas technicians will confirm the real number once they've had a short look at your system.
| Item | Typical Range |
|---|---|
| Like-for-like Baxi boiler replacement | $7,500–$15,000+ |
| New Baxi boiler install (new venting/gas/electrical) | $6,500–$14,000+ |
| Licensed gas labour (work beyond the flat quote) | $95–$165 per hour |
Coquitlam spans the century-old character homes of Maillardville, many still on their original heating loop, up to newer hillside builds climbing Westwood Plateau and Burke Mountain.
Those hillside homes often put the mechanical room a full flight below the main entry, so pulling an old Baxi boiler out through a narrow basement stairwell adds real labour time.
The gas permit is issued by the City of Coquitlam, and on the steeper lots the technician also has to check how far a vent termination needs to run to clear a window or the property line.
If you're replacing an existing Baxi boiler in a Coquitlam home with a similar unit and the venting and gas line are already sized correctly, the job usually lands on the lower half of the replacement range.
A full new install — new venting, a larger gas line, or bringing an addition or suite onto its own heating loop — takes more labour and materials, which is why it can land in a similar range to a replacement even though the equipment cost itself may be lower. That trade-off shows up constantly on Coquitlam's hillside streets, where a straightforward swap can still take longer than the same job on a flat lot.
Our gas licence, LGA0043870, and boiler licence, LBP0046450, are both issued by Technical Safety BC, which covers exactly this kind of pressure-vessel work on Coquitlam homes.
Safety note
A boiler installation involves gas piping, venting, and a pressurized system, so it must be installed and commissioned by a Technical Safety BC licensed gas fitter under permit. If you ever smell gas near a newly installed or existing boiler, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 before doing anything else.
A straightforward replacement of an existing boiler is often finished within a day. A new install with venting or gas-line changes can take longer, especially if permit inspection has to happen partway through.
Yes, gas boiler installations need a permit, and in Coquitlam that goes through the City of Coquitlam. Your technician pulls that permit as part of the job and books the required inspection.
Any natural-gas boiler, including Baxi, can work well with the right venting and gas supply. The better question is usually about your home's heating load and existing infrastructure, which a technician can walk through during the assessment.
Ask your technician whether removal and disposal of the old unit is included in your specific quote, since that can vary by job. It's worth confirming before the work starts, not after.
FortisBC and CleanBC programs exist and change fairly often, so we'd rather have you confirm current eligibility with our office than quote a number that might be out of date by the time you read this.
Warranty terms are set by the manufacturer, so it's worth verifying your certificate for the exact coverage and any conditions once the unit is registered.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.