What a Baxi boiler installation or replacement typically costs in New Westminster, BC, and what changes the price.
Tell us what you need—we’ll call you back fast.
Quick answer
Replacing an existing boiler with a new Baxi in New Westminster typically runs $7,500 to $15,000 or more, while a new install needing fresh venting, gas, or electrical work is usually $6,500 to $14,000 or more. Consider this a ballpark pulled from public 2026 market data for the New Westminster market rather than a quote — a short assessment from one of our certified gas technicians is what turns it into a real number. We work on Baxi boilers in New Westminster the same way we do any other natural-gas hydronic system, following the manufacturer's documentation for the specific model in front of us.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Installing or replacing a Baxi boiler is one of the bigger mechanical investments a New Westminster homeowner makes in a home's heating system, and the final number depends heavily on whether it's a straightforward swap or a more involved new installation. We work on Baxi boilers in New Westminster the same way we do any other natural-gas hydronic system, following the manufacturer's documentation for the specific model in front of us.
For extra work beyond the flat installation price on a New Westminster job — say, an unexpected code upgrade found mid-job — licensed gas labour bills at $95 to $165 an hour. Consider this a ballpark pulled from public 2026 market data for the New Westminster market rather than a quote — a short assessment from one of our certified gas technicians is what turns it into a real number.
| Item | Typical Range |
|---|---|
| Like-for-like Baxi boiler replacement | $7,500–$15,000+ |
| New Baxi boiler install (new venting/gas/electrical) | $6,500–$14,000+ |
| Licensed gas labour (work beyond the flat quote) | $95–$165 per hour |
As one of the oldest incorporated cities in the province, New Westminster still has plenty of character homes with the original cast-iron radiators, some of which were converted from an old coal or oil boiler to natural gas without ever touching the radiator loop itself.
Uptown and Queen's Park sit well above the river, so a boiler swap in one of those hillside character homes often means moving equipment down a narrow interior stair rather than through a garage or side door.
The City of New Westminster issues the gas permit, and heritage-designated homes can add a review step before venting or gas-line changes are approved.
If you're replacing an existing Baxi boiler in a New Westminster home with a similar unit and the venting and gas line are already sized correctly, the job usually lands on the lower half of the replacement range.
A full new install — new venting, a larger gas line, or bringing an addition or suite onto its own heating loop — takes more labour and materials, which is why it can land in a similar range to a replacement even though the equipment cost itself may be lower. Heritage-designated streets in Uptown and Queen's Park are where that extra review step comes up most.
Our gas licence, LGA0043870, and boiler licence, LBP0046450, are both issued by Technical Safety BC, which covers exactly this kind of pressure-vessel work on New Westminster homes.
Safety note
A boiler installation involves gas piping, venting, and a pressurized system, so it must be installed and commissioned by a Technical Safety BC licensed gas fitter under permit. If you ever smell gas near a newly installed or existing boiler, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 before doing anything else.
A straightforward replacement of an existing boiler is often finished within a day. A new install with venting or gas-line changes can take longer, especially if permit inspection has to happen partway through.
Yes, gas boiler installations need a permit, and in New Westminster that goes through the City of New Westminster. Your technician pulls that permit as part of the job and books the required inspection.
Any natural-gas boiler, including Baxi, can work well with the right venting and gas supply. The better question is usually about your home's heating load and existing infrastructure, which a technician can walk through during the assessment.
Ask your technician whether removal and disposal of the old unit is included in your specific quote, since that can vary by job. It's worth confirming before the work starts, not after.
FortisBC and CleanBC programs exist and change fairly often, so we'd rather have you confirm current eligibility with our office than quote a number that might be out of date by the time you read this.
Warranty terms are set by the manufacturer, so it's worth verifying your certificate for the exact coverage and any conditions once the unit is registered.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.