🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Boiler Replacement Cost in Vancouver: 2026 Price Guide

Replacing a gas boiler in Vancouver is a ballpark of $7,500 to $15,000+, with the final figure set by the home, the venting and the radiators.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

In 2026, replacing a natural gas boiler in Vancouver is a ballpark of $7,500 to $15,000+. That is a ballpark, not a quote, and the CANRO office confirms the figure after a short assessment. The main things that move it are the type of boiler, venting changes, the gas line, the condition of the existing pipework and radiators, and access in older Vancouver homes.

Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

The ballpark first, and what moves it

A full boiler replacement in Vancouver is a ballpark of $7,500 to $15,000+. A new boiler install, where there is no existing unit to remove, is a ballpark of $6,500 to $14,000+, and a combi boiler that heats the house and supplies hot water is a ballpark of $9,000 to $16,000. All of these are ballparks, not quotes.

What moves the number is rarely the boiler alone. Venting, the condition of the existing system, access and the amount of tidy-up pipework often decide whether a job lands near the bottom or the top. The CANRO office confirms the figure after a short assessment, and you receive a written quote before work begins.

What a replacement normally includes

  • Removal and disposal of the old boiler.
  • A new gas boiler matched to the house's heat loss and the existing radiators or in-floor loops.
  • New venting where the old flue or chimney is unsuitable for the new unit.
  • Connection to the existing heating loop, pump, expansion tank, relief valve and controls.
  • Condensate drain arrangements for a condensing boiler.
  • Gas connection by a licensed fitter and the permit and inspection the work requires.
  • System flushing, commissioning and a walk-through of the controls.

CANRO holds gas licence LGA0043870 and boiler licence LBP0046450. A gas permit is a typical ballpark of $75 to $200 on its own and is part of the overall figure.

Vancouver homes and why they price differently

Vancouver's older character houses, post-war bungalows and Vancouver Specials are where most hydronic replacements happen. The old boiler is often an atmospheric unit with a masonry chimney, and a modern condensing boiler cannot share that flue. Venting through an outside wall brings its own considerations: clearances to windows, doors and property lines, and the noise or plume of the termination near a neighbour's wall in a narrow lot.

Mechanical rooms in basements and crawlspaces can be tight, and getting a heavy old cast-iron boiler out is real labour. In some older houses the insulation on old pipes is of a type that needs to be identified before it is disturbed, which can add steps. Suites and laneway units add zones, and an extra loop means extra controls and pipework.

Cost factors in plain terms

FactorEffect on priceWhy it matters in Vancouver
Boiler type (standard or combi)Combi sits at the higher ballparkCombi replaces a separate hot-water tank
Venting changeRaises the priceOld chimneys often unsuitable for a condensing unit
Gas line capacityMay add workOlder homes sometimes need a larger or re-routed gas line
Condition of pipework and radiatorsCan raise or lower itCast-iron systems are durable but may need cleaning
Access to the mechanical roomAdds labour in tight spacesBasement stairs and crawlspaces are common
Number of zonesMore zones, more controlsSuites and add-on loops
Permits and inspectionIncluded in the quoteGas permit ballpark is $75 to $200

Repair or replace?

Most boiler repairs are modest. A repair is typically a ballpark of $250 to $1,800, with most between $400 and $900. A control board is a ballpark of $570 to $1,040, a circulator pump $300 to $1,100, and a heat exchanger $840 to $2,180. The heat exchanger is the one that often tips a decision toward replacement, since it is the heart of the boiler.

Replacement also deserves attention when repairs are becoming frequent, parts are hard to find, the boiler is an old atmospheric model with a failing flue, or the system struggles to heat the house. Cost per year is a better yardstick than the number on any one invoice, and a technician should walk you through the reasoning.

How to compare quotes honestly

  1. Ask each contractor to name the boiler type and venting approach, so you are comparing the same job.
  2. Check that the quote includes removal, permit, commissioning and a condensate solution.
  3. Ask what happens if the existing pipework turns out to be in worse shape than expected.
  4. Confirm the contractor holds the gas and boiler licences needed, and ask to see them.
  5. Ask who the warranty is with and read the manufacturer's certificate yourself.
  6. Be cautious of a quote that is very far below the others, since something has likely been left out.

Timing in fall 2026

If your boiler is failing and the weather is turning, October is better than January for scheduling. Summer is when replacement work is easiest to plan, but a failing boiler cannot always wait. Rebate programs through FortisBC, CleanBC and the federal government change, so confirm current eligibility before you sign; the Greener Homes Grant is closed, and any loan or provincial program should be checked directly.

Safety note

If you smell gas, leave the home straight away, do not use switches, and call FortisBC at 1-800-663-9911 from outside. If a carbon monoxide alarm sounds, everyone goes outside and you call 911. Boiler replacement involves gas and venting and must be done by a Technical Safety BC licensed gas fitter with the correct permit.

Frequently asked questions

Why is there such a wide range in boiler replacement cost?

Because the boiler is only part of the job. Venting, access, pipework, the number of zones and whether you want a combi all change the work, which is why a short assessment comes before a quote.

Is the ballpark the final price?

No. It is a ballpark, not a quote. The CANRO office confirms the figure after a short assessment and a written quote follows before any work is done.

Can I keep my cast-iron radiators?

In many cases yes. Cast iron is long-lived, and the new boiler is sized to work with it. The technician checks the loop and pipework condition before recommending anything.

Do I need a permit?

Gas boiler replacement requires a gas permit and inspection. The contractor arranges it, and the permit cost is typically a ballpark of $75 to $200.

How long does a replacement take?

Scope decides it. A like-for-like swap in an accessible room is quicker than a job with new venting and pipe changes. The office can give an expected duration after the assessment.

Does the manufacturer's warranty change the price?

Warranty terms are set by each manufacturer, so verify your certificate. We do not promise terms, and a quote should explain what is covered by the manufacturer and what by the installer.

Related CANRO services
More help in Vancouver
The same topic in nearby areas

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a boiler be serviced?
Annual servicing is recommended for all residential boilers. CANRO's annual service includes combustion analysis, heat exchanger inspection, expansion tank pressure check, condensate trap cleaning, and a full safety check. Annual maintenance is also required to keep most manufacturer warranties valid.
How much does a new boiler cost in Vancouver?
A typical residential high-efficiency gas boiler in Metro Vancouver costs $7,500–$15,000 installed, depending on size, brand, and whether the system is heating only or a combi unit that also handles hot water. CANRO provides a free written quote with three options at different price points.
How long does a boiler last?
A well-maintained cast-iron boiler can last 25–30 years, a modern high-efficiency condensing boiler typically lasts 15–20 years, and a combi boiler 12–18 years. Annual servicing has the single biggest impact on lifespan.
My boiler is making a banging or kettling noise. Is that dangerous?
Kettling (a banging or whistling sound) is usually caused by limescale build-up on the heat exchanger and is a sign the system is overheating in localised spots. It will not always cause immediate failure but it shortens the life of the boiler and should be addressed within a few weeks.
Do you service Viessmann, IBC, Baxi, Laars, and Weil-McLain boilers?
Yes. CANRO is one of the few HVAC companies in the Lower Mainland with deep experience on European and high-end North American boilers including Viessmann, IBC, Baxi, Laars, Weil-McLain, NTI, Navien and Rinnai. We carry common parts in the truck.
Should I repair or replace my old boiler?
A useful rule: if the boiler is more than 15 years old and the repair cost is more than 50% of replacement, replacement is the better investment. CANRO will give you both a repair quote and a replacement quote and let you decide.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related gas boiler services articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote