What a Bosch boiler repair call actually looks like in one of Vancouver's older character homes.
Tell us what you need—we’ll call you back fast.
Quick answer
A Bosch boiler repair in Vancouver typically runs $250 to $1,800, with most calls landing around $400 to $900, plus a $90 to $150 service call generally credited toward the repair. These are 2026 ballpark figures from current market data, not a fixed price — CANRO's technicians confirm the actual cost once they've diagnosed your specific fault.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A lot of the boilers a technician sees on Vancouver repair calls are feeding original cast-iron radiator systems in character homes and Vancouver Specials, which means diagnosing a heating complaint sometimes involves checking whether the fault is really in the boiler or in the radiator loop's own circulation and balancing. Soft reservoir water across most of the city keeps scale-related failures somewhat less common here than in areas relying on harder well water, though age-related component wear is still the most frequent cause of a service call.
| Item | 2026 ballpark (CAD) |
|---|---|
| Service call / diagnostic visit | $90 – $150 (credited toward repair) |
| Typical repair bill | $250 – $1,800, most $400 – $900 |
| Licensed gas fitter labour rate | $95 – $165 per hour |
If your boiler is under ten years old and the fault is one identifiable part, repairing it is almost always the sensible choice. The picture changes for the many older boilers still feeding original radiator systems across this city, especially past fifteen years — once a major component like a heat exchanger is the problem, a repair bill can start closing the gap with what a new, more efficient installation would cost, and a properly matched new unit often heats those old radiator loops more evenly.
There's no blanket rule for exactly when to switch from repair to replacement; ask your technician for an honest, specific comparison for your system.
Some Vancouver properties run heating or domestic hot water to a laneway house off the same boiler as the main residence, which means a fault affecting one structure can sometimes trace back to demand from the other. If both buildings are having heating or hot water trouble at once, mention that clearly when booking, since it points the technician toward the shared equipment rather than something isolated to one unit.
If only the laneway house is affected while the main house heats normally, the issue is more likely in the piping or controls specific to that structure rather than the boiler itself.
A technician checks gas supply pressure, ignition sequence, flame signal, and any fault indication on the control panel, working through the likely causes systematically. On homes with original radiator systems, that often includes confirming heat is reaching every radiator properly, since a problem that looks like a boiler fault sometimes traces back to the piping instead.
Most Vancouver repairs are completed within that first visit if the part is on hand. If something needs sourcing, expect a realistic timeline, and narrow-lot or laneway properties may add a bit of setup time for equipment.
Safety note
If you notice a gas odour or soot buildup near an old chimney conversion, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 from a safe location. Boiler repair work in BC must be performed by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870 and boiler licence LBP0046450.
If your boiler feeds original cast-iron radiators, the technician sometimes needs to confirm whether a heating complaint is actually a boiler fault or a circulation issue in the radiator piping, which adds diagnostic time.
Most repairs land between $400 and $900, with the full possible range running $250 to $1,800 depending on the failed component and diagnostic time.
Yes, CANRO generally applies the $90 to $150 diagnostic fee toward the final repair cost once you approve the work.
It could be, but uneven heat across an original radiator system is often a circulation or balancing issue in the piping rather than the boiler itself, which a technician can isolate during the visit.
Soft reservoir water across most of the city means scale-related wear is somewhat less common than in areas on harder well water, though age-related component failures still happen regardless of water quality.
Under ten years old with one failed part, repair almost always wins. Past fifteen years with a major component like a heat exchanger failing, compare the repair bill honestly against a new installation.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.