How CANRO plans a Bryant furnace installation for Garrison Crossing and Vedder Crossing homes replacing an original builder-installed furnace.
Tell us what you need—we’ll call you back fast.
Quick answer
Many Garrison Crossing and Vedder Crossing homes are now old enough that the original builder-grade furnace is reaching replacement age. CANRO sizes a new Bryant furnace to the home's actual heat loss rather than just matching the old unit, handles the City of Chilliwack gas permit, and tests combustion before finishing the job. Installation pricing runs a ballpark of $4,500 to 9,500 or more.
Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A lot of the housing around Garrison Crossing and Vedder Crossing went in during a fairly narrow building boom, and that means a wave of original furnaces is reaching fifteen to twenty years old around the same time. Those furnaces were typically the base-model equipment specified by the builder rather than something chosen for the specific home, and homeowners looking to replace often want to know whether a step up in furnace quality is worth it. CANRO's answer depends on the house: a well-sealed, well-ducted home doesn't always need a premium furnace to heat evenly, while a home with known cold spots may benefit more from a two-stage unit than from spending more on the same single-stage type.
Before quoting a Bryant furnace, CANRO measures the home's heat loss, walks the existing ductwork to check sizing and condition, and confirms the gas line and venting will work with the new equipment. In townhome and closely spaced single-family settings like Garrison Crossing, venting clearances to windows, doors, and neighbouring walls matter more than in a home with more open space around it, so that gets checked on site rather than assumed from a floor plan.
Bryant furnaces are engineered alongside Carrier's lineup and cover a similar range from basic single-stage models to higher-efficiency options. CANRO installs Bryant without presenting itself as a factory-authorized dealer; the value in the installation comes from correctly sizing the unit to the home and doing the gas, venting, and electrical work to code, not from any brand exclusivity.
On the day of the install, the old furnace is disconnected and removed, the new Bryant furnace is set and connected to gas, power, and venting, and the whole system is run through a heating cycle while the technician checks combustion and airflow. The gas connection gets a pressure test as a standard step. Before wrapping up, the technician reviews the new thermostat and filter location with the homeowner and confirms the paperwork for inspection where a permit requires one.
Installing or replacing a furnace in Chilliwack falls in a ballpark of $4,500 to 9,500 or more — this is a ballpark, not a quote. Where a job lands in that range depends on the furnace's stage and capacity, whether venting needs to be rerouted for clearance reasons, and how accessible the mechanical closet or crawlspace is. In a townhome specifically, shared walls can also mean giving a neighbour a heads-up about the work window out of courtesy, even though the installation itself only involves the one home. CANRO gives an exact number after a short assessment of the specific property.
Safety note
A furnace installation includes connecting and pressure-testing a gas line and confirming safe venting clearances — this has to be done by a Technical Safety BC licensed gas fitter. If you smell gas near a furnace or vent, leave the home and call FortisBC at 1-800-663-9911 from a safe location.
It depends on the home and the furnace's condition, but many homeowners prefer to replace on their own schedule rather than risk a breakdown during a cold snap. CANRO can assess the current furnace's condition and give an honest opinion either way.
The underlying rules are the same, but closely spaced buildings mean venting clearances to windows, doors, and neighbouring walls need more careful checking on site.
It depends on the home — a home with cold spots or big temperature swings between rooms often benefits from two-stage operation, while a well-sealed, evenly ducted home may not need it.
It's a ballpark of $4,500 to 9,500 or more depending on the furnace chosen and the scope of venting or ductwork work involved, confirmed after a short assessment.
No — CANRO sizes and installs based on the home's heat loss and ductwork, not on matching the previous furnace's brand.
Where the City of Chilliwack permit requires an inspection, CANRO leaves the completed work ready for it as part of the job.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.