Installing a new Buderus boiler in a Vancouver character home often means updating more than just the appliance itself.
Tell us what you need—we’ll call you back fast.
Quick answer
A new Buderus boiler installation in Vancouver typically runs $6,500–$14,000+, and a full replacement runs $7,500–$15,000+ — this is a ballpark drawn from 2026 public pricing, not a quote for your job. Canro's licensed technicians will give you a firm number after a short assessment, not before.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
| Scenario | Typical range |
|---|---|
| New installation | $6,500–$14,000+ |
| Full replacement | $7,500–$15,000+ |
| Labour, itemized separately | $95–$165 per hour |
A lot of Vancouver's boiler replacements happen in pre-war and Vancouver Special-era homes where the original gas line and venting were sized for an older, less efficient boiler decades ago. Bringing those up to what a new condensing Buderus unit needs is often the biggest variable in the job, more so than the boiler itself.
Because older Vancouver homes can uncover more supporting work once the mechanical room is actually opened up, it's worth having a technician assess the site in person before assuming a number, rather than pricing purely off a phone conversation. Planning a known replacement ahead of a cold snap also gives more room to address any gas line or venting surprises without pressure.
Warranty coverage on a new Buderus boiler depends on the specific model and its registration, so confirm the certificate's terms rather than assuming a fixed length applies. FortisBC and CleanBC programs for high-efficiency gas equipment exist and change periodically, so verify current eligibility directly with the office rather than assuming a specific rebate amount.
Because so much of Vancouver's boiler-heated housing stock predates current gas code, a technician may identify a gas line upgrade as part of the assessment even if you weren't expecting one. Flagging this possibility upfront, rather than treating it as a surprise mid-project, helps homeowners plan the full scope and budget realistically.
Older Vancouver homes occasionally have knob-and-tube era electrical still nearby the mechanical room, which a technician will flag if it's relevant to safely powering the new boiler's controls, even though it's a separate scope from the gas and venting work itself.
A post-installation walkthrough covers the new boiler's basic operation, thermostat integration, and where to find your warranty documentation, which matters especially in a character home where the previous owner's paperwork may not have been passed along.
A technician will also confirm during the site visit whether the home's electrical supply to the mechanical room is adequate for a new condensing boiler's control system, since some older Vancouver homes have wiring that predates modern appliance requirements and may need a minor update.
CANRO documents the completed installation with a summary of the work performed and the specific model installed, which is useful for warranty reference and for any future technician working on the system.
Safety note
Treat any hint of a gas smell or a CO alarm as an emergency: leave the home, call FortisBC at 1-800-663-9911 from outside, and wait for a licensed gas fitter before anyone goes near the mechanical room again.
The original gas line and venting were often sized for a different, older boiler, so bringing those up to what a new condensing unit needs can add work beyond the appliance swap itself.
In most cases yes, provided they're in good condition and properly sized for the new boiler's output, which your technician assesses during the visit.
Yes, and CANRO's licensed technicians handle the permit and inspection process as part of the installation.
A new condensing boiler typically vents directly through an exterior wall rather than the chimney, so that's a common change on older Vancouver installs.
Most jobs are completed within a day or two, though homes needing significant gas line or venting work may take longer; your technician will give a realistic timeline upfront.
Sizing is based on an actual heating load calculation, not the home's era, so a smaller character home may well need a smaller unit than a larger newer one.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.