What Port Coquitlam homeowners can expect to pay for a Burnham gas boiler repair, from older post-war homes to newer riverside infill.
Tell us what you need—we’ll call you back fast.
Quick answer
In Port Coquitlam, a Burnham boiler repair typically costs $250 to $1,800, with most calls settling around $400 to $900 once the $90–$150 diagnostic fee is credited toward the fix. That's a ballpark from 2026 public market data, not a quote — a CANRO technician confirms the real number after a short on-site assessment.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
The diagnostic visit ($90–$150) covers checking ignition, gas pressure, flame sensing, and the circulator before deciding on the repair, and it's credited toward the fix once the work is approved.
Repairs in Port Coquitlam fall inside the broader $250 to $1,800 range, though most calls settle around $400 to $900 — the band that typically covers a circulator pump, gas valve, or control board replacement. More extensive repairs, including anything touching the heat exchanger, sit toward the top of that range, with extra labour billed at $95 to $165 an hour.
| Repair scenario | Typical cost |
|---|---|
| Diagnostic visit | $90–$150 (credited) |
| Most common repair bills | $400–$900 |
| Full range, simple to complex | $250–$1,800 |
| Extra labour beyond diagnosis | $95–$165/hour |
Port Coquitlam has a real mix of older post-war bungalows, many with original or first-generation replacement boilers, alongside newer infill construction along the Coquitlam River corridor. That age spread is the main reason two houses on the same street can have very different repair histories — the older bungalows are simply more likely to be due for component replacement on age alone.
The city sits on Metro Vancouver's soft reservoir water, so scale-driven repairs are less common here than in Fraser Valley well-water communities, which tends to keep the repair pattern focused on straightforward age-related wear rather than mineral buildup.
Access is generally straightforward in Port Coquitlam's older bungalow neighbourhoods, with boilers typically in open basements. The bigger cost variable is the specific failure — a sensor or igniter is quick, while a control board or gas valve issue takes more time and parts cost.
The city's growth along the Coquitlam River corridor over the past couple of decades means a technician might see a first-generation repair on a newer infill home the same week as a decades-old original unit two streets over — the parts pricing doesn't change, but the likely cause of the call often does.
A repair under roughly a third of full replacement cost, on a boiler younger than about fifteen years, is usually worth doing. On an older post-war bungalow's original boiler with a heat exchanger failure, replacement is typically the smarter long-term move.
A technician checks gas pressure, inspects venting, and runs the ignition sequence to confirm the fault before quoting a firm repair price — no work beyond diagnosis starts until you've approved it.
On an older bungalow's original boiler, the visit often includes a brief comment on overall condition beyond the immediate fault — not to push a sale, but because it's useful information to have on hand before the next thing happens to fail.
On newer infill homes along the river corridor, repair visits tend to be more straightforward, since the equipment and gas infrastructure involved is typically closer to current code from the outset. Either way, you'll know the confirmed cause and the price before any part actually gets replaced.
Safety note
If you smell gas, hear hissing near the boiler, or a carbon monoxide alarm goes off, leave the house immediately and call FortisBC at 1-800-663-9911 from outside. Gas line, venting, and combustion work must be done by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870.
Typically $250 to $1,800, with most Port Coquitlam repairs landing around $400 to $900 once the diagnostic fee is applied.
Yes — a lot of Port Coquitlam's post-war housing stock is still running original or early-replacement boilers, which are now at the age where components like igniters and control boards commonly fail.
Yes, the $90–$150 fee is credited toward the repair cost if you proceed with the fix that same visit.
It's soft Metro Vancouver reservoir water, so scale-related wear is less of a factor here than in well-water areas of the Fraser Valley.
Often yes, for common component failures — a heat exchanger failure at an older age is usually the point where replacement makes more financial sense.
A technician inspects the unit in person and confirms the price before starting any work beyond the initial diagnostic.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.