On a larger Blundell property, the ductwork distributing the heat often matters as much to comfort as the furnace generating it, and both deserve attention at installation.
Tell us what you need—we’ll call you back fast.
Quick answer
Furnace installation is a natural point to look at the whole heating system, not just the unit itself. On larger Blundell lots with more square footage to condition, CANRO reviews ductwork and distribution alongside the new Coleman furnace rather than treating the installation as an isolated swap.
Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Blundell has a number of larger single-family homes on generous lots, and a new furnace installation there is a reasonable moment to look at the whole system that delivers comfort to the house, not just the unit that generates the heat. A perfectly good new furnace connected to ductwork that has never quite balanced the home properly will still leave some rooms less comfortable than others.
This is not about upselling unnecessary work. It is about being honest that a furnace installation and a whole-home comfort review are naturally connected projects, and pointing that out at the right moment rather than leaving a homeowner to notice the same uneven heating with a brand-new furnace that they had with the old one.
The core installation steps are the same as any furnace replacement: a load calculation for the home, confirming venting and gas line suit the new unit, pulling the required permit, and a full commissioning check once the furnace is in place. The comfort review is a separate conversation we have alongside that, not a substitute for it.
Some homeowners want the furnace replaced and nothing else touched, and that is a completely reasonable choice we will respect. Others want the comfort issues addressed at the same time, while walls and access points are already open for the furnace work. We will lay out the options honestly either way.
Furnace installation and replacement runs roughly $4,500 to $9,500 or more as a ballpark, not a quote, for the furnace itself. Any additional duct balancing or zoning work is priced and explained separately, so you can decide what is worth doing now versus later.
If you chose a straightforward furnace-only replacement and later decide the comfort issues are worth addressing, that door stays open; nothing about a basic installation prevents a duct balancing or zoning project down the line. It simply becomes a separate assessment at whatever point you are ready for it.
If you did include comfort work at the same time as the furnace installation, give the house a full season to settle in before judging the results, since some rooms take a bit of time under real seasonal conditions to show whether the adjustment fully solved the imbalance or only improved it.
Either way, we would rather hear from you if a room still is not performing the way you expected than have you assume nothing more can be done. Sometimes a small follow-up adjustment resolves what a larger project would have been overkill for.
Safety note
All gas connection work is completed by a Technical Safety BC licensed gas fitter regardless of how much additional comfort work is included. If you ever smell gas near the furnace or ductwork, leave the home and call FortisBC at 1-800-663-9911.
No, that is entirely your choice. We will point out what we notice, but a straightforward furnace replacement on its own is a completely reasonable option.
Not usually if the uneven heating was caused by ductwork or balancing issues rather than a weak furnace. A new furnace connected to the same imbalanced ductwork will often show the same pattern.
A look at ductwork sizing, damper settings, and return air adequacy across the home, to identify whether the distribution system, not just the furnace, is contributing to comfort issues.
We will discuss it and its cost separately from the furnace installation itself, so you can decide whether it is worth doing at the same time.
It depends on the specific home. Sometimes the furnace needs to be sized up; other times the existing furnace capacity was fine and distribution was the real issue. We assess rather than assume.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.