Furnace Ignitor Replacement Near Me – Vancouver’s Trusted HVAC Experts
A properly functioning
furnace ignitor is essential for ensuring your heating system works efficiently, especially during Vancouver’s cold winters. The
furnace ignitor is a critical component that ignites the burners, allowing the system to generate heat and distribute warm air throughout your home or business. If your furnace is not producing heat, struggles to turn on, or cycles frequently, the ignitor may be faulty and require a
professional furnace ignitor replacement.
At
CANRO Heating & Cooling, we provide
expert furnace ignitor replacement in Vancouver and surrounding areas, servicing all major brands, including
Lennox, Carrier, Trane, Goodman, Amana, Bryant, Rheem, York, and more. Our licensed HVAC technicians offer
same-day service and same-day emergency repairs, ensuring your home or business stays warm and comfortable year-round. Whether you're in
Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Delta, Langley, New Westminster, or any other area in the Lower Mainland, we are your trusted local experts for fast and reliable
furnace ignitor replacements.
What is a Furnace Ignitor and Why is It Important?
The furnace ignitor is responsible for igniting the gas in your furnace’s burners, allowing the system to generate heat. Modern furnaces typically use
electronic ignitors instead of traditional pilot lights. There are two common types:
1. Hot Surface Ignitor (HSI)
- A hot surface ignitor works by using an electrical current to heat a ceramic or silicon carbide element.
- Once it reaches a high temperature, it ignites the gas in the burner.
- Hot surface ignitors are more energy-efficient than traditional pilot lights and are commonly found in modern furnaces.
2. Intermittent Pilot Ignitor
- This type of ignitor uses an electronic spark to light the gas in the pilot assembly, which then ignites the burners.
- It only operates when the furnace calls for heat, making it more efficient than standing pilot lights.
A malfunctioning ignitor can prevent your furnace from operating properly, leading to
no heat, frequent cycling, or complete system failure. If you suspect an issue with your ignitor,
CANRO Heating & Cooling is ready to help with a
fast, professional furnace ignitor replacement near you in Vancouver.
Signs That Your Furnace Ignitor Needs Replacement
A failing ignitor can cause various furnace problems. If you notice any of the following signs, it’s time to schedule an ignitor replacement:
1. Furnace Not Producing Heat
- If your furnace is blowing cold air or not producing heat, the ignitor may be faulty and unable to light the burners.
- This is one of the most common signs that a replacement is needed.
2. Furnace Struggles to Turn On
- A weak or damaged ignitor may take multiple attempts to ignite the burners, causing the furnace to cycle on and off.
- If your system struggles to start, the ignitor could be failing.
3. Short Cycling
- If your furnace turns on and off frequently, it may indicate that the ignitor is not maintaining a consistent flame.
- This can lead to increased energy bills and reduced system efficiency.
4. Clicking or Humming Noises
- A clicking sound can indicate that the ignitor is attempting to light but failing to do so.
- A continuous humming noise could suggest an electrical issue within the ignitor.
5. Visible Damage to the Ignitor
- Over time, ignitors can crack or become covered in carbon buildup, preventing them from functioning properly.
- If you see visible signs of wear, the ignitor should be replaced immediately.
6. Yellow or Weak Pilot Flame
- If your furnace has a pilot light and the flame is yellow instead of blue, this could indicate a problem with the ignitor or gas flow.
Ignoring these warning signs can lead to
complete furnace failure, leaving you without heat during Vancouver’s coldest months. Contact
CANRO Heating & Cooling for a
professional furnace ignitor replacement near you to restore your system’s performance.
Common Causes of Furnace Ignitor Failure
Furnace ignitors can fail for several reasons, including:
1. Normal Wear and Tear
- Furnace ignitors typically last 3 to 7 years depending on usage and maintenance.
- Repeated heating and cooling cycles cause stress on the ignitor, leading to eventual failure.
2. Electrical Issues
- Power surges, voltage fluctuations, or faulty wiring can damage the ignitor’s electrical components.
- A bad control board or transformer can also affect ignitor performance.
3. Dirt and Debris Buildup
- Dust, dirt, and carbon buildup can prevent the ignitor from reaching the required temperature.
- Regular maintenance helps keep the ignitor clean and functioning properly.
4. High Humidity and Moisture Exposure
- If the furnace is in a damp or humid location, moisture can cause corrosion and damage the ignitor over time.
5. Gas Supply Issues
- If the gas valve is faulty or there is a disruption in the gas supply, the ignitor may fail to light the burners.
If your furnace ignitor has stopped working,
CANRO Heating & Cooling provides
expert furnace ignitor replacement services near you in Vancouver.
Our Furnace Ignitor Replacement Process
At
CANRO Heating & Cooling, we follow a
detailed and professional process to ensure your furnace ignitor is replaced correctly for optimal performance.
1. Comprehensive Furnace Inspection
- We check the ignitor, burners, gas valve, and control board to diagnose the issue accurately.
- If the ignitor is faulty, we recommend a replacement.
2. Safe Removal of the Old Ignitor
- We turn off the furnace and safely remove the damaged ignitor.
- Our technicians take care to prevent any damage to surrounding components.
3. Installing the New Ignitor
- We install a high-quality, manufacturer-approved ignitor that matches your furnace model.
- Proper alignment and positioning ensure optimal ignition performance.
4. System Testing and Calibration
- After installation, we test the furnace by running multiple heating cycles.
- We check for proper ignition, flame stability, and efficiency.
5. Final Safety and Performance Check
- We ensure all safety controls are working correctly.
- Our technicians provide maintenance tips to extend the lifespan of your new ignitor.
Why Choose CANRO Heating & Cooling for Furnace Ignitor Replacement?
- Licensed & Experienced HVAC Technicians – Our team is fully licensed, insured, and trained in furnace repairs and replacements.
- Same-Day & Same-Day Emergency Service – We offer fast, reliable service in Vancouver and surrounding areas.
- Affordable & Transparent Pricing – No hidden fees—just honest, upfront pricing.
- All Major Furnace Brands Supported – We service Lennox, Carrier, Trane, Goodman, Bryant, Amana, Rheem, York, and more.
- Customer Satisfaction Guarantee – We stand by our work and ensure your furnace runs efficiently.
Serving Vancouver and the Entire Lower Mainland
We proudly offer
furnace ignitor replacement services near you in:
- Vancouver
- Burnaby
- Richmond
- Surrey
- Langley
- Coquitlam
- Port Coquitlam
- Delta
- White Rock
- New Westminster
- North Vancouver
- West Vancouver
- Maple Ridge
- Chilliwack
- Abbotsford
Furnace Ignitor Replacement Near Me – Vancouver’s Trusted HVAC Experts- What is a furnace ignitor? A furnace ignitor is a small but crucial component that ignites the gas in your furnace to produce heat. Modern furnaces typically use electronic ignitors, which are more energy-efficient and reliable than traditional pilot lights.
- How do I know if my furnace ignitor is faulty? Signs of a failing ignitor include no heat, frequent furnace cycling, delayed ignition, a clicking sound without ignition, and a sudden increase in energy bills due to inefficient operation.
- What causes a furnace ignitor to fail? Common causes include age, wear and tear, dirt buildup, electrical issues, moisture exposure, or a cracked ignitor surface. Regular maintenance helps extend its lifespan.
- Can I replace a furnace ignitor myself? While replacing a furnace ignitor may seem simple, it involves handling high-voltage components and gas connections, which can be dangerous if not done correctly. Hiring a certified HVAC technician from CANRO Heating & Cooling ensures safe and proper installation.
- How much does furnace ignitor replacement cost in Vancouver? The cost typically ranges from $150 to $350, including parts and labor. Prices vary based on the furnace model and ignitor type. CANRO Heating & Cooling offers competitive pricing and free estimates.
- How long does it take to replace a furnace ignitor? The replacement process usually takes 30 to 60 minutes, depending on furnace accessibility and whether other components need inspection or servicing.
- Can a bad ignitor damage my furnace? Yes, a malfunctioning ignitor can cause excessive wear on the system, frequent cycling, and even prevent your furnace from operating properly, leading to bigger repair issues.
- How often should a furnace ignitor be replaced? Most furnace ignitors last 3 to 7 years, but their lifespan depends on usage, maintenance, and overall furnace condition.
- Why won’t my furnace start even after replacing the ignitor? If the new ignitor doesn’t solve the issue, the problem could be a faulty flame sensor, gas valve, pressure switch, or control board. Our technicians can diagnose and fix the underlying issue.
- Do you offer same-day furnace ignitor replacement in Vancouver? Yes! CANRO Heating & Cooling provides same-day and emergency furnace repairs to restore heat to your home quickly.
- What furnace brands do you service? We replace ignitors for all major furnace brands, including Lennox, Carrier, Trane, Goodman, Rheem, York, Bryant, Amana, and more.
- Can cold weather cause my furnace ignitor to fail? Yes, extreme cold can put extra strain on your ignitor, especially if it’s already worn out or damaged.
- How do I prevent my furnace ignitor from failing? Regular maintenance, cleaning, and ensuring proper voltage and gas pressure help extend the lifespan of your ignitor.
- What should I do if my furnace ignitor fails in the middle of the night? Contact CANRO Heating & Cooling for same-day emergency furnace repair in Vancouver to restore heat as soon as possible.
- Is a furnace ignitor replacement covered under warranty? Many furnace manufacturers offer 5 to 10-year warranties on major components, but labor costs may not be included. We can help check your warranty coverage.
- Can a dirty air filter affect my furnace ignitor? Yes, a clogged air filter reduces airflow, causing the furnace to overheat and potentially damaging the ignitor.
- Why is my furnace ignitor glowing but not igniting the gas? This could indicate a gas valve issue, blocked burner ports, or a faulty control board. A professional inspection is needed to determine the exact cause.
- Will a cracked ignitor still work? No, even a small crack can prevent the ignitor from heating up properly, leading to ignition failure. It must be replaced.
- Do you provide maintenance plans to prevent ignitor issues? Yes! Our maintenance plans include seasonal furnace inspections, cleaning, and early ignitor replacement if needed.
- How can I schedule a furnace ignitor replacement in Vancouver? Call CANRO Heating & Cooling at 604-359-1081 or email info@Canroheat.ca to book your service today.
- Does a furnace ignitor need calibration? No, ignitors do not need calibration, but they must be correctly positioned and securely connected for proper operation.
- What happens if I delay replacing a bad ignitor? A failing ignitor can lead to a complete furnace breakdown, increased energy costs, and potential safety risks.
- Do you offer financing options for furnace repairs? Yes! We provide affordable financing plans for furnace repairs and replacements in Vancouver.
- Can a furnace ignitor fail suddenly? Yes, an ignitor can fail unexpectedly, especially if it’s old or exposed to power surges.
- What’s the difference between a hot surface ignitor and a spark ignitor? A hot surface ignitor (HSI) uses electric resistance to heat up, while a spark ignitor generates a spark to ignite the gas. We replace both types.
- Can frequent power outages damage my furnace ignitor? Yes, voltage fluctuations from outages or surges can shorten the lifespan of electronic ignitors.
- Is replacing a furnace ignitor a common repair? Yes, ignitor replacement is one of the most frequent furnace repairs, especially in older systems.
- Will replacing the ignitor improve furnace efficiency? Yes! A properly functioning ignitor ensures faster and more reliable heating, reducing energy waste.
- Can I clean my furnace ignitor to extend its life? It’s best to let a professional clean the ignitor, as it is delicate and easily damaged.
- What if my new ignitor keeps burning out? Frequent ignitor failure could indicate high voltage issues, a short circuit, or improper gas pressure, requiring professional diagnosis.
- How do I know if my thermostat is causing ignitor problems? If the ignitor isn’t receiving power, the issue could be a faulty thermostat, wiring problem, or bad furnace control board.
- What should I check before calling for an ignitor replacement? Ensure the thermostat is set correctly, the circuit breaker hasn’t tripped, and the air filter is clean. If the furnace still won’t start, call us for service.
- Can I use a universal ignitor for my furnace? Some universal ignitors work with multiple brands, but it’s best to use the manufacturer-recommended ignitor for optimal performance.
- How do I extend the life of my new ignitor? Routine maintenance, keeping the furnace clean, and avoiding frequent power cycling help prolong ignitor lifespan.
- Does CANRO Heating & Cooling offer emergency ignitor replacements? Yes! We provide same-day emergency furnace repairs in Vancouver and surrounding areas.
- What areas do you serve for furnace ignitor replacements? We service Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, Langley, Delta, New Westminster, Maple Ridge, Abbotsford, and beyond.
- What if my ignitor is fine but my furnace still won’t ignite? Other issues, such as a bad flame sensor, faulty gas valve, or clogged burners, may be the cause. We can diagnose and fix the problem.
- Why choose CANRO Heating & Cooling for my furnace ignitor replacement? We offer fast, reliable, and affordable service, experienced HVAC technicians, same-day repairs, and guaranteed satisfaction.
For expert
furnace ignitor replacement near you in Vancouver, call
604-359-1081 or email
info@Canroheat.ca now! 🚀
Get Your Furnace Ignitor Replaced Today – Call CANRO Heating & Cooling!
Don’t let a faulty ignitor leave you in the cold.
Contact CANRO Heating & Cooling today for
expert furnace ignitor replacement services in Vancouver and nearby areas.
Call
604-359-1081 for immediate assistance.
Email
info@Canroheat.ca to schedule your service.
Book your furnace ignitor replacement now and keep your home warm and comfortable! Expert insights: furnaces in Metro Vancouver
What follows is the practical information CANRO shares with Metro Vancouver homeowners about furnaces during in-home consultations. A modern high-efficiency gas furnace in Metro Vancouver operates at 95-98% AFUE, modulating its burner output between 40% and 100% to match demand. Vancouver's mild climate means short, frequent run cycles, which favours variable-speed ECM blowers and two-stage or modulating gas valves.
Vancouver's mild winters (average lows above -5°C and rare deep cold snaps) shape equipment selection differently than colder Canadian cities. CANRO has worked with furnace systems across Metro Vancouver since 1999, including installations and service calls in Broadmoor, Maple Ridge, Broadmoor and Edgemont.
Technical considerations for furnaces in Metro Vancouver
Sizing. Proper furnace sizing requires a Manual J load calculation — most Vancouver homes need 50,000-90,000 BTU, but oversized furnaces short-cycle, accelerate component wear and produce uneven temperatures.
Lifespan. A well-maintained high-efficiency gas furnace lasts 15-20 years in Vancouver. The single biggest factor in lifespan is annual professional servicing — combustion analysis, condensate trap cleaning, and igniter inspection prevent 80% of mid-life failures.
Warning signs. A failing furnace usually announces itself: short-cycling, yellow flame (should be blue), rising gas bills, uneven heating between rooms, banging on startup, or persistent error codes on the control board.
What CANRO checks during a furnace service
- Combustion analysis (CO, CO2, O2, stack temperature)
- Heat-exchanger inspection (cracks, corrosion)
- Flame sensor cleaning
- Hot-surface ignitor test
- Gas pressure verification (inlet + manifold)
- Condensate trap and drain clearing
- Blower motor amp draw and bearing check
- Filter replacement and airflow verification
- Limit switch and rollout safety test
- Thermostat calibration and response check
Why Metro Vancouver homeowners choose CANRO for furnace work
- Founded 1999 — over 25 years of a high-efficiency gas furnace installations and service calls in Metro Vancouver
- 4.9-star rating from 85+ verified Google reviews
- Direct workers, no subcontractors — the tech who installs your system is the one who answers when you call back
- Free written estimates on installations; transparent diagnostic fee on repairs (credited toward the repair if you proceed)
- TSBC-licensed gas fitter, Red Seal HVAC, WorkSafeBC and liability insured
- Permits filed and inspected on every gas-appliance install (BC Code-compliant)
- Brand specialist coverage: Viessmann, IBC, Baxi, Laars, Weil-McLain, Navien, Rinnai, Bradford White, Carrier, Lennox, Bryant, Goodman, Mitsubishi, Daikin, Bosch and more
Furnace FAQs
Do I really need annual furnace servicing in Vancouver?
Yes. Annual professional servicing catches 80% of mid-life failures before they cause a no-heat call. It also keeps manufacturer warranties valid — most are voided by missing scheduled maintenance. The service includes combustion analysis, heat-exchanger inspection, flame-sensor cleaning, blower-motor check, condensate-trap clearing, and a full safety test for carbon monoxide.
What AFUE rating should I look for in a new Vancouver furnace?
For Metro Vancouver homes, 95-97% AFUE is the sweet spot — high enough to qualify for FortisBC rebates and capture nearly all available efficiency gains, but without paying a premium for the very last 1-2% from 98% AFUE modulating units. ENERGY STAR-certified models above 95% AFUE are required for current rebate programs.
Two-stage vs modulating gas furnace — what's right for Vancouver?
Two-stage furnaces (high/low burner) are a good fit for most Vancouver homes — they cut short-cycling and run quieter than single-stage units. Modulating furnaces (continuously variable burner output) are worth the premium in larger homes (3,000+ sq ft), homes with significant temperature zones, or homes prioritising the absolute quietest operation.
How much does furnace installation cost in Metro Vancouver?
A typical residential high-efficiency gas furnace installation in Metro Vancouver costs $4,500-$8,500 including the equipment, venting, gas-line work, permit, electrical, and removal of the old unit. Variable-speed and modulating models are at the upper end. CANRO provides three quote tiers (good/better/best) so you can choose the right balance for your home and budget.
Can I install a heat pump and skip the furnace altogether?
Yes — for most Metro Vancouver homes, a cold-climate heat pump alone provides 100% of heating needs down to -10°C. Some homeowners choose a dual-fuel setup (heat pump + small gas furnace as back-up for the rare deep cold snap), but this is rarely necessary in our climate.
Why does my furnace short-cycle (turn on and off rapidly)?
Short-cycling typically indicates one of: an over-sized furnace for the home, a dirty flame sensor, a clogged condensate drain triggering shutdown, low gas pressure, a failing limit switch, or a thermostat located in a non-representative spot (in direct sunlight, near a vent). All are diagnosed quickly during a service call.
Book furnace service in Metro Vancouver
To book furnace service or get a free written quote for installation, call CANRO at (604) 359-1081 or email info@canroheat.ca. We service all of Metro Vancouver including Broadmoor, Maple Ridge, Broadmoor and Edgemont.
This guide was written by the CANRO Heating & Cooling team based on 25+ years of furnace installation, repair and annual service work across Metro Vancouver. Last reviewed May 2026.
