🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Furnace Installation Cost in Dunbar

A new gas furnace installation in Dunbar generally falls between $4,500 and $9,500 or more, with sizing for larger homes a bigger factor than in most neighbourhoods.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

As a ballpark — not a quote — a new gas furnace installation typically runs $4,500 to $9,500 or more, confirmed after a home assessment. In Dunbar, where homes and additions tend to be larger than average, correct furnace sizing and duct capacity play a bigger role in where a specific job lands within that range.

Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

The Ballpark Range

A gas furnace installation in the Dunbar area generally falls between $4,500 and $9,500 or more as a ballpark based on current market conditions, not a quote. Furnace size, ductwork condition, venting requirements, and access to the mechanical room all factor into where a specific job lands. Your exact price is confirmed by the CANRO office after a short assessment.

Why Sizing Moves the Price Here More Than Elsewhere

Dunbar's larger lots and homes, many with additions or finished basements added over the decades, mean a proper load calculation often points to a bigger furnace than a like-for-like swap would assume. Installing the right size for a genuinely large home — and confirming the ductwork can actually deliver that airflow to every room, including additions — is more involved than a straightforward installation in a smaller, unmodified house, and that's reflected in where the job lands within the range.

What Else Moves the Price Within the Range

  • Whether existing ductwork can be reused or needs modification to serve an addition properly
  • Venting type and termination requirements, including daylight-basement or hillside-lot considerations
  • Gas line condition and sizing
  • Access to the mechanical room
  • Permit and inspection requirements through the City of Vancouver

What's Included in a Professional Installation

A proper installation includes a load calculation based on the home's actual current square footage, gas line connection and testing, venting that meets current code, ductwork capacity verification, the municipal permit, and full commissioning with a combustion and safety test before the crew leaves. Skipping the load calculation step is exactly how a furnace ends up undersized for a home that's grown since it was originally built.

For a home with a finished basement or a rear addition, it's also worth having the technician confirm during the assessment that ductwork feeding those spaces was sized properly the first time. Occasionally it wasn't, and installation day is a natural point to correct that alongside the furnace itself rather than treating them as separate projects later on.

New Build vs. Adding to an Existing System

Installing a furnace where one has never existed — a new addition with its own zone, for instance — is a different scope than replacing what's already there, and tends to land toward the higher end of the range since it involves new ductwork and gas line runs from scratch. Extending an existing furnace's reach to cover a newly finished space, by contrast, sometimes just means resizing and rebalancing what's already in place, which can be less involved.

Getting an Exact Quote

Call the office to book an assessment. A technician will walk through the home, note any additions or finished spaces, check the existing ductwork and venting, and give you a firm number before work starts — the ballpark above is a starting point for that conversation, not the final word.

Safety note

If you ever smell gas during or after an installation, leave the home immediately and call FortisBC at 1-800-663-9911 from outside. Gas furnace installation must be performed and commissioned by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870.

Frequently asked questions

Is $4,500 to $9,500 a firm quote for a larger Dunbar home?

No — it's a ballpark. Larger homes with additions sometimes land toward the higher end because of sizing and ductwork needs, but your exact price is confirmed after an assessment.

Why does an addition affect the installation price?

An addition changes the home's total heating load, which can mean a larger furnace and additional ductwork capacity are needed to heat the added space properly.

Do I need a permit for a furnace installation in Dunbar?

Yes, gas furnace installations require a City of Vancouver permit, and CANRO handles that as part of the installation process.

Will a daylight basement affect the cost?

It can affect venting termination requirements, which is assessed during the visit, though it doesn't automatically raise or lower the price on its own.

How long does installation take in a larger home?

It can take longer than in a smaller property, particularly if ductwork needs modification to properly serve an addition — this is discussed upfront.

Does the quote include removing the old furnace?

Yes, removal and disposal of the old unit is part of a standard installation — confirm the specifics when you get your quote.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related furnace articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote