Last updated: May 28, 2026 · CANRO Heating & Cooling, TSBC Class-A licensed since 1999.
Direct Answer
CANRO provides licensed furnace services services in Richmond and across Metro Vancouver — TSBC Class-A gas fitters, Red Seal HVAC technicians, same-day dispatch where possible. Typical pricing: $89–$11,500. Free written quotes for installs. 1-year labour warranty on every job. Call (604) 359-1081.
TSBC Class-A gas-fitting
•
Red Seal certified
•
4.9★ 85+ Google reviews
•
WorkSafeBC insured
•
Since 1999
Looking for reliable furnace services in Richmond? CANRO is the Burnaby-based HVAC and gas-fitting company that has served Richmond since 1999. Whether you live in Steveston, Brighouse, Thompson, Hamilton, Seafair, our two-person crews cover all of Richmond with same-day diagnostic and 1-2 day installs for most jobs.
Furnace Services in Richmond — what is included
- TSBC Class-A licensed gas fitters for any gas work.
- Red Seal HVAC technicians for full system diagnostics.
- Onsite written quote before work proceeds — no surprises.
- Common parts in every truck — most repairs same visit.
- Richmond municipal permit filed by CANRO (where required).
- FortisBC, CleanBC, and BC Hydro rebate paperwork filed on every qualifying install.
- 1-year labour warranty on every job + manufacturer parts/heat-exchanger warranty.
- Combustion analysis + safety verification on every gas appliance.
Richmond pricing for furnace services
Typical pricing: $89–$11,500. Final pricing depends on your specific Richmond home, existing equipment, gas/electrical capacity, and chosen brand. CANRO provides a free written quote after in-home consultation — no obligation.
Richmond neighbourhoods we serve
Every part of Richmond including Steveston, Brighouse, Thompson, Hamilton, Seafair, and surrounding areas.
Why CANRO for furnace services in Richmond
- 27 years in Metro Vancouver — thousands of Richmond-area jobs.
- 14-vehicle service fleet based in Burnaby — fast Richmond dispatch.
- Authorized installer for top brands: Navien, NTI, IBC, Viessmann, Triangle Tube, Mitsubishi, Daikin, Carrier, Lennox, Bosch, Bradford White, Rheem.
- 4.9★ from 85+ verified Google reviews.
- WorkSafeBC + $5M liability insurance.
- Transparent written pricing with three tiers (good/better/best).
Furnace Services in Richmond — Free Quote
Call (604) 359-1081 for a free in-home consultation. TSBC-licensed. Same-day where possible.
📞 (604) 359-1081 Request a quoteFrequently asked questions
Q: How often should I schedule furnace services in Richmond?
A: Annually — required by most premium brand warranties. CANRO offers single-visit and 2-visit annual plans.
Q: What is included in the service?
A: Combustion analysis (gas appliances), efficiency test, electrical/safety check, written service report.
Q: How long does the visit take in Richmond?
A: 45-90 minutes onsite depending on the appliance and condition.
Q: How much does annual furnace services cost in Richmond?
A: Typical $89–$11,500.
Q: Do you service all brands?
A: Yes — CANRO services Navien, NTI, IBC, Viessmann, Triangle Tube, Carrier, Lennox, Mitsubishi, Daikin, and 15+ other brands.
About CANRO
CANRO Heating & Cooling is a Burnaby-based HVAC and gas-fitting company serving Metro Vancouver since 1999. TSBC Class-A gas-fitting licence. Red Seal HVAC technicians. WorkSafeBC registered. 4.9★ rating across 85+ verified Google reviews. Authorized installer for Navien, NTI, IBC, Viessmann, Triangle Tube, Mitsubishi, Daikin, Carrier, Lennox, Bosch, Bradford White, Rheem, and others.
CANRO Heating & Cooling — TSBC Class-A gas-fitting licence · Red Seal HVAC certified · WorkSafeBC and liability insured · 4.9★ from 85+ Google reviews · Serving Metro Vancouver since 1999.
Expert insights: furnaces in Metro Vancouver
What follows is the practical information CANRO shares with Metro Vancouver homeowners about furnaces during in-home consultations. A modern high-efficiency gas furnace in Metro Vancouver operates at 95-98% AFUE, modulating its burner output between 40% and 100% to match demand. Vancouver's mild climate means short, frequent run cycles, which favours variable-speed ECM blowers and two-stage or modulating gas valves.
BC's building code, TSBC gas-fitting rules, and FortisBC's natural-gas service standards together govern every HVAC installation in Metro Vancouver — CANRO works under permit and inspection on every gas-appliance install. CANRO has worked with furnace systems across Metro Vancouver since 1999, including installations and service calls in Deep Cove, Brentwood, Kitsilano and Lynn Valley.
Technical considerations for furnaces in Metro Vancouver
Sizing. Proper furnace sizing requires a Manual J load calculation — most Vancouver homes need 50,000-90,000 BTU, but oversized furnaces short-cycle, accelerate component wear and produce uneven temperatures.
Lifespan. A well-maintained high-efficiency gas furnace lasts 15-20 years in Vancouver. The single biggest factor in lifespan is annual professional servicing — combustion analysis, condensate trap cleaning, and igniter inspection prevent 80% of mid-life failures.
Warning signs. A failing furnace usually announces itself: short-cycling, yellow flame (should be blue), rising gas bills, uneven heating between rooms, banging on startup, or persistent error codes on the control board.
What CANRO checks during a furnace service
- Combustion analysis (CO, CO2, O2, stack temperature)
- Heat-exchanger inspection (cracks, corrosion)
- Flame sensor cleaning
- Hot-surface ignitor test
- Gas pressure verification (inlet + manifold)
- Condensate trap and drain clearing
- Blower motor amp draw and bearing check
- Filter replacement and airflow verification
- Limit switch and rollout safety test
- Thermostat calibration and response check
Why Metro Vancouver homeowners choose CANRO for furnace work
- Founded 1999 — over 25 years of a high-efficiency gas furnace installations and service calls in Metro Vancouver
- 4.9-star rating from 85+ verified Google reviews
- Direct workers, no subcontractors — the tech who installs your system is the one who answers when you call back
- Free written estimates on installations; transparent diagnostic fee on repairs (credited toward the repair if you proceed)
- TSBC-licensed gas fitter, Red Seal HVAC, WorkSafeBC and liability insured
- Permits filed and inspected on every gas-appliance install (BC Code-compliant)
- Brand specialist coverage: Viessmann, IBC, Baxi, Laars, Weil-McLain, Navien, Rinnai, Bradford White, Carrier, Lennox, Bryant, Goodman, Mitsubishi, Daikin, Bosch and more
Furnace FAQs
Do I really need annual furnace servicing in Vancouver?
Yes. Annual professional servicing catches 80% of mid-life failures before they cause a no-heat call. It also keeps manufacturer warranties valid — most are voided by missing scheduled maintenance. The service includes combustion analysis, heat-exchanger inspection, flame-sensor cleaning, blower-motor check, condensate-trap clearing, and a full safety test for carbon monoxide.
What AFUE rating should I look for in a new Vancouver furnace?
For Metro Vancouver homes, 95-97% AFUE is the sweet spot — high enough to qualify for FortisBC rebates and capture nearly all available efficiency gains, but without paying a premium for the very last 1-2% from 98% AFUE modulating units. ENERGY STAR-certified models above 95% AFUE are required for current rebate programs.
Two-stage vs modulating gas furnace — what's right for Vancouver?
Two-stage furnaces (high/low burner) are a good fit for most Vancouver homes — they cut short-cycling and run quieter than single-stage units. Modulating furnaces (continuously variable burner output) are worth the premium in larger homes (3,000+ sq ft), homes with significant temperature zones, or homes prioritising the absolute quietest operation.
How much does furnace installation cost in Metro Vancouver?
A typical residential high-efficiency gas furnace installation in Metro Vancouver costs $4,500-$8,500 including the equipment, venting, gas-line work, permit, electrical, and removal of the old unit. Variable-speed and modulating models are at the upper end. CANRO provides three quote tiers (good/better/best) so you can choose the right balance for your home and budget.
Can I install a heat pump and skip the furnace altogether?
Yes — for most Metro Vancouver homes, a cold-climate heat pump alone provides 100% of heating needs down to -10°C. Some homeowners choose a dual-fuel setup (heat pump + small gas furnace as back-up for the rare deep cold snap), but this is rarely necessary in our climate.
Why does my furnace short-cycle (turn on and off rapidly)?
Short-cycling typically indicates one of: an over-sized furnace for the home, a dirty flame sensor, a clogged condensate drain triggering shutdown, low gas pressure, a failing limit switch, or a thermostat located in a non-representative spot (in direct sunlight, near a vent). All are diagnosed quickly during a service call.
Book furnace service in Metro Vancouver
To book furnace service or get a free written quote for installation, call CANRO at (604) 359-1081 or email info@canroheat.ca. We service all of Metro Vancouver including Deep Cove, Brentwood, Kitsilano and Lynn Valley.
This guide was written by the CANRO Heating & Cooling team based on 25+ years of furnace installation, repair and annual service work across Metro Vancouver. Last reviewed May 2026.
