A faint gas smell right at the boiler connection, not anywhere else in the house, is usually what brings a Coquitlam homeowner to this repair.
Tell us what you need—we’ll call you back fast.
Quick answer
Gas connector replacement on a residential boiler generally falls within CANRO's boiler repair ballpark of $250-$1,800, with most jobs coming in around $400-$900, plus the $90-$150 service-call fee credited toward the repair and $95-$165/hour labour for the visit. This is a 2026 public-market ballpark, not a fixed quote -- CANRO's certified gas technicians confirm the exact cost after inspecting the fitting and the surrounding gas piping.
Need a licensed gas fitter for your hot water / boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
The gas connector is the fitting, sometimes a flexible corrugated connector and sometimes rigid black pipe with a union, that links the household gas supply line to the boiler's own gas valve. It's a small but critical piece of the fuel path, and unlike most boiler components, any fault here is a direct gas-safety issue rather than just a performance problem, which is why it gets treated with more urgency than most other repairs on this list.
Most repairs on this list are worth scheduling within a reasonable window. A suspected gas connector leak is different -- if you can smell gas near the boiler, the correct sequence is to leave the home and call FortisBC's emergency line before doing anything else, not book a routine service appointment. Once the immediate safety response is handled, a licensed technician replaces the connector and pressure-tests the new connection before putting the boiler back into service.
| Item | Typical range |
|---|---|
| Diagnostic / service call (credited to repair) | $90-$150 |
| Labour, per hour | $95-$165 |
| Boiler repair bill, typical (most jobs) | $400-$900 |
| Boiler repair bill, full range | $250-$1,800 |
Gas connector replacement itself is a straightforward, contained repair with no bearing on the boiler's own service life. The one time it opens a bigger conversation is if a technician finds the surrounding gas piping is old, undersized for current code, or has other corrosion issues beyond just the connector, in which case addressing the whole gas run properly is the safer long-term fix rather than replacing just the one fitting and having a similar issue resurface at a different point along the line.
Homes in some of Coquitlam's older established areas, particularly houses that have had their heating system replaced at some point without a full review of the original gas piping, are more likely to have an aging connector that's simply reached the end of its service life through corrosion or repeated thermal cycling. Any gas fitting work in the city requires a permit through the City of Coquitlam alongside Technical Safety BC's provincial oversight, and a licensed technician will handle both aspects of that as part of the repair.
Safety note
A gas connector is a direct fuel-supply fitting, and any suspected leak or corrosion here is a safety matter, not a routine repair to schedule at leisure. If you smell gas anywhere near the boiler, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 from a safe location before doing anything else. This work must be done by a Technical Safety BC licensed gas fitter. CANRO holds gas licence LGA0043870 and boiler licence LBP0046450.
Leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 from a safe location before doing anything else, including trying to inspect or fix it yourself.
A soap-bubble test at each joint, or electronic gas detection equipment, lets a technician pinpoint exactly where a leak is coming from before making a repair.
No -- once a flexible connector shows signs of a leak or significant corrosion, it needs to be replaced outright rather than patched, since it's a relatively low-cost part relative to the safety risk of a repair that doesn't fully hold.
There's no fixed schedule for homeowners, but it's worth having a technician glance at it during any annual boiler service, since visual inspection can catch early corrosion before it becomes a leak.
Gas fitting work generally requires a permit through the City of Coquitlam alongside Technical Safety BC oversight, and a licensed contractor typically handles that process as part of the job.
Yes, a visual check of the gas connection is a standard part of an annual boiler service, since it's a quick check with real safety value.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.