Track indoor humidity, temperature and moisture sources to guide practical HVAC questions without treating air conditioning as a universal moisture fix.
Tell us what you need—we’ll call you back fast.
Updated 2026-09-18 · CANRO Heating & Cooling
Quick answer: If your home feels damp in summer, record humidity and temperature before changing equipment settings. “Clammy” describes a useful symptom, but a short log helps show whether it affects one room, the whole house or particular times of day.
A cooling system can remove moisture during operation, but it is not a substitute for investigating leaks or persistent moisture sources. Choose the next step from the pattern you observe.
Use the same humidity monitor in a representative location away from direct sun, a supply-air stream or an immediately wet surface. Record the time, room, temperature and relative humidity. If you compare rooms with different devices, remember that differences may partly reflect the instruments.
The EPA suggests keeping relative humidity below 60%, ideally 30–50% where possible. This is general moisture guidance, not a guarantee that every building surface will remain free of condensation at a particular reading.
Do not spend days collecting data before dealing with active water entry. Record what is safely visible and arrange the appropriate investigation promptly.
A damp smell or surface staining may require a moisture-source assessment beyond the HVAC system. Ask the service provider which part of the concern it can evaluate and whether another professional is needed. Avoid treating a lower thermostat setting as proof that a leak or building-envelope problem is resolved.
If the home is cool enough but still uncomfortable, tell the contractor that clearly. Further cooling may not be the right response. Provide the log and ask what measurements would clarify moisture removal and normal operation for the installed system.
Check the owner manual for the equipment's normal cooling and humidity-related controls. If a “dry” mode is available, read what it does for your model; the same label need not behave identically across products. Do not change installer settings to force longer operation without professional guidance.
Follow ordinary filter maintenance instructions and keep accessible grilles clear. Report water escaping from an indoor unit or a condensate problem rather than continuing to run it while changing settings.
Request an explanation of the observed condition and the scope of any proposed work. If a separate dehumidification solution is discussed, ask what problem it addresses, what drainage and maintenance it requires and how it coordinates with the existing system.
Keep the original log and repeat comparable observations after changes. The useful result is an improvement under understood conditions, not a promise that one humidity number or one product will solve every moisture issue in a Greater Vancouver home.
Tell CANRO about your equipment, your Greater Vancouver location and the question you need answered.
📞 (604) 359-1081Contact CANROTechnical references checked 2026-09-18. The planning examples are illustrative; equipment instructions and project requirements must be checked for your home.
For help with a residential HVAC project in Greater Vancouver, contact CANRO with your equipment details and the question you need answered.
“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.