Narrow side yards on some Pitt River-area properties change how equipment gets delivered to the mechanical room, and CANRO plans for that before install day.
Tell us what you need—we’ll call you back fast.
Quick answer
KeepRite has a long history as a value-tier furnace brand in the Canadian residential market. CANRO installs KeepRite furnaces in Port Coquitlam using the same process applied to every brand: a heat-load calculation matched to the actual home, venting placed to meet clearance rules, a pressure-tested gas connection, and full commissioning before the job wraps up.
Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
KeepRite is a longstanding value-tier name in the Canadian furnace market, generally positioned to compete on straightforward reliability rather than the most advanced variable-speed features. CANRO installs and services KeepRite furnaces as part of a broader lineup of brands, without claiming factory or authorized-dealer status. A well-installed, correctly sized furnace at this tier serves a lot of Port Coquitlam households perfectly well.
Some properties on the Pitt River side of Port Coquitlam sit on narrower lots with a tighter side yard as the only route to get equipment to a backyard or basement entrance. Moving a new furnace and hauling out an old one through a constrained side yard takes more planning than a job with direct garage or front-door access, and CANRO confirms the access route during the in-home assessment rather than discovering a tight squeeze on install day.
A tight access route doesn't change the furnace itself, but it can add time to the job and occasionally calls for different equipment-moving tools than a standard install. Flagging this ahead of time means the crew arrives prepared rather than adapting mid-job, which keeps the installation on schedule.
With the access route to the mechanical space already confirmed, CANRO removes the old furnace — gas, power, ductwork, and venting disconnected — and brings the new KeepRite furnace through the same route, setting it level and connecting it per the manufacturer's manual.
| Step | Detail |
|---|---|
| Pressure test | Gas line checked for leaks before first firing |
| Commissioning | Gas pressure, temperature rise, airflow, safety switches verified |
| Permit | Filed with the City of Port Coquitlam, inspection arranged as needed |
| Walkthrough | Thermostat and filter location covered before the crew leaves |
A KeepRite installation generally runs $4,500 to $9,500+, not a quote, confirmed once CANRO has assessed the home and its access route. A constrained side-yard delivery path that adds labour time tends to push a job toward the higher part of that range.
A new furnace is often noticeably quieter than the one it's replacing, particularly if the old unit was showing signs of age like a worn blower bearing, but it isn't silent. Normal sounds include a brief whoosh of the inducer motor at the start of a cycle, air moving through the ductwork, and the blower's operating hum. None of this should be alarming, and CANRO points out what's normal during the final walkthrough so you know what to expect in the first few weeks.
If anything sounds different from what was explained at the walkthrough, or seems to be getting louder over the following weeks rather than staying consistent, that's worth a call — new equipment can occasionally need a minor adjustment shortly after installation, and CANRO stands behind the installation itself.
Safety note
Furnace gas connection and commissioning must be carried out by a licensed gas fitter under Technical Safety BC; CANRO holds gas licence LGA0043870. If you ever smell gas in the home, leave immediately and call FortisBC's emergency line at 1-800-663-9911 from outside.
No — CANRO is an independent licensed contractor. We install and service KeepRite furnaces along with several other brands without claiming factory-authorized status.
It can, mainly through added labour time for manoeuvring equipment. CANRO confirms the access route and any impact on scheduling during the assessment.
Most single-furnace residential installs are completed in a day; constrained-access jobs can take a bit longer.
Yes, gas and mechanical permits go through the City of Port Coquitlam, and CANRO manages that process as part of the job.
Often yes, depending on sizing relative to the new furnace, which is confirmed during the in-home assessment.
The furnace, removal and disposal of the old unit, gas and venting connection, commissioning, and permit filing are all part of a standard installation.
No, some operating sound is normal — airflow, the inducer motor, and blower hum. CANRO explains what's normal during the walkthrough so you know what to expect.
That's worth a call. New equipment can occasionally need a minor adjustment shortly after installation, and CANRO stands behind the work.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.