The MFT Combi is one of Laarss flagship lines for Metro Vancouver homes. The MFT Combi pairs a high-modulation condensing boiler with integrated domestic-hot-water tankless functionality — ideal for Metro Vancouver homes with limited mechanical-room space.
Free in-home consultation. Free written quote. TSBC-licensed installers. FortisBC rebate paperwork included. Call (604) 359-1081 or request a quote online.
MFT Combi at a glance
| Spec | Value |
|---|
| Heat exchanger | Stainless fire-tube |
| Sizes | 140, 199 MBH heating; 6 GPM DHW |
| AFUE | 95% |
| Turndown | 7:1 |
| Venting | 2"-3" PVC/polypropylene |
| Warranty | 10 yr HE / 5 yr parts |
Who the MFT Combi is ideal for
- Smaller homes/townhouses 1,200-2,800 sq ft with low simultaneous DHW demand
- Tight mechanical rooms (combi saves space)
- One-bath or two-bath sequential use
Metro Vancouver install considerations
- Combi-boiler — single unit for heat + DHW
- Compact wall-hung footprint
- 7:1 turndown — best in class for shoulder season
Free quote · Free consultation
Considering a MFT Combi install in Metro Vancouver?
Get a free written quote and in-home consultation with a TSBC-licensed gas fitter. Three pricing tiers, FortisBC rebate paperwork included, no obligation.
📞 Call (604) 359-1081 Request a quote onlineWhat makes the MFT Combi stand out
- 7:1 turndown — modulates lower than most competitors
- Integrated DHW saves space and second appliance cost
- Smart controls with outdoor reset
Warranty
10 years heat exchanger, 5 years parts.
The CANRO install process
- Free in-home consultation. A senior technician visits, measures your home heat-loss, reviews existing plumbing and venting, and asks about your priorities.
- Written quote with three tiers (good / better / best) within 1-3 business days. All scope items broken out — equipment, labour, gas work, permit, removal of old unit, rebate.
- Permit filed with your municipality and inspection coordinated.
- Install day(s). Most boiler swap-outs complete in 4-8 hours; complex retrofits take 1-3 days. Heating and hot water are restored end-of-day where possible.
- Manufacturer commissioning: combustion analysis at low and high fire, outdoor reset curve setup, app pairing, gas-pressure verification, walkthrough with you.
- FortisBC rebate filed and manufacturer warranty registered in your name.
Why CANRO for Laars installs
- Laars-trained Red Seal technicians. We commission to manufacturer specification — combustion analysis at low and high fire, outdoor reset configured to your homes heat-loss curve, gas-pressure verification.
- TSBC Class-A gas-fitting licence. Every install is permitted with the City of Vancouver or your municipality and inspected per BC code.
- Laars parts in every truck. Common service items stocked locally — first-visit repair rate is one of the highest in BC.
- FortisBC rebate paperwork done for you. Up to $1,500 rebate on qualifying condensing models, filed by CANRO on your behalf.
- 1-year labour warranty + manufacturer warranty registered in your name.
- 4.9★ from 85+ verified Google reviews. Serving Metro Vancouver since 1999.
Pricing for MFT Combi installation in Metro Vancouver
Indicative installed pricing for the MFT Combi in Metro Vancouver (Vancouver, Burnaby, Surrey, Richmond, North Vancouver, Coquitlam) including equipment, labour, permit, direct-vent installation, condensate drain, removal of old unit, commissioning, and FortisBC rebate filing:
| Tier | Installed (after rebate) | What you get |
|---|
| Good | $8,500–$11,000 | Standard install with all required items |
| Better | $10,500–$13,500 | Upgraded controls, smart thermostat, premium piping |
| Best | $13,000–$17,500 | Premium components, multi-zone, extended warranty |
Exact pricing depends on your specific home, existing gas/venting, and chosen options. All quotes provided in writing before work proceeds.
Free consultation: what we cover
- Home heat-loss calculation (Manual J) to right-size the MFT Combi for your home
- Peak DHW demand check (combi/tankless models)
- Existing gas-line capacity verification
- Venting path inspection — direct-vent through wall vs vertical
- Condensate drain routing and freeze-protection planning
- Mechanical-room space confirmation
- Discussion of three pricing tiers and what each includes
- FortisBC rebate confirmation — which programs apply
- Realistic install timeline
- No obligation — written quote within 1-3 business days
Free quote · Free consultation
Considering a MFT Combi install in Metro Vancouver?
Get a free written quote and in-home consultation with a TSBC-licensed gas fitter. Three pricing tiers, FortisBC rebate paperwork included, no obligation.
📞 Call (604) 359-1081 Request a quote onlineFrequently asked questions about the MFT Combi
Frequently asked questions
Can MFT Combi handle two showers at once?
Marginally — 6 GPM caps simultaneous use. For 2-3 simultaneous use, consider dedicated boiler + tankless.
Is it good for radiant?
Yes — handles low-temp radiant well.
How does it compare to Navien combi?
Comparable; Laars MFT has slightly better heat-exchanger durability, Navien has more app features.
Permits required?
Yes — TSBC gas permit, CANRO files.
CANRO Heating & Cooling — TSBC Class-A gas-fitting licence · Red Seal HVAC certified · WorkSafeBC and liability insured · 4.9★ from 85+ Google reviews · Serving Metro Vancouver since 1999.
