A Technical Safety BC licensed gas fitter is required by law for gas water heater and boiler work in Burnaby, from new installations to venting and safety checks in older character homes.
Tell us what you need—we’ll call you back fast.
Quick answer
A licensed gas fitter in Burnaby is a technician certified by Technical Safety BC to legally install, repair, service, and inspect natural gas appliances such as water heaters and boilers. Gas work involves combustion, venting, and pressure, all areas where errors can create real hazards, which is why BC law requires this work to be performed by someone holding valid gas fitter certification.
Need a licensed gas fitter for your hot water / boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Technical Safety BC certifies gas fitters through a combination of apprenticeship training, examinations, and ongoing code knowledge covering combustion, venting design, gas piping sizing, and appliance-specific installation standards. A licensed gas fitter doesn't just connect an appliance and leave; they're trained to verify combustion air supply, test for leaks with approved methods, and confirm the venting is drafting properly before signing off on a job.
CANRO, based in Burnaby, holds gas licence LGA0043870 and boiler licence LBP0046450. Whichever company you hire for gas work on your Burnaby property, confirming current, valid licensing before work begins is a reasonable and important step.
Burnaby has a wide range of housing stock, from older character homes with original knob-and-tube-era mechanical rooms retrofitted over the decades, to hillside properties around Burnaby Mountain and Capitol Hill, to newer construction with modern venting already in place. A licensed gas fitter is trained to evaluate each situation individually, since an older character home's gas piping and venting often needs a different approach than a newer build.
Permitting is another part of the picture. Gas work in Burnaby generally requires a permit through the City of Burnaby, and a licensed gas fitter manages that process, including the final inspection that confirms the completed work meets current code.
| Question to Ask | Why It Matters |
|---|---|
| What is your current Technical Safety BC licence number? | Confirms legal authorization to perform the work |
| Will a permit be pulled for this job? | Most gas work in Burnaby legally requires one |
| Will you test the finished work for leaks and proper venting? | Confirms the job is actually safe before you start using it |
| Have you worked on homes like mine, older character homes or laneway setups? | Older and unusual layouts can involve details a standard job doesn't |
Safety note
If you ever smell gas, hear hissing near a gas line, or suspect a carbon monoxide problem, leave the home immediately and call FortisBC at 1-800-663-9911 from a safe location. Only a Technical Safety BC licensed gas fitter should open, adjust, or repair gas piping, venting, or combustion components on a boiler or gas water heater.
Yes, BC law requires gas fitting work to be performed by someone holding current Technical Safety BC licensing. Unlicensed work is both against the law and a genuine safety risk.
Ask directly for their current licence number, and Technical Safety BC maintains information that can help confirm a contractor's credentials are valid and current.
Generally yes, pulling the required City of Burnaby permit and coordinating the final inspection is a standard part of the job for a licensed gas fitter.
General gas appliance work falls under gas fitter licensing, while boiler-specific work also requires boiler licensing, which CANRO holds under licence LBP0046450 alongside gas licence LGA0043870.
Older homes often have mechanical rooms and gas piping that were modified over decades of renovations, so experience with that kind of layout can help a technician spot issues a newer-build-only background might miss.
Yes, unlicensed gas work can complicate insurance claims and create issues during a home sale, on top of the direct safety concern, which is another reason to confirm licensing upfront.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.