🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Lochinvar Boiler Installation Cost in North Vancouver

Housing stock and site conditions around North Vancouver both shape what a Lochinvar boiler installation actually costs.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

A new Lochinvar boiler installation in North Vancouver typically runs $6,500 to $14,000-plus, and a fuller replacement that includes venting or piping upgrades runs closer to $7,500 to $15,000-plus. These are 2026 ballpark ranges built from public market data, not a quote for your address — CANRO's certified gas technicians confirm the actual number after assessing your mechanical room and venting on site.

Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

What drives the price in North Vancouver

North Vancouver's mountainside streets and steep driveways mean equipment access can be a bigger factor in the quote than in a flatter municipality, and which local government issues the permit depends on whether the address falls in the City or the District.

What pushes a quote up or down

Steep-lot access, whether the mechanical room sits below grade on a sloped property, and how far equipment has to travel from the street all factor into a North Vancouver quote more than they do in flatter parts of the region.

ScopeTypical range
Diagnostic / site assessment$90 – $150
Boiler installation (like-for-like)$6,500 – $14,000+
Full boiler replacement (with upgrades)$7,500 – $15,000+

Working around an occupied home

Homes built into North Shore hillsides sometimes have mechanical rooms accessed by a set of exterior stairs rather than a direct garage or driveway route, so the crew plans logistics for moving the new boiler in ahead of time.

Permits through the City of North Vancouver or the District of North Vancouver, depending on the property's location

Boiler installations require a permit through the City of North Vancouver or the District of North Vancouver, depending on the property's location, including inspection of the new venting and gas connection before the job is signed off. CANRO pulls this permit as part of the install so the homeowner doesn't have to deal with the paperwork directly.

A typical North Vancouver scenario

A typical North Vancouver job is a hillside home with a below-grade mechanical room and steep exterior access; getting the new Lochinvar unit and its venting installed safely on a sloped lot is usually the main planning consideration beyond the appliance itself.

Financing, rebates, and warranty

North Vancouver homeowners upgrading an older boiler may qualify for FortisBC or CleanBC programs, but terms and amounts are set by those programs and change, so confirm current eligibility before assuming a specific rebate applies.

Safety note

If you ever smell gas or notice soot near a flue during or after a boiler installation, leave the house immediately and call FortisBC's emergency line, 1-800-663-9911, from outside before doing anything else. Installing or connecting a gas boiler must be done by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870 and boiler licence LBP0046450.

Frequently asked questions

How much does a Lochinvar boiler installation cost in North Vancouver?

A straightforward install in North Vancouver typically runs $6,500 to $14,000-plus, and a fuller replacement with upgraded venting or piping is closer to $7,500 to $15,000-plus. Both are 2026 ballpark figures, not a quote — CANRO confirms your number after seeing the mechanical room.

What makes one Lochinvar install cost more than another?

Boiler sizing for the home, how much of the existing venting and piping can be reused, whether zoning needs to be redone, and how easy the mechanical room is to access all move the number.

Do I need a permit to install a Lochinvar boiler in North Vancouver?

Yes. Gas boiler installations require a permit through the City of North Vancouver or the District of North Vancouver, depending on the property's location, and the completed work needs to pass inspection before it is signed off.

How long does a Lochinvar boiler installation take?

A like-for-like swap is often a one-day job. Anything that involves rerouting venting, upgrading gas line sizing, or redoing zoning can stretch to two or more days.

Should I repair my old boiler instead of replacing it?

If the existing unit is well into its service life and facing a major component failure, replacement usually makes more financial sense than one more large repair. A technician can walk you through the actual numbers for your unit.

Is a Lochinvar a good fit for my home?

Lochinvar makes both condensing and cast-iron residential boilers; the right model depends on your heating load, venting situation, and whether you want the higher efficiency of a condensing unit. CANRO sizes this to your home rather than defaulting to one model.

Does CANRO handle the permit for a North Vancouver boiler installation?

Yes — CANRO pulls the required permit through the City of North Vancouver or the District of North Vancouver, depending on the property's location and coordinates the inspection so you don't have to deal with the paperwork yourself.

Related CANRO pages

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a boiler be serviced?
Annual servicing is recommended for all residential boilers. CANRO's annual service includes combustion analysis, heat exchanger inspection, expansion tank pressure check, condensate trap cleaning, and a full safety check. Annual maintenance is also required to keep most manufacturer warranties valid.
How much does a new boiler cost in Vancouver?
A typical residential high-efficiency gas boiler in Metro Vancouver costs $7,500–$15,000 installed, depending on size, brand, and whether the system is heating only or a combi unit that also handles hot water. CANRO provides a free written quote with three options at different price points.
How long does a boiler last?
A well-maintained cast-iron boiler can last 25–30 years, a modern high-efficiency condensing boiler typically lasts 15–20 years, and a combi boiler 12–18 years. Annual servicing has the single biggest impact on lifespan.
My boiler is making a banging or kettling noise. Is that dangerous?
Kettling (a banging or whistling sound) is usually caused by limescale build-up on the heat exchanger and is a sign the system is overheating in localised spots. It will not always cause immediate failure but it shortens the life of the boiler and should be addressed within a few weeks.
Do you service Viessmann, IBC, Baxi, Laars, and Weil-McLain boilers?
Yes. CANRO is one of the few HVAC companies in the Lower Mainland with deep experience on European and high-end North American boilers including Viessmann, IBC, Baxi, Laars, Weil-McLain, NTI, Navien and Rinnai. We carry common parts in the truck.
Should I repair or replace my old boiler?
A useful rule: if the boiler is more than 15 years old and the repair cost is more than 50% of replacement, replacement is the better investment. CANRO will give you both a repair quote and a replacement quote and let you decide.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related lochinvar boilers articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote