Licensed, Red Seal technicians — same-day response across Metro Vancouver. Call (604) 359-1081 or request a free quote.
Tell us what you need—we’ll call you back fast.
Metro Vancouver homes have specific requirements when it comes to gas fireplaces, driven by climate, code, and the local housing stock. This page covers the essentials. Modern direct-vent gas fireplaces in Metro Vancouver provide 20,000-40,000 BTU of supplemental heat at 65-85% efficiency. Sealed combustion means no makeup air is drawn from inside the home, preserving indoor air quality.
Vancouver's mild winters (average lows above -5°C and rare deep cold snaps) shape equipment selection differently than colder Canadian cities. CANRO has worked with gas fireplace systems across Metro Vancouver since 1999, including installations and service calls in Steveston, Edgemont, Seafair and Cloverdale.
Sizing. Fireplace sizing depends on room size and intended use (ambience vs supplemental heat). For zone heating a 200-400 sq ft room, 25,000-35,000 BTU is typical.
Lifespan. A well-maintained gas fireplace lasts 20-30 years. Annual service — pilot-system cleaning, glass replacement check, and blower-motor lubrication — extends life and prevents pilot-light failures.
Warning signs. Fireplace issues include pilot-light failures (thermocouple wear), blower-motor noise or failure, glass clouding (incomplete combustion), and remote-control battery drain.
A typical new gas-fireplace install in Metro Vancouver costs $4,500-$9,500 depending on the unit, venting requirements, gas-line work, and any wall framing or finishing required. Direct-vent units with a horizontal exterior wall vent cost less than B-vent units requiring a vertical chimney.
Yes. Gas fireplace inserts drop into existing wood fireplace openings, requiring only a gas-line extension and a stainless vent liner up the existing chimney. CANRO installs Valor, Montigo, Mendota and other major brands in Metro Vancouver.
A well-maintained gas fireplace lasts 20-30 years. Major components (gas valve, blower motor, thermocouple) may need replacement at 8-15 years; the burner and heat exchanger typically last the life of the unit.
Modern direct-vent gas fireplaces with sealed combustion run at 65-85% efficiency and provide 20,000-40,000 BTU — enough to heat a 200-500 sq ft room comfortably. They're ideal for zone heating in homes with cold rooms or for backup heat during power outages (some models include manual ignition that runs without electricity).
Pilot light failures are almost always due to a worn thermocouple or thermopile (the small probe that detects the flame), a dusty pilot-light orifice, a weak pilot flame due to low gas pressure, or a failed gas-valve safety circuit. All are quick repairs.
Yes. Annual servicing keeps the pilot system clean, the burner ports clear, the glass front sealed, and the blower motor lubricated. It also includes a combustion safety check and carbon-monoxide test.
To book gas fireplace service or get a free written quote for installation, call CANRO at (604) 359-1081 or email info@canroheat.ca. We service all of Metro Vancouver including Steveston, Edgemont, Seafair and Cloverdale.
This guide was written by the CANRO Heating & Cooling team based on 25+ years of gas fireplace installation, repair and annual service work across Metro Vancouver. Last reviewed May 2026.
“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.