Last updated: May 28, 2026 · Written by CANRO Heating & Cooling, TSBC Class-A licensed since 1999 · Verified against 2026 FortisBC, BC Hydro, and CleanBC rate cards.
Direct Answer
CANRO is the authorized installer of the Navien NCB-240E across Burnaby. Typical installed cost in Burnaby: see table below. Free in-home consultation includes Manual J heat-loss calculation and three-tier quote. TSBC-licensed gas fitters. FortisBC rebates filed by CANRO.
Quick Facts
| Navien NCB-240E installed in Burnaby | See pricing table |
| FortisBC rebate | $500 – $2,000 |
| Typical install duration | 1-2 days |
| From quote to install | 1-2 weeks |
| Warranty | 10-15 yr HE + 1-yr CANRO labour |
| Permit | Filed by CANRO |
Navien NCB-240E in Burnaby
The Navien NCB-240E is one of the most-installed condensing units in Burnaby. CANRO is a certified Navien installer (factory training, OEM parts in stock). This guide covers everything Burnaby homeowners need to know about installing the NCB-240E.
Why the Navien NCB-240E is popular in Burnaby
- Right-sized for typical Burnaby home heating loads.
- Strong local parts depot — service-call response time is fast.
- FortisBC rebate-qualifying.
- Established Navien dealer ecosystem in Metro Vancouver.
Installation cost in Burnaby
| Tier | Installed cost | What you get |
|---|---|---|
| Good | $8,500–$11,000 | Standard install with required items |
| Better | $10,500–$13,500 | Upgraded thermostat, premium piping, recirc setup |
| Best | $13,000–$17,500 | Premium materials, multi-zone, extended warranty |
Exact pricing depends on your Burnaby home specifics. Final quote provided in writing after free in-home consultation.
The CANRO NCB-240E installation process in Burnaby
- Free in-home consultation. Senior tech visits your Burnaby home. Manual J heat-loss + gas/venting inspection.
- Written 3-tier quote within 1-3 business days.
- TSBC permit filed by CANRO.
- Install day(s). Typically 1-2 days for NCB-240E swap. Most start in the morning, finish by end of day 1 with hot water restored.
- Commissioning. Combustion analysis at low and high fire. Outdoor reset configured to your Burnaby home heat-loss curve.
- Final inspection with your municipality.
- FortisBC rebate paperwork filed by CANRO.
Navien NCB-240E highlights for Burnaby homes
- Mod range: Wide turndown handles Burnaby shoulder-season cleanly.
- Direct-vent: 2"-3" PVC through wall — most Burnaby retrofits.
- Smart controls: Outdoor reset + app monitoring.
- OEM warranty: Registered in your name by CANRO.
Get a Navien NCB-240E quote in Burnaby
TSBC-licensed. Authorized Navien installer. Free consultation. Call (604) 359-1081.
📞 (604) 359-1081 Request a quoteData sources
- FortisBC residential gas rates and rebate programs (2026)
- BC Hydro residential electricity rates and Power Smart program (2026)
- CleanBC Better Homes rebate program
- Technical Safety BC (TSBC) — gas-fitting licence and code requirements
- Natural Resources Canada — heat-pump and condensing technology standards
- CANRO Heating & Cooling internal install database (2,400+ Metro Vancouver projects, 1999-2026)
Frequently asked questions
Q: How much does Navien NCB-240E cost in Burnaby?
A: $8,500-$17,500 installed in Burnaby depending on configuration tier. Free written quote after consultation.
Q: Is CANRO an authorized installer?
A: Yes — CANRO is factory-trained on Navien and stocks OEM parts. We register your warranty.
Q: How long does the install take?
A: Most Navien NCB-240E installs in Burnaby complete in 1-2 days.
Q: What rebates apply?
A: FortisBC condensing rebate of $1,000-$2,000 plus possible bundle bonuses. CANRO files everything.
Q: Will it work for my Burnaby home?
A: CANRO’s Manual J heat-loss calculation during free consultation confirms right-sizing before quoting.
About the author
CANRO Heating & Cooling is a Burnaby-based HVAC and gas-fitting company serving Metro Vancouver since 1999. TSBC Class-A gas-fitting licence holder. Red Seal HVAC technicians. WorkSafeBC registered. Factory-trained authorized installer for Mitsubishi (Elite Diamond Dealer), Daikin (Comfort Pro), Navien (NCB Certified), IBC, Viessmann, Triangle Tube, Bosch, Bradford White, Rheem, and 15+ other manufacturers. 4.9★ rating across 85+ verified Google reviews. Office: 1100 Lougheed Hwy area, Burnaby, BC.
CANRO Heating & Cooling — TSBC Class-A gas-fitting licence · Red Seal HVAC certified · WorkSafeBC and liability insured · 4.9★ from 85+ Google reviews · Serving Metro Vancouver since 1999.
