CANRO's licensed gas fitters replace Rinnai RL series tankless water heaters in Port Moody, covering assessment, permits, install and a straight repair-vs-replace call.
Tell us what you need—we’ll call you back fast.
Quick answer
Replacing a Rinnai RL series tankless water heater in Port Moody means a licensed gas fitter assessing gas line sizing and venting, pulling a permit through the local municipality, and installing a new unit with proper isolation valves. CANRO handles RL series replacements across Port Moody and the Lower Mainland.
Need a licensed gas fitter for your tankless water heater? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
When a Rinnai RL series tankless water heater — a non-condensing tankless water heater — in a Port Moody home reaches the point where repair no longer makes sense, replacing it is a full mechanical job, not a plug-and-swap. CANRO's licensed gas fitters handle RL series replacements across Port Moody and the wider Metro Vancouver area.
Metro vancouver reservoir water reaches every part of the city, which is one of several things our technicians factor into sizing and placement recommendations for a new unit, alongside your household's actual hot-water demand.
None of these are hard rules — our Port Moody technicians look at the specific unit and give you a straight answer on whether a repair still makes sense before recommending replacement.
A proper tankless replacement in Port Moody is more than unbolting the old unit and hanging a new one. CANRO's process covers a site assessment to confirm gas line sizing, venting condition, and mounting location; a written estimate; pulling the required permit through the City of Port Moody building department; the install itself, including isolation valves and a service port if the original install didn't have them; and a final inspection tied to the permit.
Timing on a Port Moody job depends on permit turnaround and scheduling — we don't promise a same-week install date up front, but we'll give you a realistic timeline once the assessment is done.
Tankless install pricing in Port Moody varies with gas line work, venting changes, and whether the mounting location is changing. As a starting ballpark.
| Item | Typical ballpark |
|---|---|
| Tankless install | $3,500–$7,500 |
This is a 2026 public-market ballpark for Port Moody-area work, not a quote — CANRO's certified technicians confirm an actual price after a short in-home assessment, since venting runs and gas line condition vary a lot from house to house.
Port Moody has its own quirks that show up on a service call. Hillside streets rising from burrard inlet, with older neighbourhoods on steeper grades and newer development down near the waterfront shapes where a lot of these units end up mounted, and the local housing stock — a mix of older character homes on the hill and newer condo and townhome construction closer to the inlet (CANRO works single-family and townhome jobs, not shared multi-unit mechanical rooms) — affects how straightforward access and venting usually are. Hillside lots sometimes mean a vent termination has to clear a lower roofline or a neighbour's window setback, which the installer has to plan for before day one. Any gas or venting work here goes through the City of Port Moody building department, and CANRO pulls the permit as part of an install rather than skipping that step.
Most Port Moody homeowners replace a non-condensing unit with another non-condensing model, but if your household's hot-water demand has grown — more bathrooms, a hot tub, a basement suite — it's worth asking your technician whether a higher-capacity or condensing option would be a better fit for the house as it is today, not just a like-for-like swap.
Safety note
Tankless water heater replacement involves gas line and venting work that must be done by a Technical Safety BC licensed gas fitter — CANRO holds gas licence LGA0043870. If you ever smell gas, leave the home and call FortisBC at 1-800-663-9911 before doing anything else.
Tankless install pricing typically falls in the range noted above, with the final number depending on gas line sizing, venting changes, and mounting location. CANRO confirms exact pricing after an in-home assessment.
The install itself is usually a one-day job once permitted, though timing depends on the permit turnaround through your municipality and scheduling — CANRO gives a realistic timeline after the site visit rather than a blanket promise.
Yes — gas appliance replacement requires a permit through the City of Port Moody building department, and CANRO handles that as part of the job.
Often, yes — if your household's hot-water demand has grown, your technician can discuss whether a higher-capacity unit makes more sense than a like-for-like replacement, based on your actual fixture count and usage.
CANRO removes and disposes of the old unit as part of the replacement job.
No — CANRO is an independent, licensed HVAC and gas contractor. We install, service, and replace Rinnai units, but we're not claiming factory-authorized or dealer status.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.