A Ruud furnace installation in White Rock follows the same careful sizing and permitted process CANRO applies to any brand, with a typical cost ballpark of $4,500 to $9,500 or more depending on scope.
Tell us what you need—we’ll call you back fast.
Quick answer
Ruud shares core furnace engineering with its better-known sister brand but is sold through its own dealer network, giving White Rock homeowners another option at a similar general price and performance level. Installation starts with a proper load calculation for the home before any model is ordered.
Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Because Ruud's engineering overlaps significantly with a widely installed sister brand, availability and general performance tend to track closely, which can simplify the decision for homeowners comparing options.
The house still gets sized the same careful way regardless of which of the two names ends up on the furnace.
We run a load calculation, remove the old furnace safely, install the new Ruud unit with permitted gas and vent connections, and finish with a complete startup and combustion safety check.
The system is run through a full heating cycle before we consider the installation complete.
As a ballpark, not a quote, a Ruud furnace installation in White Rock typically runs $4,500 to $9,500 or more, depending on the model and any ductwork or venting changes needed. Exact pricing is confirmed by our office after a short assessment.
A lot of the housing stock on the flat streets above the beach dates to the 1950s and 60s, and those small post-war bungalows often have a compact crawlspace or half-basement where a furnace and its ductwork share tight quarters.
Streets on the upper bluff, above Marine Drive, are steep enough that getting a service vehicle parked and parts or a new furnace carried to the door takes a bit more thought than it does on a flat cul-de-sac.
We manage the permit application and inspection through the City of White Rock as part of the job.
Every CANRO installation covers sizing, safe removal of the old system, all permitted connections, a full safety check, and a plain-language walkthrough of the new furnace.
Replacing a Ruud furnace on a planned schedule, ahead of the cold season, generally goes more smoothly than an emergency swap — there's more room to confirm sizing and venting details properly.
We check access and vent termination location for your specific property as part of the pre-install assessment, which matters more on some of White Rock's older, narrower lots.
A clear path to the mechanical room, with anything stored nearby moved out of the way, is the single most useful thing you can do ahead of install day.
The house will be without heat for part of the day while the old unit comes out and the new one goes in — we'll talk through timing with you if that's a concern given the weather.
Safety note
Any work on the gas line, burner, or venting of a furnace has to be done by a Technical Safety BC licensed gas fitter, full stop. If you smell gas in or around the house, get everyone outside first and call FortisBC's emergency line at 1-800-663-9911 from a safe distance before touching a switch or a phone indoors.
They share core engineering and are sold through separate dealer networks; day-to-day performance is generally comparable, and we can walk you through any practical differences for your situation.
As a ballpark, not a quote, roughly $4,500 to $9,500 or more depending on model and scope, confirmed exactly by our office after assessing your home.
Yes, permit application and inspection scheduling are included in the installation.
Through a proper load calculation for your specific home, not by simply matching the old furnace's output.
CANRO is an independent, licensed Metro Vancouver gas contractor that installs and services Ruud gas furnaces; check with Ruud directly for dealer-specific questions.
Yes, safe removal and disposal is included as part of the installation.
Not particularly — CANRO installs and services both brands using the same process, and parts availability is generally comparable between the two.
That depends on what you choose; we'll cover thermostat options as part of the assessment if you'd like to replace your existing one.
In most cases yes — we assess the specific access and ductwork during the pre-install visit and flag anything that needs extra planning before scheduling the work.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.