North Vancouver's steep hillside lots and two separate municipal governments both come up more often on a boiler install here than in most Metro Vancouver cities.
Tell us what you need—we’ll call you back fast.
Quick answer
A Slant/Fin boiler installation in North Vancouver generally falls between $6,500–$14,000+ for a standalone install and $7,500–$15,000+ for a full replacement including re-piping and venting. That's a starting-point figure built from current 2026 public market data, not a fixed quote; CANRO confirms exact pricing once a certified technician has looked at your specific unit and access.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
| Line item | Ballpark (CAD) |
|---|---|
| Standalone Slant/Fin boiler install | $6,500–$14,000+ |
| Full boiler replacement (removal, re-pipe, venting) | $7,500–$15,000+ |
| Licensed gas fitter labour rate | $95–$165 per hour |
North Vancouver is split between two separate municipalities — the District of North Vancouver and the City of North Vancouver — each with its own permitting desk, so confirming which one covers your address is an early step. Housing here skews toward 1960s–70s post-and-beam and split-level homes built on the slopes below Grouse and Seymour, many still running baseboard hydronic heat from the original boiler.
A lot of the post-and-beam homes on North Vancouver's slopes are on their original or first-replacement boiler, and once a major part fails, replacement is usually the more sensible move — particularly since these homes' baseboard hydronic systems tend to be straightforward to reconnect to a modern unit once the boiler itself is swapped.
Both the District of North Vancouver and the City of North Vancouver issue their own gas and mechanical permits, and CANRO confirms which applies before starting. The North Shore sees the heaviest rainfall in the region, which is a real factor in flue corrosion and condensation on older masonry chimneys sometimes used for venting on these hillside homes.
Beyond gas line sizing, a North Vancouver assessment pays particular attention to combustion air supply in basements with limited ventilation, vent termination clearances on multi-level lots, and physical access logistics — stairs, retaining walls, and narrow side yards all factor into labour time here more than on a typical flat city lot.
On split-level homes specifically, a technician also checks how the existing baseboard hydronic loop is zoned, since some of these houses were built with fewer zones than a homeowner might want today, and a boiler replacement is a natural point to discuss adding one if comfort has been uneven between levels.
Given how much rain falls here through the fall and winter, scheduling a replacement before the wettest stretch of the year gives a technician better working conditions for any exterior venting work, and avoids the scramble of an emergency swap during the peak of the wet season when demand across the North Shore is highest.
Safety note
Any boiler installation involves gas piping, combustion, and venting. If you ever smell gas, notice soot near the vent, or suspect a carbon monoxide problem, leave the house immediately and call FortisBC at 1-800-663-9911. Installation and venting on a gas boiler must be done by a Technical Safety BC licensed gas fitter — CANRO holds both a gas licence and a boiler licence.
Heavy coastal rainfall can contribute to corrosion on older exposed flues or masonry chimney venting, which is one reason a technician inspects venting condition closely before quoting a swap.
It depends on your exact address; the District of North Vancouver and the City of North Vancouver are separate governments with their own permitting departments, and CANRO confirms which applies.
Access can add labour time on lots with retaining walls, long stairs, or tight side yards, though it's usually a smaller factor than the condition of existing piping and venting.
The Capilano and Seymour watersheds supply very soft water, which generally means less mineral scale buildup over the system's life compared to well water.
Some hillside basements have limited natural ventilation, so a technician checks whether the mechanical room has adequate combustion air supply as part of a safe, code-compliant installation.
It varies with access — a straightforward swap is often a day, while jobs needing extra staging time for equipment on a steep lot can take longer.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.