🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Tempstar Furnace Installation in Surrey

What a new Tempstar gas furnace installation involves in a North Surrey lowland home near the Fraser River, and a ballpark cost figure.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

Tempstar is part of International Comfort Products, the same manufacturing group as KeepRite, and installing one follows the same fundamentals as any gas furnace job: sizing to the actual home, venting suited to the site, a pressure-tested gas connection, and full commissioning before the crew leaves. In North Surrey's lowland areas near the Fraser River, moisture management in the mechanical space is a real consideration alongside the standard installation steps.

Need a licensed gas fitter for your gas furnace? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

Replacing equipment in a damp mechanical space

Older homes in Bridgeview and similar lowland North Surrey neighbourhoods sometimes have basements or crawlspaces that run damper than higher-elevation properties, and that's a relevant factor when installing new equipment, not just when diagnosing an old furnace. CANRO looks at ventilation and moisture conditions in the mechanical space during the site visit, since a persistently damp environment can shorten the useful life of even a brand-new furnace if the underlying moisture issue isn't addressed alongside the installation.

Where practical, simple improvements like better crawlspace ventilation or a sump pump already in place are worth mentioning to the technician, since they can factor into cabinet placement and how the new furnace's base is protected from ground moisture over its service life.

Installation steps

  1. Disconnect and remove any existing furnace from gas, power, ductwork, and venting
  2. Adjust ductwork transitions to match the new furnace's connections and airflow requirements
  3. Set, level, and connect the furnace to gas, electrical, and venting per manufacturer specifications
  4. Pressure-test the gas line for leaks before first firing
  5. Commission the system fully: gas pressure, temperature rise, airflow, and every safety switch
  6. File a permit with the City of Surrey and complete the sign-off

Venting and elevation considerations

Most high-efficiency furnaces vent through sidewall PVC, with minimum clearances from windows, doors, and the property line. On lower-lying lots, drainage and grading around the foundation are worth a look alongside venting placement, since a termination point that sits too close to an area prone to standing water can be more exposed to debris and splashback over time. CANRO accounts for this during the site visit rather than treating every lot the same.

Cost and rebates

A residential Tempstar furnace installation in Surrey generally falls in the $4,500 to $9,500+ ballpark, depending on the equipment tier, venting complexity, and any ductwork or electrical work needed. It's a ballpark, not a quote; CANRO confirms exact pricing after a technician has seen your mechanical space in person.

FortisBC, CleanBC, and federal rebate programs change from year to year, and some higher-efficiency installations may qualify. Confirm current eligibility directly with the relevant program.

Not tied to one manufacturer

CANRO installs Tempstar furnaces alongside several other major brands and will tell you plainly if a different tier or brand fits your home and budget better.

Safety note

Connecting a furnace to gas and commissioning it is licensed gas fitter work under Technical Safety BC; CANRO holds gas licence LGA0043870. If you ever smell gas, leave the home and call FortisBC at 1-800-663-9911.

Frequently asked questions

Is CANRO an authorized Tempstar dealer?

No, CANRO is an independent licensed contractor. We install and service Tempstar furnaces along with several other major brands without claiming factory dealer status.

Does a damp basement affect a new furnace installation?

It's worth addressing alongside the installation, since ongoing moisture exposure can shorten the life of even new equipment if the underlying condition isn't managed.

How long does installation take?

A straightforward one-for-one replacement is usually a single day. More involved venting or ductwork work can extend it to two.

Is a permit required for a lowland-area installation?

Yes, a permit is required for residential gas furnace installations regardless of the lot's elevation, and CANRO files it with the City of Surrey.

Should I fix drainage issues before installing a new furnace?

If there's a known moisture problem in the mechanical space, addressing it alongside the installation is worth discussing with the technician rather than treating them as separate issues, since it can affect both cabinet placement and how long the new equipment lasts.

Are rebates available for a new furnace?

Sometimes, depending on the efficiency tier and current FortisBC, CleanBC, or federal program rules, which change over time. Confirm eligibility with the program directly.

Related CANRO services
More help in Surrey
The same topic in nearby areas

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Keep reading

Related furnace articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote