Installing a boiler for the first time in a Panorama Ridge home — new construction, an addition, or a switch from forced air — typically runs $6,500–$14,000+.
Tell us what you need—we’ll call you back fast.
Quick answer
A first-time boiler installation in Panorama Ridge typically runs $6,500–$14,000+, plus a $75–$200 gas permit. That's a 2026 public-market ballpark, not a quote — CANRO's certified technicians confirm the exact number after assessing the home's layout and heating needs.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
This is different from a replacement — it's typically a new build on one of the Ridge's newer subdivided lots, a home addition that needs its own zone, or a homeowner switching from forced-air to hydronic heat, often to add in-floor radiant heating in a renovated basement or new addition. Each scenario has a different starting point: new construction can be piped and vented to plan from the start, while retrofitting hydronic heat into an existing forced-air home means running new piping through walls and floors that weren't built for it.
Because the Ridge sees more wind exposure than lower-lying Surrey neighbourhoods, first-time installs also need the vent terminal placed with that in mind from day one — something a technician accounts for in the initial design rather than as an afterthought.
| Item | Notes |
|---|---|
| Unit | Sized to the home's heat loss and zoning plan |
| Piping | New runs for radiant floor, baseboard, or panel radiators |
| Venting | Wind-aware placement |
| Permit | $75–$200 |
It's also worth noting that homes on the Ridge sometimes have restricted crawlspace or basement access compared to newer, more open subdivisions elsewhere in Surrey, which can add labour time to running new piping regardless of whether it's a new build or a retrofit. A technician factoring that into the quote up front, rather than discovering it partway through, is part of why an in-person assessment matters more than a phone estimate for this kind of job.
Switching from forced air to a boiler is a meaningful decision, not something to do halfway — it's worth discussing with a technician whether a full hydronic retrofit makes sense for your addition or renovation plans, versus keeping forced air and adding a smaller supplemental system. There's no single right answer; it depends on the scope of your project and long-term plans for the home.
A common scenario: a homeowner finishing a basement on a newer Ridge subdivision lot wants radiant floor heat added as its own zone, tied into the existing boiler system. This is generally more straightforward than a full retrofit since the main boiler and piping infrastructure already exist — it's mostly a matter of adding the zone, the manifold, and the floor piping.
A different, more involved scenario: a homeowner converting an addition from electric baseboard to gas hydronic heat as part of a larger renovation, which means running an entirely new zone from scratch, sized and vented with the Ridge's wind exposure in mind from the start.
Safety note
Rotten-egg smell, a hissing sound near the meter or appliance, or a sounding CO detector all mean the same thing: get out of the house, leave the door open behind you, and call FortisBC's line at 1-800-663-9911 from somewhere safe before you do anything else.
It depends on the scope — new construction piped from the start can be similar in cost to a replacement, while retrofitting into an existing home is often more labour-intensive.
Yes, that's a common reason for a first-time boiler install, particularly in renovated basements or additions on the Ridge.
Yes, a Technical Safety BC gas permit, typically $75–$200, is required.
The technician places the vent terminal accounting for prevailing wind direction and potential snow/ice buildup on an elevated, exposed lot.
That depends on your renovation scope and heating preferences — it's worth a conversation with a technician rather than a default choice.
It varies significantly by scope; a new-construction install piped to plan is generally quicker than retrofitting hydronic heat into an existing home.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.