A yearly boiler service in Big Bend generally costs $250 to $450 and helps catch wear before it turns into a bigger repair.
Tell us what you need—we’ll call you back fast.
Quick answer
An annual service visit for a gas boiler in Big Bend, along Burnaby's stretch of the Fraser River, typically costs $250 to $450, covering a full inspection, combustion check, and routine maintenance. That's a 2026 market ballpark, not a quote — the exact price depends on the boiler type and what the technician finds, confirmed by CANRO during the visit.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A standard service includes inspecting the burner and heat exchanger, checking venting for blockage or corrosion, testing safety controls, and confirming gas pressure and combustion efficiency. In Big Bend specifically, technicians pay closer attention to exterior venting condition than they might elsewhere in Burnaby, since ground moisture near the river can accelerate corrosion on older metal flues faster than it would on a drier, higher-elevation property.
Homes with crawlspace mechanical rooms sometimes take a little longer to service simply because of access, and if the technician finds sediment or scale buildup warranting a full flush, that's a separate service at $200–$400.
| Service item | Typical inclusion |
|---|---|
| Combustion and burner check | Included in annual service |
| Venting inspection, including exterior corrosion check | Included in annual service |
| Safety control testing | Included in annual service |
| System flush (if needed) | $200–$400, quoted separately |
For a boiler that's already decades old, running in a crawlspace-access home near the river, annual service is generally cheaper over a few years than reacting to failures one at a time. Catching a corroding venting connector or a tired expansion tank during a scheduled visit avoids the more expensive scenario of dealing with it as an emergency mid-winter, and it gives you a clearer basis for deciding whether the unit still makes sense to keep repairing.
Booking service in late summer or early fall generally offers more scheduling flexibility than trying to get in once the weather turns. Gas boiler servicing must be carried out by a Technical Safety BC licensed gas fitter, and any parts replaced during the visit — including venting components showing corrosion — are quoted separately from the base service fee.
A thorough service visit ends with a plain-language rundown, not just a checklist — the technician should tell you what's holding up well, what's worth watching, and whether anything needs attention before the next scheduled visit. For a Big Bend home where the boiler is dealing with more ground moisture exposure than average, that kind of running record over a few years gives a much clearer picture of the unit's condition than any single inspection on its own.
Safety note
If you smell gas near the boiler, hear hissing, or a carbon monoxide alarm sounds at any point, leave the home first and call FortisBC from outside at 1-800-663-9911. Gas boiler service must be performed by a Technical Safety BC licensed gas fitter; CANRO holds gas licence LGA0043870 and boiler licence LBP0046450.
Typically $250 to $450, covering combustion, venting, and safety checks. Any parts found worn are quoted separately.
Not the frequency, but ground moisture near the river can accelerate venting corrosion, so technicians pay extra attention to that during the annual visit.
A burner and heat exchanger check, venting inspection, safety control testing, and a gas pressure check. A system flush is quoted separately if recommended.
Sometimes — tighter, lower-clearance mechanical spaces common in some Big Bend homes can add a bit of time compared to an open basement.
Many manufacturers require documented annual service to keep parts coverage valid — check your boiler's certificate for the specific terms.
Late summer or early fall, ahead of the heating season, generally offers the most scheduling flexibility.
They'll quote the repair separately so you can decide whether to proceed that visit or schedule it for later, rather than bundling it automatically into the service fee.
No, a flush is a separate service at $200–$400, recommended only if the technician finds sediment or scale buildup warranting it.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.