Combi boilers in Capitol Hill generally cost $9,000–$16,000 installed, a premium some hillside homeowners accept for a smaller mechanical footprint.
Tell us what you need—we’ll call you back fast.
Quick answer
A combi boiler installed in Capitol Hill, Burnaby typically costs $9,000 to $16,000, plus a $75–$200 gas permit. That's a 2026 market ballpark from public data, not a quote — CANRO's certified gas technicians confirm the exact figure once they've assessed your home's heating and hot water needs.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
A combi boiler covers both space heating and domestic hot water from one unit, with no separate storage tank taking up floor space. On Capitol Hill, where a lot of the post-war bungalow stock has compact basement or walk-out lower-level mechanical rooms built into the slope of the lot, freeing up that footprint can matter more than it would in a home with a large, flat, full-size basement. It's a common consideration for homeowners renovating a lower level into usable living space.
| Item | Typical cost |
|---|---|
| Combi boiler, installed | $9,000–$16,000 |
| Gas permit | $75–$200 |
A combi unit does more — modulating output for instant domestic hot water in addition to running heating zones — and that added capability shows up in both equipment and installation cost. It also typically needs a larger gas supply than a comparable space-heating-only boiler, which can mean the existing gas line into an older Capitol Hill home needs upsizing to meet the unit's peak demand.
The trade-off is the same one homeowners everywhere weigh: combi costs more upfront but saves the space a separate water heater would occupy. For a Capitol Hill property renovating a compact walk-out lower level, that space saving often carries real weight. For a home with ample mechanical room space and no renovation pressure, a standard boiler paired with its own tank can reach the same heating and hot water outcome at a lower installed cost — worth having a technician compare both for your specific home.
Beyond the equipment itself, two site-specific factors tend to shape a combi installation quote here more than they would on a flat, sheltered lot. The first is access — a steep driveway or exterior stairs down to a walk-out mechanical room adds labour time for bringing in the unit and running gas line, and that's worth accounting for realistically rather than assuming a standard flat-lot timeline. The second is venting placement, since combi units use sealed direct venting and the exposed, wind-facing side of a hillside home isn't always the ideal spot for a termination point even if it's the closest wall to the mechanical room.
A technician who visits the property before quoting can account for both, which is part of why an accurate combi boiler price for a Capitol Hill home generally requires an in-person look rather than a phone estimate based on square footage alone.
Safety note
Combi boiler installation, including gas line sizing and venting, must be performed by a Technical Safety BC licensed gas fitter under permit. CANRO holds gas licence LGA0043870 and boiler licence LBP0046450. If you ever smell gas, leave the home and call FortisBC at 1-800-663-9911.
It saves mechanical room floor space, which matters most in the compact basement or walk-out lower levels common on Capitol Hill's post-war lots.
It handles both heating and instant hot water, doing more work than a heating-only unit, and often needs a larger gas supply than the existing line was originally sized for.
Yes, venting placement needs to account for wind and weather exposure on the hill's more exposed sides, which a technician assesses during the site visit.
Not automatically — it depends on hot water demand, available gas supply, and whether freeing up mechanical room space is a priority for your project.
Sometimes, depending on the existing line size and the unit's peak demand. A technician checks this during the assessment before confirming the installed price.
Combi is typically a single higher installed price, while a standard boiler and separate tank are priced separately — a technician can total both scenarios for comparison.
Not fundamentally harder, but site access and venting placement need more careful planning, which a technician accounts for when assessing your specific property before quoting.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.