A ballpark look at combi boiler installation costs for Kensington-Cedar Cottage homes.
Tell us what you need—we’ll call you back fast.
Quick answer
A combi boiler installation in Kensington-Cedar Cottage typically runs $9,000 to $16,000 installed -- this is a ballpark based on 2026 public market data, not a quote, and CANRO's certified gas technicians confirm your exact price after seeing your home's existing setup.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
| Item | Typical Range (CAD) |
|---|---|
| Combi boiler, installed | $9,000 - $16,000 |
| City of Vancouver gas permit | $75 - $200 |
These figures reflect 2026 public market data across the region, not a fixed quote for your home -- combi units combine space heating and domestic hot water in one appliance, so pricing depends on both loads together, confirmed through an in-home assessment.
A number of older homes in this neighbourhood are running a separate boiler and a separate hot water tank, and when a basement renovation or suite conversion is already opening up the mechanical room, switching to a single combi unit frees up floor space that a storage tank would otherwise take. It's a bigger upfront cost than replacing either system alone, but it consolidates two appliances -- and two future repair calls -- into one.
Combi isn't the right fit for every household; homes with very high simultaneous hot water demand across multiple bathrooms sometimes still do better with a boiler plus a dedicated indirect tank, and a technician will walk through that trade-off honestly rather than defaulting to combi for every job.
A combi installation typically takes one to two days, longer if converting from a separate tank-and-boiler setup requires substantial re-piping. The technician confirms both the heating zone requirements and the hot water fixture count before sizing the unit, then pressure-tests the whole system before handing it over.
Financing options are worth asking about for a project this size, and FortisBC or CleanBC incentives sometimes apply depending on the unit's efficiency tier -- program terms change, so confirm current eligibility rather than assuming a past offer still stands.
Because combi consolidates two appliances into one, it's also worth timing the conversion around when your existing boiler or tank is due for replacement anyway, rather than retiring equipment with useful life left in it.
Smaller and mid-sized households in this neighbourhood -- a couple, a small family, or a home without a basement suite -- tend to be the best fit for combi, since simultaneous hot water demand stays manageable. Larger households or homes with a rental suite drawing hot water at the same time as the main house sometimes do better with a boiler paired with a dedicated storage tank instead.
A combi unit still needs an annual service like any boiler -- combustion check, heat exchanger inspection, and a check of the domestic hot water side specifically, since that part of the unit works harder than a heating-only boiler would. Skipping service on a combi tends to show up first as reduced hot water flow rather than a heating problem.
Because a combi failure affects both heat and hot water at once, some homeowners in this neighbourhood choose to keep a spare part or two on hand after the manufacturer's recommendation, though that's a conversation worth having directly with your technician rather than guessing.
If a combi conversion is part of a larger basement suite project, sequencing matters -- installing the unit before drywall and flooring go in avoids the extra cost and disruption of opening finished space later for piping or venting adjustments. CANRO can coordinate timing with your general contractor if the project involves one.
A combi quote covers the unit, venting to a compliant exterior termination, connection to your existing heating zones and domestic water supply, and the permit application. Converting from a separate tank-and-boiler setup adds the cost of decommissioning the old equipment and any re-piping that conversion requires.
Safety note
If you ever smell gas or suspect a leak near your boiler or water heater, leave the house immediately and call FortisBC's emergency line at 1-800-663-9911 before doing anything else -- that call is free and available any time of day.
It's a single appliance that provides both space heating and on-demand domestic hot water, replacing the need for a separate boiler and storage tank.
Combi units typically run higher than a boiler-only replacement since they include domestic hot water capacity in one unit.
It depends on the combi's output and the suite's fixture count -- a technician sizes this during the assessment rather than assuming one unit fits every configuration.
Often yes, since most combi units use power venting rather than a traditional atmospheric flue.
Typically one to two days, depending on how much re-piping the conversion requires.
A properly sized unit shouldn't, but undersizing for a household with heavy simultaneous demand is a real risk worth discussing with your technician.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.