Lougheed's remaining older single-family homes near the town centre call for practical hydronic upgrades, and CANRO sizes each system to the home's real needs.
Tell us what you need—we’ll call you back fast.
Quick answer
Hydronic heating in Lougheed most often involves updating an aging boiler and piping system in one of the area's remaining post-war single-family homes, since the neighbourhood's ongoing highrise and townhouse redevelopment has concentrated most new construction into multi-unit buildings rather than new detached houses. For the single-family homes CANRO still services here, correct sizing depends on the home's actual heat loss and honest evaluation of whether existing piping and radiators are worth keeping.
Need a licensed gas fitter for your hot water / boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Lougheed, straddling the Burnaby and Coquitlam border near Lougheed Town Centre, has seen substantial redevelopment into highrise towers and townhouse complexes over recent years, and that shift means most new hydronic installation demand in the immediate area now comes from those multi-unit projects rather than new detached homes. The single-family houses that remain on surrounding streets tend to be older, post-war construction, and hydronic work here is almost always a retrofit or upgrade project rather than new-build design.
For homeowners in these remaining single-family properties, the practical question is usually how much longer the existing system is worth maintaining versus investing in a meaningful upgrade, a decision that sometimes intersects with a homeowner's own plans for the property given the area's changing character.
Before recommending any hydronic upgrade in an older Lougheed home, we assess the condition of existing piping, radiators or baseboard elements, and the boiler itself, since a straight boiler swap without addressing degraded piping elsewhere can leave new equipment fighting old infrastructure. This assessment also calculates the home's actual current heat loss rather than assuming the original boiler's rated output is still the right benchmark.
For Lougheed homeowners undertaking a significant renovation rather than a straightforward boiler swap, radiant floor heat is worth considering for a basement or main-floor project, particularly where a concrete or engineered floor is already part of the renovation scope. Zoning the new radiant area separately from any retained baseboard or radiator zones keeps the system flexible and avoids forcing one thermostat to control very different types of heat emitters.
| Project Scope | Approach |
|---|---|
| Boiler swap only | Match new boiler to actual heat loss, keep existing radiators or baseboard |
| Basement renovation | Add radiant floor as its own independent zone |
| Full-home renovation | Mixed zoning: radiant where floors are replaced, baseboard elsewhere |
Boiler sizing depends on the home's actual calculated heat loss, factoring in window area, insulation, and total distribution length rather than the rated output of the equipment being replaced. A hydronic project in Lougheed generally runs in a ballpark of $6,500 to $14,000 or more, and that is a ballpark, not a quote, confirmed after an on-site heat-loss assessment.
Safety note
If you smell gas, hear a hissing sound near the boiler, water heater, or gas line, or notice a yellow or lazy burner flame, soot, or a stale, headachy feeling near the mechanical room, leave the house right away and call FortisBC at 1-800-663-9911 from a safe location before doing anything else. Gas piping, venting, and combustion equipment must only be installed or serviced by a Technical Safety BC licensed gas fitter.
That depends on your own timeline for the property; we give an honest assessment of what an upgrade buys in comfort and reliability so you can weigh it against your specific plans.
Yes, this is a common approach in a partial renovation, with the new radiant area zoned independently from the existing baseboard or radiator system.
If the existing piping has air locks, sediment buildup, or degraded sections, a new boiler alone won't resolve distribution problems; the piping itself often needs attention too.
We calculate current heat loss based on the home's actual insulation, window area, and layout rather than assuming the old boiler's rated output is still the correct benchmark.
Occasionally access or parking near the town centre can be affected by ongoing redevelopment, which we factor into scheduling for jobs in that immediate area.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.