Years near Burrard Inlet's damp air tend to be the real reason an older Port Moody boiler is finally being replaced rather than repaired one more time.
Tell us what you need—we’ll call you back fast.
Quick answer
Replacing an aging boiler with an IBC HC Series in a Port Moody home often follows years of corrosion-related wear that persistent dampness off Burrard Inlet accelerates on older equipment. A technician assesses how far that wear has progressed — on the boiler itself and on nearby fittings — before scoping a replacement rather than a repair. CANRO gives 2026 ballpark pricing once that on-site assessment is complete.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Port Moody sits at the head of Burrard Inlet, and homes near Moody Centre and along the hillside above the water deal with more sustained ambient humidity than properties further from the shoreline. Over fifteen or twenty years, that dampness works on metal fittings, connections, and an aging boiler's heat exchanger the same way it works on anything else exposed to it long enough. By the time corrosion has progressed to the point of affecting multiple components rather than one isolated part, replacement is usually the more sensible path than chasing repairs on a system that's fighting its environment as much as normal wear.
A new IBC HC Series doesn't eliminate that environmental factor, but starting with clean, corrosion-free connections buys a long runway before it becomes a consideration again.
Once corrosion and access are assessed, a typical Port Moody replacement includes:
A gas permit through the City of Port Moody covers this scope, and CANRO arranges that as part of the job.
| Factor | Repair may still make sense | Replacement is the better call |
|---|---|---|
| Corrosion extent | Isolated to one fitting or connection | Affecting multiple components across the system |
| Heat exchanger condition | No visible corrosion or scale damage | Corrosion has reached the heat exchanger itself |
| Fault history | First issue, otherwise reliable | Repeated failures tied to aging, corroded connections |
A full IBC HC Series install runs $6,500–$14,000+, and replacing an existing boiler runs $7,500–$15,000+. Jobs limited to the boiler and standard connections land toward the lower end; jobs needing multiple corroded fittings replaced, or chimney decommissioning on top of that, run toward the higher end.
These are 2026 public-market ballparks for the Port Moody area, not a quote — CANRO's certified technicians confirm the actual cost once they've assessed exactly how far corrosion has progressed on your system.
Safety note
Corroded fittings near a gas boiler are a reason to have the system properly assessed, but a gas smell is always the priority — leave the house immediately and call FortisBC at 1-800-663-9911 from a safe distance outside. Replacing gas connections and commissioning new equipment is licensed gas fitter work.
A technician's on-site assessment is the reliable way to know — isolated corrosion on a single fitting is often a straightforward repair, while corrosion affecting multiple connections or the heat exchanger itself generally points toward replacement being the more sensible long-term choice.
The same environmental dampness is still present, but starting with new, uncorroded connections means it takes a long time before that becomes a real factor again, especially with normal annual maintenance catching early wear.
Yes, a gas permit through the City of Port Moody is required, and CANRO arranges that as part of the job.
Reasonable ventilation improvements can help reduce ambient moisture buildup around the equipment, though some background humidity near the inlet is part of the local climate and can't be fully eliminated through mechanical room changes alone.
Generally, yes — an HC Series connects to standard hydronic distribution, and a technician confirms the loop is in good enough condition to pair with the new boiler as part of the assessment.
Yes — older homes near Moody Centre are assessed the same way as anywhere else in the city, with attention to access, venting placement, and the extent of any corrosion found during the visit.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.