🛡️ Licensed & Insured · TSBC Gas-Fitting LGA0043870 · Serving Metro Vancouver since 1999
★★★★★ 4.9 from 85+ Google reviews · info@canroheat.ca
Metro Vancouver HVAC · Since 1999

Navien NCB-H Replacement in Pitt Meadows

What goes into replacing an aging Navien NCB-H combi boiler in a Pitt Meadows home, from sizing to permits to install day.

★ 4.9/5 · 85+ reviews✅ Licensed & insured💰 Rebates & financing👨‍🔨 Since 1999

Get your free quote

Tell us what you need—we’ll call you back fast.

No obligation · We never share your info

🎉
25+ YearsServing Metro Vancouver since 1999
★
4.9 / 5 Rating85+ verified Google reviews
🛡️
Licensed & InsuredTSBC LGA0043870 · Boiler LBP0046450 · Red Seal · WorkSafeBC
💵
Rebates HandledCurrent BC programs—eligibility checked before installation

Quick answer

Replacing a Navien NCB-H in Pitt Meadows usually gets scheduled once repair costs stack up on a unit past 12–15 years, or after a heat exchanger fails. The process runs from an in-home assessment through permitting with the City of Pitt Meadows to a one-to-two-day install, priced as a 2026 ballpark and confirmed after that assessment.

Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.

Signs the Boiler Is Nearing the End

The clearest signal is a repair bill that keeps growing — a control board this year, a circulator pump the year before, and now a heat exchanger quote that costs nearly as much as a new unit. At that point the math tips toward replacement.

In Pitt Meadows specifically, we also see units installed in the earlier 2000s subdivision boom now reaching an age where manufacturers stop stocking every part readily, which stretches out repair timelines and pushes homeowners toward replacing rather than waiting on a backordered component.

What the Replacement Process Involves

  • An in-home assessment to confirm the new unit's output matches your home's heat loss and hot-water demand — not just a swap of the old numbers.
  • A gas permit application through the City of Pitt Meadows, filed before any work begins.
  • Venting review, since current code may require different clearances or a different vent run than when the old unit went in.
  • Removal of the old boiler and install of the new one, typically completed in a single day for a straightforward swap.
  • A commissioning check and a walkthrough of the new controls before the crew leaves.

Pitt Meadows Considerations That Affect the Job

Homes on the flatter, lower-lying parts of Pitt Meadows near the dike sometimes have mechanical rooms with higher humidity, which matters for venting material and placement on the new install. Newer Bonson-area homes usually have a more accessible mechanical room and a more straightforward swap, while older farmhouse-style properties can need extra work adapting gas line routing or venting to current code.

Because a fair amount of the local housing stock is only fifteen to twenty years old, most replacement calls here are for a first-generation combi unit reaching the end of its practical service life rather than a much older cast-iron system — which usually means a more predictable, lower-surprise install.

Replacement Cost Ballpark

A straightforward boiler install runs $6,500–$14,000+, and a full replacement of an existing system runs $7,500–$15,000+, depending on venting changes, gas line work, and access. These are 2026 public-market ballparks, not a quote — CANRO's certified technicians confirm the number for your home after the in-person assessment.

ScopeBallpark
New boiler install$6,500–$14,000+
Full system replacement$7,500–$15,000+
Gas permit$75–$200

Choosing What Goes In Next

Sticking with a combi unit that heats water and space off one heat exchanger makes sense for most Pitt Meadows homes with moderate hot-water demand. Larger households or homes with more fixtures running at once may be better served by a different configuration — that's a conversation to have with your technician during the assessment rather than a decision to make from a brochure, since matching output to your actual home avoids under- or over-sizing either way.

Safety note

If you smell gas, hear an unusual popping or rumbling from the boiler, or see soot near the vent, leave the house and call FortisBC's emergency line at 1-800-663-9911 before doing anything else. Do not try to relight a boiler that has shut itself down repeatedly.

Frequently asked questions

How long does a full boiler replacement take in Pitt Meadows?

Most straightforward swaps take one day; jobs needing new venting runs or gas line changes can take two.

Do I need a permit to replace a boiler?

Yes, gas and venting work always requires a permit through the City of Pitt Meadows, pulled before the job starts.

Is it cheaper to repair than replace?

For a newer unit with one failed part, repair is usually cheaper. Once repairs stack up or a heat exchanger fails, replacement is typically the better value.

Will my new boiler need a different vent location?

Sometimes. Code and clearance requirements can change between when your old unit was installed and today, so the assessment includes a venting review.

Can the same combi boiler style go back in?

In most cases yes, but your technician will talk through whether your household's hot-water use is still a good match before recommending the same configuration.

What happens to the old boiler?

It's removed and disposed of as part of the install; there's nothing further for the homeowner to arrange.

Related CANRO services
More help in Pitt Meadows
The same topic in nearby areas

Talk to a licensed CANRO gas fitter

Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.

Call (604) 359-1081 Email info@canroheat.ca
Good to know

Frequently asked questions

What HVAC services does CANRO offer in Metro Vancouver?
CANRO installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses and condos throughout the Lower Mainland.
How long has CANRO been in business?
CANRO has been serving the Greater Vancouver area since 1999. Our founder George is recognised by customers as one of the most experienced boiler and hydronic heating technicians in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are CANRO technicians licensed and insured?
Yes. CANRO holds Technical Safety BC contractor licences for gas (LGA0043870) and boilers (LBP0046450), our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 359-1081, email info@canroheat.ca, or use the booking form. Provide the address, equipment and symptoms so CANRO can confirm the service scope and current appointment availability.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
A qualifying heat-pump project may be eligible under current BC programs. Check the program requirements, equipment and any required pre-approval before installation. The Canada Greener Homes Grant and Loan are closed to new applications. The program administrator determines eligibility and funding.
How quickly can you replace a broken hot water tank?
Contact CANRO with the equipment details and whether there is active leaking or no hot water. Timing depends on assessment, equipment availability, access and the required work; confirm scheduling when booking.
Why should I choose CANRO over other HVAC companies?
CANRO has been operating in Metro Vancouver since 1999 with a 4.9-star rating from 85+ Google reviews. We specialise in difficult boiler systems (Viessmann, IBC, Baxi, Laars) that many companies do not service, we give honest options instead of upselling, and our work is performed by long-term staff — not subcontractors.
Keep reading

Related water heater articles

Reviews

What Metro Vancouver homeowners say

4.9
★★★★★
85+ verified Google reviews
★★★★★

“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”

Nadia Naderi
Nadia NaderiGoogle review
★★★★★

“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”

Arlene Colasurdo
Arlene ColasurdoGoogle review
★★★★★

“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”

B. Niek
B. NiekGoogle review

Need heat, hot water or cooling? Talk to a real technician today.

25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.

📞 Call (604) 359-1081 Get a free quote →
📞 Call nowFree quote