From Metrotown townhomes to older character homes near Burnaby Mountain, replacing an NFC-H here comes down to age, repair history, and mechanical room access.
Tell us what you need—we’ll call you back fast.
Quick answer
A Navien NFC-H in Burnaby is usually worth replacing once repairs start recurring, a major component like the heat exchanger fails, or the unit is old enough that continued repair costs start approaching what a new install would run. As a 2026 public-market ballpark, not a quote, boiler replacement generally costs $7,500–$15,000+, confirmed by CANRO's certified technicians after an in-home assessment.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Because Burnaby is on soft reservoir water, NFC-H units here tend to age a bit more gracefully on the heat exchanger side than units on Fraser Valley well water, which means the replacement conversation in Burnaby more often gets triggered by repeated smaller failures - ignition components, control boards, circulator pumps - accumulating over the years rather than a single scale-driven heat exchanger failure. Still, once a heat exchanger repair is on the table, generally $840–$2,180, that's usually replace-boiler territory on an older unit regardless of what caused it.
We look at the whole picture with a homeowner: how many repairs in the last two years, what they cost, how old the unit actually is, and whether the mechanical room itself needs any updating anyway. If a Metrotown-area townhome's NFC-H is a decade-plus old and on its third service call in eighteen months, that's usually a clearer replacement case than a five-year-old unit with one isolated component failure.
Newer townhome and condo mechanical closets built with a combi boiler in mind from the start tend to make a like-for-like swap relatively straightforward, since the gas line, vent, and water connections are already sized and positioned correctly - these jobs land toward the lower end of the $7,500–$15,000+ range. Older character homes near Burnaby Mountain or Capitol Hill, some with cast-iron radiator heating that needs adapting, or mechanical rooms that were never really designed for easy access, push toward the higher end due to added labour and sometimes additional plumbing work.
| Burnaby scenario | Cost tendency |
|---|---|
| Newer townhome, purpose-built mechanical closet, like-for-like swap | Lower end of range |
| Older character home, standard basement access | Mid-range |
| Older home with cast-iron radiator system needing adaptation | Upper end of range |
| Cramped or hard-to-access mechanical room requiring extra labour | Adds to base cost regardless of home age |
Since we're based in Burnaby, scheduling an in-home assessment here is usually straightforward. That visit is where we look at your existing mechanical room, venting, and gas supply and turn the general ranges above into a number specific to your home. From there it's a firm quote, a gas permit through the City of Burnaby (generally $75–$200), scheduling the install, and a final inspection sign-off. We won't promise a specific completion date before permits are reviewed, since that's outside our control, but we'll walk you through a realistic timeline for your job.
We hold gas licence LGA0043870 and boiler licence LBP0046450, and we're not shy about homeowners verifying that independently before hiring anyone for gas work.
If your old NFC-H's mechanical closet had access or clearance issues that made past repairs harder than they needed to be, replacement is the right moment to fix that - even small changes like adding isolation valves where there were none can meaningfully cut the labour time (and cost) of every future service visit.
Safety note
Any gas boiler replacement or venting work must be done by a Technical Safety BC licensed gas fitter. If you smell gas, leave the home immediately and call FortisBC at 1-800-663-9911 from a safe location.
Not inherently by location alone - cost is driven more by the home's specific mechanical room, venting, and access than by which city it's in, though shorter travel distance from our base can be a modest factor in scheduling, not price.
Often yes, if the existing venting is in good condition and code-compliant for the new unit, which keeps a replacement closer to the lower end of the cost range.
We'll assess clearance, combustion air, and isolation valve access during the in-home visit and flag anything worth addressing while the unit is already being swapped out.
Financing options can vary and are best discussed directly with our office during the quoting process rather than assumed from a general article.
Access and existing infrastructure condition matter more than most homeowners expect - a straightforward swap into an already-sized mechanical closet costs meaningfully less than one requiring new gas line or vent work.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.