The NTI GF Floor-Standing is one of NTIs flagship lines for Metro Vancouver homes. NTIs floor-standing condensing boiler line — designed for larger residential and light commercial applications exceeding the wall-hung BTU range.
Free in-home consultation. Free written quote. TSBC-licensed installers. FortisBC rebate paperwork included. Call (604) 359-1081 or request a quote online.
NTI GF Floor-Standing at a glance
| Spec | Value |
|---|
| Type | Floor-standing condensing boiler |
| Input BTU range | 199,000–500,000 BTU/h |
| AFUE | 95.0% |
| Cascade-capable | Yes |
| Heat exchanger | 316L stainless steel |
| Made in | Canada |
| Warranty | 10-yr commercial heat exchanger |
| Expected lifespan | 18-25 years in commercial service |
Who the NTI GF Floor-Standing is ideal for
- Large residential estates (4,500+ sq ft)
- Light commercial (restaurants, retail)
- Small strata buildings
- Multi-family residential
Metro Vancouver install considerations
Floor-standing install requires reinforced floor pad, crane or hand-truck access, larger gas line (typically 1-1.5"), and 4-6" venting.
Free quote · Free consultation
Considering a NTI GF Floor-Standing install in Metro Vancouver?
Get a free written quote and in-home consultation with a TSBC-licensed gas fitter. Three pricing tiers, FortisBC rebate paperwork included, no obligation.
📞 Call (604) 359-1081 Request a quote onlineWhat makes the NTI GF Floor-Standing stand out
- 199K-500K BTU range bridges residential to light commercial
- Cascade-capable for higher BTU needs
- Canadian-made
- FortisBC commercial rebate eligible
Warranty
10-year commercial heat-exchanger warranty.
The CANRO install process
- Free in-home consultation. A senior technician visits, measures your home heat-loss, reviews existing plumbing and venting, and asks about your priorities.
- Written quote with three tiers (good / better / best) within 1-3 business days. All scope items broken out — equipment, labour, gas work, permit, removal of old unit, rebate.
- Permit filed with your municipality and inspection coordinated.
- Install day(s). Most boiler swap-outs complete in 4-8 hours; complex retrofits take 1-3 days. Heating and hot water are restored end-of-day where possible.
- Manufacturer commissioning: combustion analysis at low and high fire, outdoor reset curve setup, app pairing, gas-pressure verification, walkthrough with you.
- FortisBC rebate filed and manufacturer warranty registered in your name.
Why CANRO for NTI installs
- NTI-trained Red Seal technicians. We commission to manufacturer specification — combustion analysis at low and high fire, outdoor reset configured to your homes heat-loss curve, gas-pressure verification.
- TSBC Class-A gas-fitting licence. Every install is permitted with the City of Vancouver or your municipality and inspected per BC code.
- NTI parts in every truck. Common service items stocked locally — first-visit repair rate is one of the highest in BC.
- FortisBC rebate paperwork done for you. Up to $1,500 rebate on qualifying condensing models, filed by CANRO on your behalf.
- 1-year labour warranty + manufacturer warranty registered in your name.
- 4.9★ from 85+ verified Google reviews. Serving Metro Vancouver since 1999.
Pricing for NTI GF Floor-Standing installation in Metro Vancouver
Indicative installed pricing for the NTI GF Floor-Standing in Metro Vancouver (Vancouver, Burnaby, Surrey, Richmond, North Vancouver, Coquitlam) including equipment, labour, permit, direct-vent installation, condensate drain, removal of old unit, commissioning, and FortisBC rebate filing:
| Tier | Installed (after rebate) | What you get |
|---|
| Good | $8,500–$11,000 | Standard install with all required items |
| Better | $10,500–$13,500 | Upgraded controls, smart thermostat, premium piping |
| Best | $13,000–$17,500 | Premium components, multi-zone, extended warranty |
Exact pricing depends on your specific home, existing gas/venting, and chosen options. All quotes provided in writing before work proceeds.
Free consultation: what we cover
- Home heat-loss calculation (Manual J) to right-size the NTI GF Floor-Standing for your home
- Peak DHW demand check (combi/tankless models)
- Existing gas-line capacity verification
- Venting path inspection — direct-vent through wall vs vertical
- Condensate drain routing and freeze-protection planning
- Mechanical-room space confirmation
- Discussion of three pricing tiers and what each includes
- FortisBC rebate confirmation — which programs apply
- Realistic install timeline
- No obligation — written quote within 1-3 business days
Free quote · Free consultation
Considering a NTI GF Floor-Standing install in Metro Vancouver?
Get a free written quote and in-home consultation with a TSBC-licensed gas fitter. Three pricing tiers, FortisBC rebate paperwork included, no obligation.
📞 Call (604) 359-1081 Request a quote onlineFrequently asked questions about the NTI GF Floor-Standing
Frequently asked questions
When to pick GF over wall-hung NTI?
When BTU need exceeds 199K (large home or light commercial). GF starts at 199K and goes to 500K per unit.
Cost for residential GF install?
$13,500-$22,000 for residential. Light commercial $25,000-$60,000+.
FortisBC rebate?
Yes — commercial rebates apply for larger BTU.
Lifespan?
18-25 years.
Free consultation?
Yes — engineering review included for commercial.
Cascade configurations?
Yes — multiple GF units networked for higher total BTU.
Made in Canada?
Yes.
Best for which applications?
Large residential, light commercial, small stratas.
Floor pad requirements?
Yes — units weigh 400-700+ lbs depending on size. Reinforced concrete pad typical.
Same-day service?
Yes — priority dispatch for commercial NTI installs.
CANRO Heating & Cooling — TSBC Class-A gas-fitting licence · Red Seal HVAC certified · WorkSafeBC and liability insured · 4.9★ from 85+ Google reviews · Serving Metro Vancouver since 1999.
