What a Trinity Lx replacement involves in a Royal City heritage home, where old chimney chases and tight basements shape the job.
Tell us what you need—we’ll call you back fast.
Quick answer
Replacement becomes the sensible choice once a Trinity Lx's exchanger has failed, or once an old venting route through a converted chimney chase is causing repeated faults that a repair alone won't fix. In New Westminster, planning a cleaner venting path is often as much a part of the job as the boiler itself.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
New Westminster's older neighbourhoods, particularly Queens Park and the streets closest to downtown, have some of the oldest housing stock in the Lower Mainland. Many of these homes have had a boiler retrofitted into a mechanical space that was never designed for one, often using a chimney chase that used to serve a coal or oil appliance decades ago.
A Trinity Lx vents as a sealed-combustion condensing boiler, and running that venting through an old, repurposed chase can work fine for years before a subtle sag or corrosion in the old chase material starts causing faults. Once that happens repeatedly, replacement is a chance to route the venting properly rather than patching the same weak point again.
New Westminster's water supply is soft, from the same Metro Vancouver reservoir system serving Burnaby and Coquitlam, so scale is rarely why a Trinity Lx is replaced here; age and venting condition are the more relevant local factors.
CANRO's assessment includes a careful look at the existing venting route, since in a heritage home that route may involve a chimney chase, tight joist bays, or a below-grade mechanical room with limited headroom.
The City of New Westminster requires a permit for gas appliance replacement and venting work, and CANRO applies for the permit and books the inspection as part of the job.
Where the existing venting route is marginal, replacement is the right time to re-route it properly rather than reuse a chase that has already caused problems. That sometimes means a different exterior termination point than the original boiler used.
Tight basement access in some Queens Park and Brow of the Hill homes also means equipment sizing and delivery logistics get discussed up front, so there are no surprises on install day.
These are 2026 public-market ballparks, not a quote. Venting work through a heritage home's chimney chase is the biggest variable in the final number, confirmed after the on-site assessment.
| Item | 2026 ballpark (CAD) |
|---|---|
| Boiler install (new condensing boiler) | $6,500 – $14,000+ |
| Full boiler replacement | $7,500 – $15,000+ |
| Diagnostic / service call | $90 – $150 (credited toward the job) |
Ask which FortisBC, CleanBC, or federal Greener Homes Loan programs currently apply to your household; the original Greener Homes Grant has closed and remaining eligibility varies.
A newly routed venting run should be checked during the first annual service to confirm it's holding up well, particularly if it passes through a converted chimney chase.
Beyond that, the maintenance schedule for a Trinity Lx is the same regardless of the home's age: an annual combustion and condensate check keeps the unit efficient.
Safety note
If you smell gas or notice staining near an old chimney chase used for venting, leave the house first and call FortisBC at 1-800-663-9911. Re-routing venting through heritage-home structural elements should only be done by a licensed gas fitter.
Rarely without significant modification, since a condensing boiler vents through smaller, corrosion-resistant pipe rather than a masonry chimney built for an older appliance.
Yes, the City of New Westminster requires a permit for gas appliance replacement and venting changes, and CANRO handles the application and inspection.
If the venting route was the cause, re-routing it as part of the replacement should resolve the recurring faults.
It depends on how much venting work is needed; a straightforward swap is quicker than a job requiring a new exterior termination point, and CANRO estimates after the site visit.
It can affect logistics on some Queens Park streets, which CANRO accounts for when scheduling the job.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.