Chilliwack's mix of old farmhouses and newer subdivisions means no two boiler installs are sized or vented quite the same way.
Tell us what you need—we’ll call you back fast.
Quick answer
Installing a new residential gas boiler in Chilliwack starts with a proper heat-loss calculation to size the unit, a check of the home's existing gas supply and venting path, and a decision between a standard or combi boiler based on your hot water needs. As a ballpark, not a quote, a new install runs roughly $6,500 to $14,000 or more, depending on equipment and how much venting or gas line work is required, confirmed by the CANRO office after an in-person assessment.
Need a licensed gas fitter for your gas boiler? Call CANRO at (604) 359-1081 — residential natural-gas heating and hot water across Metro Vancouver since 1999.
Chilliwack's housing stock ranges from century-old farmhouses along the valley floor to newer builds in Sardis and the Promontory area, and that range shows up directly in boiler installation quotes. An older farmhouse with an existing chimney and cast-iron radiators is a very different job from a newer home getting its first hydronic system installed, even if both end up with a similarly sized boiler. The heat-loss calculation a technician runs before recommending equipment accounts for insulation levels, window area, and ceiling height, not just the square footage on a listing.
| Boiler type | Typical venting |
|---|---|
| High-efficiency condensing | Sidewall PVC vent, no chimney needed |
| Standard non-condensing | Masonry or metal chimney |
| Replacing an old chimney-vented unit with a condensing model | New sidewall vent route required, chimney can often be capped |
A number of Chilliwack's older homes still have a masonry chimney originally shared between a furnace and a water heater, and converting to a high-efficiency condensing boiler usually means running new sidewall venting rather than reusing that chimney, since condensing appliances produce cooler, acidic flue gas that older masonry chimneys generally aren't built to handle safely.
Many properties outside Chilliwack's core, along the Vedder Canal and out toward the Fraser River floodplain, sit on acreages with private well water and gas lines that were sized decades ago for a single furnace or water heater. Adding a boiler to that supply, particularly one that will also feed an indirect water heater, often means checking whether the existing line can handle the combined gas load or whether it needs to be upsized as part of the installation.
As a ballpark, not a quote, a residential gas boiler installation in Chilliwack generally runs $6,500 to $14,000 or more. A straightforward swap where existing venting and gas supply are reused sits at the lower end. A conversion from an older chimney-vented boiler to a new condensing unit, or an install on a rural property needing gas line upsizing, sits higher, since both add real labour and material beyond the boiler itself.
The CANRO office confirms exact pricing after a technician has assessed your specific home, gas supply, and venting situation in person.
A mechanical permit through the City of Chilliwack is required for a new boiler installation, and all gas, venting, and combustion work must be carried out by a Technical Safety BC licensed gas fitter. CANRO holds provincial gas licence LGA0043870 and boiler licence LBP0046450, and handles the permit application as part of the installation.
The Canada Greener Homes Grant has closed, though the Canada Greener Homes Loan and current FortisBC or CleanBC programs may apply to a high-efficiency boiler upgrade. Confirm current eligibility rather than assuming a specific rebate applies to your project.
Safety note
If you ever smell gas or suspect a leak anywhere near the boiler or gas line, leave the home immediately and call FortisBC's emergency line at 1-800-663-9911 from a safe distance before doing anything else. All gas, venting, and combustion work must be completed by a Technical Safety BC licensed gas fitter.
It's done as part of the initial in-person assessment, factoring in insulation, window area, and construction rather than square footage alone, so the boiler is sized correctly before any equipment is ordered.
Generally no. Condensing boilers produce cooler, acidic flue gas that most older masonry chimneys aren't designed to handle, so a new sidewall PVC vent is typically installed instead, with the old chimney capped.
Often, since gas lines on older acreages were sometimes sized for a single appliance. Adding a boiler, especially one feeding an indirect water heater too, can require upsizing that line.
As a ballpark, not a quote, typically $6,500 to $14,000 or more depending on equipment and how much venting or gas line work is needed. The CANRO office confirms pricing after an assessment.
Yes, a mechanical permit through the City of Chilliwack, along with work performed by a Technical Safety BC licensed gas fitter. Your installer typically applies for the permit as part of the job.
Possibly through the Canada Greener Homes Loan or a current FortisBC or CleanBC program, since the federal grant has closed. Confirm current eligibility before budgeting around a specific rebate.
Family-run, TSBC-licensed (gas LGA0043870 · boiler LBP0046450), serving Metro Vancouver homes since 1999. Residential, natural gas only.
Call (604) 359-1081 Email info@canroheat.ca“Canro does an amazing job! Super professional and skilled with everything—boilers, furnaces, and AC. Always a pleasure working with them!”
“Five stars for Canro. We needed a replacement of a 30-year-old boiler. A new high-efficiency unit was installed—clean, professional work.”
“I can’t speak highly enough about George, who was recommended for a boiler service call for my parents’ home. George is excellent.”
25+ years keeping Metro Vancouver homes comfortable. Honest advice, upfront pricing, work that lasts.